TY  - EJOU
AU  - Yu, Xudong 
AU  - Shen, Hai 
AU  - Lu, Jingyuan 
AU  - Yuan, Shangqin 
AU  - Huang, Ming 

TI  - Advancing Ultrasonics-Based Techniques for Non-Destructive Evaluation of Additive Manufactured Composites
T2  - The International Conference on Computational \& Experimental Engineering and Sciences

PY  - 2024
VL  - 32
IS  - 2
SN  - 1933-2815

AB  - The continuous advancement of Additive Manufacturing (AM) technologies has revolutionized the production of intricate components and reinforced composites with tailored mechanical properties. However, the variability in AM techniques and processing parameters often leads to discrepancies  in fibre volume fraction, porosity, and interfaces in AM composites, resulting  in dispersed elastic moduli and mechanical responses, which necessitates robustness non-destructive evaluation (NDE) methods. Additionally, AM introduces new defect morphologies, dimensions, and locations, demanding new and more reliable non-destructive testing (NDT) techniques.<br/>
This research commences by quantifying orientation-dependent mechanical properties of laser-sintered nanocomposites of carbon nanotube (CNT) reinforced polyamine (PA). An immersion ultrasonic technique is employed to measure the energy loss and propagation speeds of ultrasonic elastic waves in the CNT-coated PA12 composites. The study investigates the relationship of process-structure-property between ultrasonic attenuation/speed and process parameters, linking them to the layer-by-layer fusion induced microstructures and internal imperfections, such as interlayer/innerlayer defects, fibre agglomeration and interface quality of fibre/matrix. The results are validated using optical microscopy and mechanical testing.<br/>
Furthermore, the study proposes an immersion ultrasonics-based method with inversion schemes for measuring the effective anisotropic stiffness matrix of continuous fibre reinforced composites. Material properties of thin composite plates are derived by numerically inverting the transmitted ultrasonic fields obtained for different incident angles, thus finding the best-fit solution for all the independent components of stiffness matrix. Two types of T700/PA plates with transversely isotropic and orthotropic symmetries are experimentally characterized, and the reliability of the measured stiffness properties is verified via mechanical testing.<br/>
Moreover, the research presents a single-sided, air-coupled ultrasonic NDT capability  for automated fiber placement (AFP) based composite structures, via the generation and reception of the Lamb-type ultrasonic guided waves, scanning over the surface of AM plate-like structures. The baseline of intact quality is established; temporal and frequential signal processing procedures are performed to quantify the reflection and transmission coefficients and mode conversion of guided waves scattered by defects in manufactured composites. The validity and precision of defect detection are verified by the monitoring data  during  the AM process, and the associated in-situ NDT module can potentially be integrated into  future AM systems.<br/>
The proposed series of techniques demonstrate the potential and strong incentives of ultrasonics-based NDT&E for in-process and continuous monitoring of AM composites, aiming at quality control and structural safety inspection in end-use applications.
KW  - AM composites; ultrasonics-based NDE; inversion techniques; defect detection

DO  - 10.32604/icces.2024.011546