@Article{cmes.2021.017360,
AUTHOR = {Syed Ali Raza, Ahsan Ullah, Shuang He, Yifeng Wang, Jiangtao Li},
TITLE = {Empirical Thermal Investigation of Oil–Immersed Distribution Transformer under Various Loading Conditions},
JOURNAL = {Computer Modeling in Engineering \& Sciences},
VOLUME = {129},
YEAR = {2021},
NUMBER = {2},
PAGES = {829--847},
URL = {http://www.techscience.com/CMES/v129n2/44820},
ISSN = {1526-1506},
ABSTRACT = {The distribution transformer is the mainstay of the power system. Its internal temperature study is desirable for
its safe operation in the power system. The purpose of the present study is to determine direct comprehensive
thermal distribution in the distribution transformers for different loading conditions. To achieve this goal, the
temperature distribution in the oil, core, and windings are studied at each loading. An experimental study is
performed with a 10/0.38 kV, 10 kVA oil–immersed transformer equipped with forty–two PT100 sensors (PTs)
for temperature measurement installed inside during its manufacturing process. All possible locations for the
hottest spot temperature (HST) are considered that made by finite element analysis (FEA) simulation and losses
calculations. A resistive load is made to achieve 80% to 120% loading of the test transformer for this experiment.
Working temperature is measured in each part of the transformer at all provided loading conditions. It is observed
that temperature varies with loading throughout the transformer, and a detailed map of temperature is obtained in
the whole test transformer. From these results, the HST stays in the critical section of the primary winding at all
loading conditions. This work is helpful to understand the complete internal temperature layout and the location
of the HST in distribution transformers.},
DOI = {10.32604/cmes.2021.017360}
}