
@Article{hmt.v3.1.3004,
AUTHOR = {Jiwon Yu
, Seok-Won Kang, Saeil Jeon, Debjyoti Banerjee},
TITLE = {HEAT TRANSFER MEASUREMENTS FOR FLOW OF NANOFLUIDS  IN MICROCHANNELS USING TEMPERATURE NANO-SENSORS},
JOURNAL = {Frontiers in Heat and Mass Transfer},
VOLUME = {3},
YEAR = {2012},
NUMBER = {1},
PAGES = {1--9},
URL = {http://www.techscience.com/fhmt/v3n1/55691},
ISSN = {2151-8629},
ABSTRACT = {Experiments were performed to study the forced convective heat transfer of de-ionized water (DI water) and aqueous nanofluids in a microchannel 
and temperature measurements were obtained using an array of nanosensors (i.e., thin film thermocouples or “TFT”). Heat flux values were 
calculated from the experimental measurements for temperature recorded by the TFT array. The experiments were performed for the different test 
fluids where the flow rate, mass concentration (of silica nanoparticles ~10-30 nm diameter) in the colloidal suspension and the wall temperature 
profile (as well as applied heat flux values) were varied parametrically. <br/>
Anomalous enhancement of the convective heat flux values were observed for the different experimental conditions. Precipitation of 
nanoparticles on heat exchanging surfaces was confirmed using materials characterization techniques such as Scanning Electron Microscopy (SEM) 
and Energy Dispersive X-Ray spectroscopy (EDX). It is suggested that moderate precipitation of nanoparticles lead to formation of isolated nanofins 
which cause the observed enhancements in forced convective heat transfer (due to increase in the effective surface area), while excessive 
precipitation results in scaling (fouling) of the surface which causes degradation of the heat flux values (compared to that of the pure solvent). This 
study shows that the surface conditions play a dominant role in determining the efficacy for heat transfer in multi-phase flows – particularly those 
involving nanoparticle coatings and nanoparticle suspensions (compared to the bulk properties of the test fluid itself).},
DOI = {10.5098/hmt.v3.1.3004}
}



