@Article{ee.2026.086355,
AUTHOR = {Ali H. Numan, Ashwaq Q. Hameed},
TITLE = {Predefined-Time Adaptive Sliding Mode Speed Control of PMSM Drives Using a Switchable Power Exponent and Dual-Gain Surface},
JOURNAL = {Energy Engineering},
VOLUME = {},
YEAR = {},
NUMBER = {},
PAGES = {{pages}},
URL = {http://www.techscience.com/energy/online/detail/27992},
ISSN = {1546-0118},
ABSTRACT = {Accurate and rapid speed response during different operating conditions of permanent magnet synchronous motor (PMSM) drives is a critical requirement in industrial automation, robotics, CNC, and electric vehicle applications. This paper proposes a new predefined-time adaptive sliding mode speed control (PTASMSC) strategy for high-performance surface-mounted permanent magnet synchronous motor (SMPMSM) drives. The proposed PTASMSC controller is designed to overcome the well-known trade-off between fast convergence and chattering by combining a switchable power exponent and a dual-gain surface. This architecture will accelerate the speed error convergence during large transient deviations while effectively suppressing high-frequency chattering at steady-state conditions. The control algorithm is verified using MATLAB simulations and hardware-in-the-loop (HIL) on the OPAL-RT real-time platform. The simulation and experimental results of seven case studies conducted under different speed profiles and four disturbance scenarios demonstrated enhanced motor speed tracking accuracy and reduced transient duration of the proposed PTASMSC over conventional proportional integral (PI) and standard predefined-time sliding mode control (PTSMC) methods. Quantitative analysis confirms that the proposed method eliminates maximum overshoot 0% and minimizes the transient settling time to just 0.035 s—representing a 75% speedup compared to the conventional PI baseline. Furthermore, the adaptive dual-gain mechanism restricts the maximum speed drop ratio to a negligible 0.04% with a near-instantaneous recovery time of 0.01 s while maintaining a smooth quadrature current <math id="mml-ieqn-1"><msub><mi>i</mi><mrow><mi>q</mi></mrow></msub></math> profile. The real-time HIL implementation validates the robustness and practical feasibility of the proposed PTASMSC for industrial PMSM speed regulation.},
DOI = {10.32604/ee.2026.086355}
}