TY  - EJOU
AU  - Li, Yonghua 
AU  - Bai, Xiaoning 
AU  - Shi, Shanshan 
AU  - Wang, Shenxuan 

TI  - Dynamic Fatigue Reliability Analysis of Transmission Gear Considering Failure Dependence
T2  - Computer Modeling in Engineering \& Sciences

PY  - 2022
VL  - 130
IS  - 2
SN  - 1526-1506

AB  - Multiple failure modes and strength degradation are usually inherent in the gear transmission system, which brings new challenges for conducting fatigue reliability analysis and design. This paper proposes a novel dynamic fatigue reliability analysis method for failure dependence and strength degradation based on the combination of the Copula function and Gamma process. Firstly, the dynamic simulation model of the gear transmission system is established to obtain the dynamic stress-time history. The Gamma process is then used to describe the strength degradation to establish the dynamic stress-strength interference model. The marginal distribution functions of tooth contact fatigue and dedendum bending fatigue are calculated respectively based on the dynamic interference model. Finally, the joint distribution of the two failure modes can be obtained by the t-Copula function to characterize the failure dependence, and so the dynamic fatigue reliability considering failure dependence can be estimated. The effectiveness of the proposed method is illustrated with examples. The results reveal the temporal law of reliability and the effects of failure dependence on dynamic fatigue reliability.
KW  - Gear transmission system; failure dependence; dynamic fatigue reliability; the Gamma process; the Copula function

DO  - 10.32604/cmes.2022.018181