Xin Sun¹, Chi Zhang³, Yan Jia^1,2,*, Shikang Sui¹, Chong Zuo¹, Xueqiang Liu¹

Energy Engineering, Vol.120, No.3, pp. 729-742, 2023, DOI:10.32604/ee.2022.023398 - 03 January 2023

Abstract As a part of the new energy development trend, distributed power generation may fully utilize a variety of decentralized energy sources. Buildings close to the installation location, besides, may have a considerable impact on the wind turbines’ operation. Using a combined vertical axis wind turbine with an S-shaped lift outer blade and Φ-shaped drag inner blade, this paper investigates how a novel type of upstream wall interacts with the incident wind at various speeds, the influence region of the turbulent vortex, and performance variation. The results demonstrate that the building’s turbulence affects the wind’s horizontal More > Graphic Abstract

Hua Li^1,*, Dezhi Xiong^2,3, Zhi Wang^2,3

Energy Engineering, Vol.120, No.3, pp. 715-727, 2023, DOI:10.32604/ee.2022.022990 - 03 January 2023

Abstract The on-site inspection of high-power DC chargers results in new DC high-current measurement and DC energy traceability system requirements. This paper studies the traceability technology of electric energy value for automotive high-power DC chargers, including: (1) the traceability method of the built-in DC energy meter and shunt of the charger; (2) precision DC high current and small precision DC voltage output and measurement technology. This paper designs a 0.1 mA~600 A DC high current measurement system and proposes a 0.005 level DC power measurement traceability system. The uncertainty evaluation experiment of the DC power measurement More >

M. Soni^*, Abraham George

Energy Engineering, Vol.120, No.3, pp. 597-616, 2023, DOI:10.32604/ee.2023.021301 - 03 January 2023

Abstract The primary aim of the power system grounding is to safeguard the person and satisfying the performance of the power system to maintain reliable operation. With equal conductor spacing grounding grid design, the distribution of the current in the grid is not uniform. Hence, unequal grid conductor span in which grid conductors are concentrated more at the periphery is safer to practice than equal spacing. This paper presents the comparative analysis of two novel techniques that create unequal spacing among the grid conductors: the least-square curve fitting technique and the compression ratio technique with equal More >

Xun Zhang¹, Wanrong Bai¹, Haoyang Cui^2,*

Energy Engineering, Vol.120, No.3, pp. 665-679, 2023, DOI:10.32604/ee.2023.020342 - 03 January 2023

Abstract Optical Character Recognition (OCR) refers to a technology that uses image processing technology and character recognition algorithms to identify characters on an image. This paper is a deep study on the recognition effect of OCR based on Artificial Intelligence (AI) algorithms, in which the different AI algorithms for OCR analysis are classified and reviewed. Firstly, the mechanisms and characteristics of artificial neural network-based OCR are summarized. Secondly, this paper explores machine learning-based OCR, and draws the conclusion that the algorithms available for this form of OCR are still in their infancy, with low generalization and More >

Unique Karki^*, Bhaskaran Gopalakrishnan

Energy Engineering, Vol.120, No.2, pp. 345-365, 2023, DOI:10.32604/ee.2023.025600 - 29 November 2022

Abstract Industrial applications that require steam for their end-use generally utilize steam boilers that are typically oversized, citing operations flexibility. Similarly, gas turbine-based power plants corroborate a gas turbine system that may eventually relieve the usable exhaust into the atmosphere. This study explores the economic and technical feasibility of a topping cycle combined heat and power (CHP) system. It does so by leveraging a partially loaded boiler or gas turbine by increasing its unused load to generate steam and heat for subsequent usage. To this end, a decision support tool (COGENTEC) was developed, which emulates a… More > Graphic Abstract

Vivash Karki¹, Roseline Mostafa², Bhaskaran Gopalakrishnan^2,*, Derek R. Johnson³

Energy Engineering, Vol.120, No.2, pp. 561-586, 2023, DOI:10.32604/ee.2023.025218 - 29 November 2022

Abstract Building Energy Management Systems (BEMS) are computer-based systems that aid in managing, controlling, and monitoring the building technical services and energy consumption by equipment used in the building. The effectiveness of BEMS is dependent upon numerous factors, among which the operational characteristics of the building and the BEMS control parameters also play an essential role. This research develops a user-driven simulation tool where users can input the building parameters and BEMS controls to determine the effectiveness of their BEMS. The simulation tool gives the user the flexibility to understand the potential energy savings by employing… More > Graphic Abstract

Haibo Li^1,*, Yibao Wang¹, Xinfu Pang¹, Wei Liu¹, Xu Zhang²

Energy Engineering, Vol.120, No.2, pp. 317-343, 2023, DOI:10.32604/ee.2023.023715 - 29 November 2022

Abstract Electric-heat coupling characteristics of a cogeneration system and the operating mode of fixing electricity with heat are the main reasons for wind abandonment during the heating season in the Three North area. To improve the wind-power absorption capacity and operating economy of the system, the structure of the system is improved by adding a heat storage device and an electric boiler. First, aiming at the minimum operating cost of the system, the optimal scheduling model of the cogeneration system, including a heat storage device and electric boiler, is constructed. Second, according to the characteristics of… More >

Jiulong Sun¹, Yanbo Che^1,*, Ting Yang¹, Jian Zhang², Yibin Cai¹

Energy Engineering, Vol.120, No.2, pp. 367-384, 2023, DOI:10.32604/ee.2023.023661 - 29 November 2022

Abstract As the number of electric vehicles (EVs) continues to grow and the demand for charging infrastructure is also increasing, how to improve the charging infrastructure has become a bottleneck restricting the development of EVs. In other words, reasonably planning the location and capacity of charging stations is important for development of the EV industry and the safe and stable operation of the power system. Considering the construction and maintenance of the charging station, the distribution network loss of the charging station, and the economic loss on the user side of the EV, this paper takes… More > Graphic Abstract

Yukun Lv, Zeze Chen^*, Quanzhi Ge, Qian Wang, Yazhao Zhang

Energy Engineering, Vol.120, No.2, pp. 483-499, 2023, DOI:10.32604/ee.2023.023649 - 29 November 2022

Abstract To investigate the fouling characteristics of the composite insulator surface under the salt fog environment, the FXBW-110/120-2 composite insulator was taken as the research object. Based on the field-induced charge mechanism, the multi-physical field coupling software COMSOL was used to numerically simulate the fouling characteristics, explored the calculation method of ESDD, and demonstrated its rationality. Based on this method, the pollution characteristics of the composite insulator under the pollution fog environment were studied, and the influence of wind speed, droplet size, and voltage type on the pollution characteristics of the composite insulator was analyzed. The More > Graphic Abstract

Chuanjian Wu, Dahai Zhang^*, Jinghan He

Energy Engineering, Vol.120, No.2, pp. 299-316, 2023, DOI:10.32604/ee.2023.023532 - 29 November 2022

Abstract The DC grid technology of multi-power supply and multi-drop-point power reception is an effective solution for large-scale renewable energy integration into the power grid. Line-commutated converter-Voltage source converter (LCC-VSC) power grids are one of the more important developmental directions of the future power grid that have occured in recent years. But the multi-terminal high voltage direct current system has the problems of inconsistent boundary characteristics, inconsistent control, and fault response characteristics, which puts higher requirements on the protection scheme. Thus, a completely new protection principle is proposed in this paper. Firstly, the fault characteristics of… More >