@Article{jrm.2019.04291,
AUTHOR = {Silvia Helena Fuentes da  Silva, Patricia Soares Bilhalva dos  Santos, Darci Alberto  Gatto, Maria Angeles  Andres, Itziar  Egüés},
TITLE = {Liquefaction of Kraft Lignin at Atmospheric Pressure},
JOURNAL = {Journal of Renewable Materials},
VOLUME = {7},
YEAR = {2019},
NUMBER = {6},
PAGES = {527--534},
URL = {http://www.techscience.com/jrm/v7n6/30559},
ISSN = {2164-6341},
ABSTRACT = {Kraft lignin was liquefied using polyethylene glycol #400 (PEG) and glycerol (G) in a weight ratio of 80/20 (w/w) and sulphuric acid (SA) as catalyst under atmospheric pressure at 160ºC. The three independent variables: reaction time (60, 80 and 100 min), percentage of lignin (15, 20 and 25%, w/w), and catalyst concentration (0, 3 and 6%, w/w), were varied resulting in 27 experimental runs. The effect of these reaction conditions on the properties of the polyols was evaluated. The statistical analysis showed that only “the percentage of lignin” did not influence the properties of the liquefied products, however, reaction time and catalyst load were important parameters. The resulting liquefied products were characterized by FTIR analysis.},
DOI = {10.32604/jrm.2019.04291}
}