@Article{cmc.2022.024762,
AUTHOR = {Rishi Dewan, Adarsh Kumar, Mohammad Khalid Imam Rahmani, Surbhi Bhatia, Md Ezaz Ahmed},
TITLE = {Simulation and Modelling of Water Injection for Reservoir Pressure Maintenance},
JOURNAL = {Computers, Materials \& Continua},
VOLUME = {72},
YEAR = {2022},
NUMBER = {3},
PAGES = {5761--5776},
URL = {http://www.techscience.com/cmc/v72n3/47461},
ISSN = {1546-2226},
ABSTRACT = {Water injection has shown to be one of the most successful, efficient, and cost-effective reservoir management strategies. By re-injecting treated and filtered water into reservoirs, this approach can help maintain reservoir pressure, increase hydrocarbon output, and reduce the environmental effect. The goal of this project is to create a water injection model utilizing Eclipse reservoir simulation software to better understand water injection methods for reservoir pressure maintenance. A basic reservoir model is utilized in this investigation. For simulation designs, the reservoir length, breadth, and thickness may be changed to different levels. The water-oil contact was discovered at 7000 feet, and the reservoir pressure was recorded at 3000 pounds per square inch at a depth of 6900 feet. The aquifer chosen was of the Fetkovich type and was linked to the reservoir in the j+ direction. The porosity was estimated to be varied, ranging from 9% to 16%. The residual oil saturation was set to 25% and the irreducible water saturation was set at 20%. The vertical permeability was set at 50 md as a constant. Pressure Volume Temperature (PVT) data was used to estimate the gas and water characteristics.},
DOI = {10.32604/cmc.2022.024762}
}