TY - EJOU AU - Dyi-Cheng, AU - Syong, Syuan-Yi TI - Finite Element Simulations of Four-holes Indirect Extrusion Processes of Seamless Tube T2 - Computers, Materials \& Continua PY - 2009 VL - 13 IS - 3 SN - 1546-2226 AB - Finite element simulations are performed to investigate the plastic deformation behavior of Ti-6Al-4V titanium alloy during its indirect extrusion through a four-hole die. The simulations assume the die, mandrel and container to be rigid bodies and ignore the temperature change induced during the extrusion process. Under various extrusion conditions, the present numerical analysis investigates the effective stress and profile of product at the exit. The relative influences of the friction factors, the temperature of billet and the eccentricity of four-hole displacement are systematically examined. The simulations focus specifically on the effects of the friction factor, billet temperature and eccentricity ratio of the four-hole die on the maximum load and effective stress induced within the billet and the taper angle of the extruded tubes. The simulation results provide a useful insight into the optimal processing conditions for the four-hole indirect extrusion of seamless titanium alloy tubes. KW - Finite element KW - indirect extrusion KW - seamless titanium alloy tubes DO - 10.3970/cmc.2009.013.191