@Article{10798587.2017.1302712,
AUTHOR = {Young Hun Song, Suk Lee, Kyoung Nam Ha, Kyung Chang Lee},
TITLE = {Automatic FIBEX Generation for Migration from CAN Message Description Format  to Flexray Fibex Format},
JOURNAL = {Intelligent Automation \& Soft Computing},
VOLUME = {24},
YEAR = {2018},
NUMBER = {4},
PAGES = {683--691},
URL = {http://www.techscience.com/iasc/v24n4/39794},
ISSN = {2326-005X},
ABSTRACT = {Recently, FlexRay was developed to replace the controller area network (CAN) protocol in the chassis 
network systems to provide high-speed data transmission as well as hardware redundancy for safety. 
However, FlexRay network design is more complicated than with CAN protocol, which has been an 
in-vehicle network (IVN) standard for car manufacturers for decades, because the FlexRay has many 
parameters such as the base cycle or slot lengths. To simplify the FlexRay network design and assist 
vehicle network designers in configuring a FlexRay network, this paper presents an automatic field 
bus exchange format (FIBEX) generation method for migration from the CAN message description 
format such as the DBC format to the FlexRay FIBEX format. The automatic FIBEX generation method is 
examined by simulating a chassis networking system using a DBC benchmark tool, which demonstrates 
the feasibility of the system and the reduction in workload for network designers.},
DOI = {10.1080/10798587.2017.1302712}
}