Fereydoon Laal^1,2, Amir Hossein Khoshakhlagh³, Esmaeil Zarei^4,5, Rohollah Fallah Madvari⁶, Somayeh Farhang Dehghan^7,*

Sound & Vibration, Vol.56, No.4, pp. 297-306, 2022, DOI:10.32604/sv.2022.028255

Abstract After controls, including engineering and management, the final way to control noise is to use hearing protection devices. Due to the lack of a standardized questionnaire regarding investigating workers’ use of hearing protection devices on the basis of the BASNEF behavioral model, the present study was conducted to investigate the effect of health education based on the BASNEF model on the use of hearing protection devices in workers of an automobile manufacturing plant in Iran. This quasi-experimental and prospective intervention study was performed on 80 workers at an automobile manufacturing plant who are exposed to noise levels above 85 decibels… More >

Roman Vinokur^*

Sound & Vibration, Vol.56, No.4, pp. 293-295, 2022, DOI:10.32604/sv.2022.026300

Abstract This article has no abstract. More >

Y. K. Bharath^1,*, S. Veena²

Sound & Vibration, Vol.56, No.4, pp. 319-331, 2022, DOI:10.32604/sv.2022.015634

Abstract This paper presents the development of a dynamic Active Noise Control (ANC) algorithm aimed towards reducing the broadband noise inside the helmet earcups of a fighter aircraft pilot helmet. The dynamic ANC involves a Variable Step-Size Griffiths (VSSG) FxLMS algorithm to attenuate noise entering directly through helmet, a LMS based adaptive noise canceller to attenuate noise entering through the pilot microphone, and energy detectors for failure protection and optimized battery power usage. The algorithms are implemented on Texas Instruments’ TMS320C6748 processor and are tested in a helmet ANC experimental setup. More >

Roman Vinokur^*

Sound & Vibration, Vol.56, No.3, pp. 205-207, 2022, DOI:10.32604/sv.2022.025691

Abstract This article has no abstract. More >

Sajad Zare^1,2, Abdolrasoul Rahmani³, Javad Korouzhdeh⁴, Masoud Hajghani⁵, Rouhollah Rostami⁶, Reza Esmaeili^7,*

Sound & Vibration, Vol.56, No.3, pp. 275-291, 2022, DOI:10.32604/sv.2022.020207

Abstract Noise pollution is one of the most significant harmful physical factors in the industrial and occupational environments. Due to the high costs of exposure to excessive noise; continuous sound evaluation, propose and implement noise control plans in occupational environments is necessary. Thus, the present study aimed to review environmental sound measurements, drawing of noise maps, and prioritizing the engineering noise control methods using the Analytic Hierarchy Process (AHP). This study was a descriptive-analytical study that aimed to assess occupational noises and present a control plan in the City Gas Stations (CGSs) of Kerman, Iran in 2021. The present study was… More >

Jacob Thottathil Varghese^1,2,*, Sajan Thomas^1,2,3, Joselin Herbert⁴, Chacko Preno Koshy^1,2, Arjun Venugopal^1,2

Sound & Vibration, Vol.56, No.3, pp. 255-274, 2022, DOI:10.32604/sv.2022.016180

Abstract The arrangement of natural and physical features on the earth’s surface are a few among the countless items that govern the airborne acoustic transmission at boundary layers. In particular, if the acoustic waves are attributes of live concerts at open-air theatres, without losing the sheen and quality, the audience should certainly receive the unbroken depth of the performance. Hence, at all times, it is advisable to analyse the auditory receptiveness, particularly in all intended recreational spaces. The current pandemic circumstances and the mandated COVID-19 prevention protocols encourage gatherings in naturally ventilated outdoor regions than confined indoors. This work predicts and… More >

Sukhbir Shahid^*

Sound & Vibration, Vol.56, No.3, pp. 245-253, 2022, DOI:10.32604/sv.2022.016139

Abstract The potential use of sound and vibration for diagnostic and therapeutic purposes remains largely under-explored and under-estimated. Sound and vibrational energy has great positive impact on the mind and body. It could be particularly useful for psychosomatic diseases as a complementary therapy. Singing bowls, the spiritual ancient therapy has been claimed to aid in mind relaxation and painful and inflammatory conditions. Childhood asthma is an inflammatory airway disease and a psychosomatic disorder. The psychological management in it is often neglected leading to under-treatment or a relapse. Hence, we hypothesized that sound therapy with singing bowls might be useful as complementary… More >

Mohit Dhanda¹, Pankaj Pant², Sourabh Dogra¹, Arpan Gupta^1,*, Varun Dutt³

Sound & Vibration, Vol.56, No.3, pp. 235-243, 2022, DOI:10.32604/sv.2022.015615

Abstract With the Internet of Things (IoT) era dawning in, we are surrounded by a plethora of sensors. The present paper focuses on MEMS-based vibration measuring accelerometers, which are ubiquitously present in smartphones, tablets, smartwatches/bands, etc. These contact type vibration sensors have the unique advantage of being very small, low cost, low power, less weighing, and easily accommodatable in electronics. However, the accuracy of these sensors needs to be quantified with respect to more accurate sensors. With this objective, the paper presents a comparison of the relative sensitivity of a MEMS-based accelerometer (MPU 6050), a Geophone, and a sensor from Xiaomi… More >

S. Pradeepkumar^*, P. Nagaraj

Sound & Vibration, Vol.56, No.3, pp. 221-233, 2022, DOI:10.32604/sv.2022.014889

Abstract Vibrational characteristics in small horizontal axis wind turbine system are presented in this study with a system concept called tactile response and substructuring. The main focus is on managing the dynamic properties like vibration, noise, and harshness that occur during the operational mode. Tactile response is defined as the response of subsystem which is induced when a human body touches a vibrating system. Sub structuring is a computational method used to reduce the dynamic behavior of a large complex system with a smaller number of degrees of freedom without disturbing the mesh size of the model. Sub structuring has the… More >

Sheetal A. Singh, Suresh S. Balpande^*

Sound & Vibration, Vol.56, No.3, pp. 209-220, 2022, DOI:10.32604/sv.2022.014518

Abstract As of April 2019, India has 1,42,126 kilometres of National Highways and 67,368 kilometres of railway tracks that reach even the most remote parts of the country. Bridges are critical for both passenger and freight movement in the country. Because bridges play such an important part in the transportation system, their safety and upkeep must be prioritized. Manual Condition Monitoring has the disadvantage of being sluggish, unreliable, and ineffi- cient. The Internet of Things has given structural monitoring a boost. Significant decreases in the cost of electronics and connection, together with the expansion of cloud platforms, have made it possible… More >