
@Article{jrm.2023.025241,
AUTHOR = {Junzhen Di, Xueying Sun, Siyi Zhang, Yanrong Dong, Bofu Yuan},
TITLE = {Optimization of Preparation of Fe<sub>3</sub>O<sub>4</sub>-L by Chemical Co-Precipitation and Its Adsorption of Heavy Metal Ions},
JOURNAL = {Journal of Renewable Materials},
VOLUME = {11},
YEAR = {2023},
NUMBER = {5},
PAGES = {2209--2232},
URL = {http://www.techscience.com/jrm/v11n5/51706},
ISSN = {2164-6341},
ABSTRACT = {To address the serious pollution of heavy metals in AMD, the difficulty and the high cost of treatment, Fe<sub>3</sub>O<sub>4</sub>-L was prepared by the chemical co-precipitation method. Based on the single-factor and RSM, the effects of particle size, total Fe concentration, the molar ratio of Fe<sup>2+</sup> to Fe<sup>3+</sup> and water bath temperature on the removal of AMD by Fe<sub>3</sub>O<sub>4</sub>-L prepared by chemical co-precipitation method were analyzed. Static adsorption experiments were conducted on Cu<sup>2+</sup>, Zn<sup>2+</sup> and Pb<sup>2+</sup> using Fe<sub>3</sub>O<sub>4</sub>-L prepared under optimal conditions as adsorbents. The adsorption properties and mechanisms were analyzed by combining SEM-EDS, XRD and FTIR for characterization. The study showed that the effects of particle size, total Fe concentration and the molar ratio of Fe<sup>2+</sup> to Fe<sup>3+</sup> are larger. Obtained by response surface optimization analysis, the optimum conditions for the preparation of Fe<sub>3</sub>O<sub>4</sub>-L were a particle size of 250 mesh, a total Fe concentration of 0.5 mol/L, and a molar ratio of Fe<sup>2+</sup> to Fe<sup>3+</sup> of 1:2. Under these conditions, the removal rates of Cu<sup>2+</sup>, Zn<sup>2+</sup>, and Pb<sup>2+</sup> were 94.52%, 88.49%, and 96.69% respectively. The adsorption of Cu<sup>2+</sup>, Zn<sup>2+</sup> and Pb<sup>2+</sup> by Fe<sub>3</sub>O<sub>4</sub>-L prepared under optimal conditions reached equilibrium at 180 min, with removal rates of 99.99%, 85.27%, and 97.48%, respectively. The adsorption reaction of Fe<sub>3</sub>O<sub>4</sub>-L for Cu<sup>2+</sup> and Zn<sup>2+</sup> is endothermic, while that for Pb<sup>2+</sup> is exothermic. Fe<sub>3</sub>O<sub>4</sub>-L can still maintain a high adsorption capacity after five cycles of adsorption-desorption experiments. Cu<sup>2+</sup>, Zn<sup>2+</sup> and Pb<sup>2+</sup> mainly exist as CuFe<sub>2</sub>O<sub>4</sub>, Zn(OH)<sub>2</sub>, ZnFe<sub>2</sub>O<sub>4</sub> and PbS after being adsorbed by Fe<sub>3</sub>O<sub>4</sub>-L, which is the result of the combination of physical diffusion, ion exchange and surface complexation reaction.},
DOI = {10.32604/jrm.2023.025241}
}



