TY - EJOU AU - Yang, Binxin AU - Ouyang, Jie AU - Jiang, Tao AU - Liu, Chuntai TI - Modeling and Simulation of Fiber Reinforced Polymer Mold Filling Process by Level Set Method T2 - Computer Modeling in Engineering \& Sciences PY - 2010 VL - 63 IS - 3 SN - 1526-1506 AB - A gas-solid-liquid three-phase model is proposed for fiber reinforced composites mold filling process. The fluid flow is described in Eulerian coordinate while the dynamics of fibers is described in Langrangian coordinate. The interaction of fluid flow and fibers are enclosed in the model. The influence of fluid flow on fibers is described by the resultant forces imposed on fibers and the influence of fibers on fluid flow is described by the momentum exchange source term in the model. A finite volume method coupled with a level set method for viscoelastic-Newtonian fluid flow is used to solve the model. The direct dynamic numerical simulation for reinforced composites mold filling process is realized. The information about fiber transformation and orientation and interface evolution are obtained dynamically as well as the information about pressure and velocity etc. The skin-core-skin structure of fibers under different slenderness ratios during the mold filling process is captured which is in accordance with experimental results. KW - fiber reinforced composites KW - mold filling KW - finite volume method KW - viscoelastic KW - fiber orientation DO - 10.3970/cmes.2010.063.191