TY  - EJOU
AU  - Boonloi, Amnart 
AU  - Jedsadaratanachai, Withada 

TI  - Numerical Assessments on Flow Topology and Heat Transfer Behavior in a Round Tube Inserted with Three Sets of V-Ribs
T2  - Frontiers in Heat and Mass Transfer

PY  - 2023
VL  - 21
IS  - 1
SN  - 2151-8629

AB  - Simulation of fluid-flow topology and thermal behavior in a round tube heat exchanger (RTHX) installed by three
V-rib sets is reported. The expected phenomena for the rib installation are the generated vortex flow, impinging
flow, greater fluid blending and thermal boundary layer disturbance (TBLD). These phenomena are key causes
of the augmentation of heat transfer potentiality and thermal efficiency of the RTHX. Effects of rib height (b<sub>1</sub>
= 0.05D – 0.25D and b<sub>2</sub> = 0.05D – 0.25D), rib pitch or rib spacing (P = D, 1.5D and 2D) and fluid directions
(positive x (+x flow direction) and negative x (–x flow direction)) on fluid-flow behavior and thermo-hydraulic
characteristic are considered. The laminar air flow under Reynolds numbers between 100 to 2000 calculated by
the inlet condition is focused. The current numerical problem of the RTHX fitted with V-ribs can be solved by
a commercial code/program (the finite volume analysis). Firstly, the tested-tube model is carefully validated. The
preliminary results of the validation show that the numerical model has great consistency for fluid flow and thermal
structure prediction. The simulated outcomes are plotted in features of streamlines flow, local Nusselt number
contours and temperature contours which explain the mechanism within the RTHX. The thermal assessments
within the RTHX are performed with dimensionless variables, which include the Nusselt number, the friction factor
and the thermal enhancement factor. The important mechanisms: vortex flow, impinging flow, better fluid blending
and TBLD, are observed when the RTHX are installed with ribs. The maximum heat transfer potentiality is 19 times
upper than that of the RTHX without ribs and the optimum thermal enhancement factor is around 4.10.
KW  - V-rib; turbulator; simulation; thermal performance; heat exchanger tube

DO  - 10.32604/fhmt.2023.041547