TY  - EJOU
AU  - Chen, Zebing 
AU  - Wang, Yang 
AU  - Wu, Hong 
AU  - Zhao, Wenbin 
AU  - Yan, Jinjun 
AU  - Peng, Luyao 
AU  - Zhao, Yugang 
AU  - Wang, Zilong 
AU  - Li, Kang 
AU  - Meibodi, Saleh S. 
AU  - Moosazadeh, Mohammad 
AU  - Mohtaram, Soheil 

TI  - Experimental Investigation on Heating Performance and Frosting Behavior of an Integrated R290 Secondary Loop Heat Pump
T2  - Frontiers in Heat and Mass Transfer

PY  - 
VL  - 
IS  - 
SN  - 2151-8629

AB  - Energy storage batteries require strict thermal management due to temperature sensitivity, operating optimally within a narrow thermal range. Simultaneously, control rooms demand stable and comfortable ambient conditions for staff staying long-term. Conventional temperature control systems typically employ isolated solutions, resulting in functional fragmentation and inefficient resource utilization. To address these challenges, this study proposes and implements an integrated R290 secondary loop heat pump air-conditioning system designed to simultaneously manage the thermal environments of both energy storage batteries and control rooms. By adopting a secondary-loop coupling architecture, all thermal regulation is achieved indirectly via indirect heat transfer with a circulating ethylene glycol-based coolant, eliminating the risk of direct refrigerant (R290) exposure in occupied spaces and enhancing safety. The system supports multiple operational modes, enabling flexible and efficient dual-zone climate control. The heating performance—evaluated in terms of heat exchange capacity and coefficient of performance (COP)—is analyzed under varying ambient temperatures and compressor speeds. Additionally, the frosting behavior of the outdoor heat exchanger and its impact on heat transfer and system performance are examined. Results showed heat output ranged from 3.01 to 4.27 kW, and COP varied between 1.9 and 2.8. Ambient temperature (more dominant than compressor speed) and speed both affected performance: higher speed/warmer temperatures improved heat transfer efficiency; low temperatures accelerated frosting (e.g., −5°C reduced heat output by 19.67% and COP by 31.13%, vs. 13.72% and 12.40% at 5°C). These findings provide critical insights for optimizing heat transfer design and operation of integrated thermal management systems in energy storage facilities.
KW  - R290 secondary loop; energy storage battery; control room; heating performance; frosting characteristics; COP

DO  - 10.32604/fhmt.2026.077274