Xueying Huang^*, Chun Yang^†, Chun Yuan^‡, Fei Liu^‡, Gador Canton^‡, Jie Zheng^§, Pamela K. Woodard^§, Gregorio A. Sicard^¶, Dalin Tang^||

Molecular & Cellular Biomechanics, Vol.6, No.2, pp. 121-134, 2009, DOI:10.3970/mcb.2009.006.121

Abstract Image-based computational models for atherosclerotic plaques have been developed to perform mechanical analysis to quantify critical flow and stress/strain conditions related to plaque rupture which often leads directly to heart attack or stroke. An important modeling issue is how to determine zero stress state from in vivo plaque geometries. This paper presents a method to quantify human carotid artery axial and inner circumferential shrinkages by using patient-specific ex vivo and in vivo MRI images. A shrink-stretch process based on patient-specific in vivo plaque morphology and shrinkage data was introduced to shrink the in vivo geometry first to find the zero-stress… More >

Nikolai Steklov^*, Ajay Srivastava^*, K.L.P. Sung^†, Peter C. Chen^†, Martin K. Lotz^*, Darryl D. D’Lima^‡

Molecular & Cellular Biomechanics, Vol.6, No.2, pp. 113-119, 2009, DOI:10.3970/mcb.2009.006.113

Abstract The biomechanical properties of articular cartilage change profoundly with aging. These changes have been linked with increased potential for cartilage degeneration and osteoarthritis. However, less is known about the change in biomechanical properties of chondrocytes with increasing age. Cell stiffness can affect mechanotransduction pathways and may alter cell function. We measured aging-related changes in the biomechanical properties of chondrocytes. Human chondrocytes were isolated from knee articular cartilage within 48 hours after death or from osteochondral specimens obtained from knee arthroplasty. Cells were divided into two age groups: between 18 and 35 years (18 -- 35); and greater than 55 years… More >

Yanan Wang^∗, Qing-Hua Qin^∗, Shankar Kalyanasundaram^∗

Molecular & Cellular Biomechanics, Vol.6, No.2, pp. 101-112, 2009, DOI:10.3970/mcb.2009.006.101

Abstract A mathematical model is developed for simulating anabolic behaviour of bone affected by Parathyroid Hormone (PTH) in this paper. The model incorporates a new understanding on the interaction of PTH and other factors with the RANK-RANKL-OPG pathway into bone remodelling, which is able to simulate anabolic actions of bone induced by PTH at cellular level. The RANK-RANKL-OPG pathway together with the dual action of TGF-$\beta$, which represent the core of coupling behaviour between osteoblasts and osteoclasts which are two cell types specialising in the maintenance of bone integrity, are widely considered essential for the regulation of bone remodelling at cellular… More >

Hai-Chao Han^†

Molecular & Cellular Biomechanics, Vol.6, No.2, pp. 93-100, 2009, DOI:10.3970/mcb.2009.006.093

Abstract Though tortuosity and kinking are often observed in various arteries and arterioles, little is known about the underlying mechanisms. This paper presents a biomechanical analysis of bent buckling in long arterial segments with a small initial curvature using a thick-walled elastic cylindrical arterial model. The critical buckling pressure was established as a function of wall stiffness, wall dimensions, and the axial tension (or axial stretch ratio). The effects of both wall dimensions and axial stretch ratio on the critical pressure, as well as the thin-walled approximation were discussed. The buckling equation sheds light on the biomechanical mechanism of artery tortuosity… More >

Sangho Kim^∗,†, Peng Kai Ong^*, Paul C. Johnson^‡

Molecular & Cellular Biomechanics, Vol.6, No.2, pp. 83-92, 2009, DOI:10.3970/mcb.2009.006.083

Abstract Recently, we reported that collision efficiency (fraction of total collisions that result in the formation of aggregates) between red blood cells was an important factor in the formation of aggregates in postcapillary venules. In the present study, we focus on how high molecular weight dextran influences the overall radial migration trend of red blood cells in the postcapillary venule along a longitudinal distance of 50 μm from the bifurcation which would in turn affect collision behavior of these cells. A radial migration index, which defines the extent of radial migration of individual cells relative to the vessel center, was found… More >

Weijuan Yao^*, Lanping Amy Sung^†

Molecular & Cellular Biomechanics, Vol.6, No.1, pp. 71-82, 2009, DOI:10.3970/mcb.2009.006.071

Abstract Erythrocyte tropomodulin (E-Tmod) is a tropomyosin-binding and actin capping protein at the point end of the filaments. It is part of a molecular ruler that plays an important role in generating short actin protofilaments critical for the integrity of the cell membrane. Here, with the use of \textit {E-Tmod+/lacZ} mice, we demonstrated a specific E-Tmod expression in horizontal cells (HCs) in the retina, and analyzed the stress-strain relationship of HCs, vertically oriented neurons, and retinal ganglial cells (RGC) under normal and high intraocular pressure (IOP). Since their dendrites are oriented laterally in a plane and form most complicated synapses with… More >

Arthur J. Sit^*, John H.K. Liu^†

Molecular & Cellular Biomechanics, Vol.6, No.1, pp. 57-70, 2009, DOI:10.3970/mcb.2009.006.057

Abstract Glaucoma is a leading cause of visual impairment and blindness worldwide. The main risk factor for glaucoma is an elevated intraocular pressure (IOP), which is also the only currently treatable risk factor. Despite its importance, our understanding of IOP is incomplete and our ability to measure IOP is limited. IOP is known to undergo both random fluctuations as well as variations following a circadian pattern. In humans, IOP is highest at night and lower during the daytime, largely due to changes in body position, although other factors appear to contribute. In rabbits, IOP is also highest at night and lower… More >

Tak-Sing Wong^*, Branden Brough^†, Chih-Ming Ho^∗,‡

Molecular & Cellular Biomechanics, Vol.6, No.1, pp. 1-56, 2009, DOI:10.3970/mcb.2009.006.001

Abstract Mimicking nature's approach in creating devices with similar functional complexity is one of the ultimate goals of scientists and engineers. The remarkable elegance of these naturally evolved structures originates from bottom-up self-assembly processes. The seamless integration of top-down fabrication and bottom-up synthesis is the challenge for achieving intricate artificial systems. In this paper, technologies necessary for guided bottom-up assembly such as molecular manipulation, molecular binding, and the self assembling of molecules will be reviewed. In addition, the current progress of synthesizing mechanical devices through top-down and bottom-up approaches will be discussed. More >

Chen X.Y.^∗,†, Liu Y.^2,‡, Fu B.M.^§, Fan J.T.^¶, Yang J.M.¹

Molecular & Cellular Biomechanics, Vol.5, No.4, pp. 275-284, 2008, DOI:10.3970/mcb.2008.005.275

Abstract Surface glycocalyx, as a barrier to material exchange between circulating blood and body tissues, can be treated as a periodic square array of cylindrical fibers. Previous study treated the glycocalyx as porous media and simulated by continuum theory. However, it has recently been found that a relatively hexagonal fibre-matrix structure may be responsible for the ultrafiltration properties of microvascular walls. The fibre-matrix is an underlaying three-dimensional meshwork with a fibre diameter of 10$\sim$12 nm and characteristic spacing of about 20 nm. The porous medium model does not consider the particle size, when the particle size is comparable to the fibre… More >

Chun Yang^∗,†, Dalin Tang^∗,‡, Shunichi Kobayashi^§, Jie Zheng^¶, Pamela K. Woodard^§, Zhongzhao Teng^*, Richard Bach^||, David N. Ku^∗∗

Molecular & Cellular Biomechanics, Vol.5, No.4, pp. 259-274, 2008, DOI:10.3970/mcb.2008.005.259

Abstract Many acute cardiovascular syndromes such as heart attack and stroke are caused by atherosclerotic plaque ruptures which often happen without warning. MRI-based models with fluid-structure interactions (FSI) have been introduced to perform flow and stress/strain analysis for atherosclerotic plaques and identify possible mechanical and morphological indices for accurate plaque vulnerability assessment. In this paper, cyclic bending was added to 3D FSI coronary plaque models for more accurate mechanical predictions. Curvature variation was prescribed using the data of a human left anterior descending (LAD) coronary artery. Five computational models were constructed based on ex vivo MRI human coronary plaque data to… More >