Open Access iconOpen Access

ARTICLE

crossmark

Assessment of Noise Exposure of Sawmill Workers in Southwest, Nigeria

Abiola O. Ajayeoba1,*, Adewoye A. Olanipekun2, Wasiu A. Raheem3, Oluwaseun O. Ojo4, Ayowumi R. Soji–Adekunle4

1 Department of Mechanical Engineering, Ladoke Akintola University of Technology, Ogbomoso, Nigeria
2 Department of Civil Engineering, Ladoke Akintola University of Technology, Ogbomoso, Nigeria
3 Department of Systems Engineering, University of Lagos, Lagos, Nigeria
4 Department of Mechanical Engineering, Adeleke University, Ede, Nigeria

* Corresponding Author: Abiola O. Ajayeoba. Email: email

Sound & Vibration 2021, 55(1), 69-85. https://doi.org/10.32604/sv.2021.011639

Abstract

Economic wood processing employs the use of industrial machines for cutting, shaping, milling, and sawing timber, thereby leading to the generation of high levels of noise. Published data from empirical studies have categorized noise as an environmental hazard of global significance. Furthermore, noise exposure limits for different industries and all the industrial machines available has not been formally established as it presently exists in developed nations around the world. Therefore, this study assessed the daily exposure of sawmills workers to noise in Southwestern Nigeria. Reconnaissance surveys were first carried out in Osun, Oyo, Ondo, Ekiti, Lagos, and Ogun States to select sawmills that were fully operational and fit for the study. Two fully functional sawmills in two cities of each State were eventually selected for data collection, making a total of 24 sawmills, while the Circular Machines (CM), Planer Machines (PM), and Band-saw Machines (BM) were the machines in each sawmill considered. Two machines each of CM, PM, and BM were considered in each sawmill, making a total of forty-eight (48) machines each of CM, PM, and BM. Sound data were collected between 7 am and 7 pm each day for six days (between Monday and Saturday) using Extech 407732 sound level meter and all stabilized measurements were taken three times at different intervals. The data collected were in three different periods: Machine No-work Period (NPm), Machine Idle Period (IPm), and Machine Working Period (WPm). A two–way Analysis of Variance (ANOVA) was carried out at P < 0.05 to determine whether there is a significant difference in the sound level average before and after the break, for both the idle and working periods of the three machines considered. This was also done to determine whether there is a significant difference between the sound level average of the results collected during idle and working periods of the three machines. Noise Pollution Levels (Lnp) ranged from 83.20 dB (PM) to 107.65 (BM) and 93.42 (CM and PM) – 116.00 (BM) respectively, while IPm also gave the least noise pollution level of 95.79 dB and WPm gave the highest level of 102.88 dB. The results revealed that all the machines’ Lnp values in the working period are more than the 90 dB acceptable limit the recommendation value of 90 dB while 89.6% of CMs, 75% of PMs, and 89.6% of BM had their Lnp above 90 dB in the idle period respectively. The minimum and the maximum noise dose levels for IPm, WPm and overall are 0.09 (BM) and 2.37 (CM), 0.50 (CM), and 4.77 (PM) and 0.69 (BM) and 6.64 (PM) respectively. The study found out that the fundamental contributing factors to the high noise levels in sawmills are poor machine maintenance, use of old and obsolete machines, poor housekeeping strategy, limited space, workers’ negligence, lack of PPE, and lack of occupational safety training. The study recommends that proper workplace practices such as use of personal protective equipment, new and modern machines, training, and occupational safety programmes be implemented in the considered sawmills.

Keywords


Cite This Article

Ajayeoba, A. O., Olanipekun, A. A., Raheem, W. A., Ojo, O. O., Soji–Adekunle, A. R. (2021). Assessment of Noise Exposure of Sawmill Workers in Southwest, Nigeria. Sound & Vibration, 55(1), 69–85.



cc This work is licensed under a Creative Commons Attribution 4.0 International License , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
  • 2101

    View

  • 1747

    Download

  • 0

    Like

Share Link