@Article{jrm.2022.024971,
AUTHOR = {Claudio Del Menezzi, Antonio Pizzi, Siham Amirou, Xuedong Xi},
TITLE = {MUF Resins Improved by Citric Acid as Adhesives for Wood Veneer Panels},
JOURNAL = {Journal of Renewable Materials},
VOLUME = {11},
YEAR = {2023},
NUMBER = {2},
PAGES = {539--553},
URL = {http://www.techscience.com/jrm/v11n2/49904},
ISSN = {2164-6341},
ABSTRACT = {<p>This article presents the first applied results of using citric acid in combinations with a melamine-urea-formaldehyde (MUF) resin for bonding wood veneers. The chemical reactions involved are shown based on a MALDI ToF analysis of the reaction of the MUF resin with citric acid. The preliminary results of the physical and mechanical properties of the LVL prepared are also presented. Veneers from <i>Populus</i> sp were used to manufacture 5-layer laminated veneer lumber (LVL) of small dimensions. Five combinations of the amount of citric acid, MUF spread rate and pressing parameters were tested. LVL bonded with 20% of citric acid + 100 g/m<sup>2</sup> of MUF, hot-pressed using a 3-step process with maximum 1.5 MPa of pressure yielded the board with better dimensional stability and mechanical properties. It could be concluded that citric acid in combination with MUF can be used for bonding wood veneer and the research should be continued to study further the parameters involved and to enhance the results.</p>
},
DOI = {10.32604/jrm.2022.024971}
}