Thang Duy Vu, Ruediger Schmidt¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.13, No.2, pp. 35-42, 2009, DOI:10.3970/icces.2009.013.035

Abstract Two geometrically nonlinear finite plate elements incorporating piezoelectric layers are presented, based either on first- or third-order shear deformation theory. Numerical tests are performed for the sensor output voltage of a piezolaminated plate. More >

Chih-Wei Hsieh¹, Chien-Li Wu¹, Cheng-Kuo Sung^1,2

The International Conference on Computational & Experimental Engineering and Sciences, Vol.13, No.2, pp. 33-34, 2009, DOI:10.3970/icces.2009.013.033

Abstract Molecular dynamics (MD) simulation has been demonstrated as a promising method to analyze formation and friction mechanisms of the nanoimprint process. Especially, it provides a useful tool for investigating critical issues that are generally difficult to be examined by the experiment because of cross talks among influential factors or attainability of direct measurement. This study utilized the friction mechanism to explore the factors that would affect the quality of mold replication in the direct nanoimprint. Those factors included mechanical properties of thin films, interaction force between mold and thin-film materials, and surface roughness of the… More >

Richard Degenhardt^{1, 2}

The International Conference on Computational & Experimental Engineering and Sciences, Vol.13, No.2, pp. 31-32, 2009, DOI:10.3970/icces.2009.013.031

Abstract This article has no abstract. More >

S.R.K Vedula¹, T.S. Lim², W. Hunziker³, C.T. Lim¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.13, No.1, pp. 29-30, 2009, DOI:10.3970/icces.2009.013.029

Abstract The structural integrity as well as the regulation of paracellular diffusion of solutes across epithelial monolayers is critically regulated by the intercellular adhesion complex. The intercellular adhesion complex consists of a variety of proteins that perform different physiological functions. While proteins localizing at adherens junctions (nectins and e-cadherins) are important for initiating and stabilizing cell adhesion, proteins localizing at the tight junctions (occludin, claudins and junctional adhesion molecules) act as gates to regulate the diffusion of solutes across the epithelial monolayer. Despite significant advancement in the understanding of the biological roles of these cell adhesion More >

A.A.Bayramov¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.13, No.1, pp. 23-28, 2009, DOI:10.3970/icces.2009.013.023

Abstract In this paper for simulation of the automated system of radiation monitoring of the environment the concept of constructing measurement tools using mathematical apparatus of Markov chains was offered. This concept is implemented as a software package for PC. Using the modeling program package, a virtual system of measuring complex devices gamma-radiation, converting the signal transmission and reception of signals was constructed. A software package for remote control of an automatized system of radiation monitoring "ECOMON" was compiled. The software package is implemented in the programming language Delphi v.5.0 for personal computer type IBM PENTIUM. More >

Darrell W. Pepper¹, Xiuling Wang²

The International Conference on Computational & Experimental Engineering and Sciences, Vol.13, No.1, pp. 15-22, 2009, DOI:10.3970/icces.2009.013.015

Abstract A meshless method for simulating indoor contaminant dispersion within buildings and rooms has been developed. The approach utilizes the advantages of the meshless method by distributing collocation points and different order radial basis functions according to the computational domain and evolving numerical solution. The numerical scheme yields fast convergence and high accuracy necessary for providing quick assessments of contamination transport within enclosures. More >

AnteBilić¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.13, No.1, pp. 13-14, 2009, DOI:10.3970/icces.2009.013.013

Abstract Using several popular first-principles packages for materials modeling the nature of the cubic lattice of barium zirconate has been investigated. The evaluated vibrational spectra typically exhibit an extended and prominent dynamical instability. The instability manifests through imaginary frequency optical modes along the whole R-M edge of the Brillouin zone. The experimentally observed simple cubic structure is found to be dynamically unstable against an antiferro-distortive transformation. The computations predict an orthorhombic crystal structure of the material, only slightly distorted from the cubic lattice, with an eight times larger unit cell and alternate ZrO₆ octahedra slightly rotated in More >

N. J. Lee, C.R. Welch¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.13, No.1, pp. 11-12, 2009, DOI:10.3970/icces.2009.013.011

Abstract Carbon nanotubes have significant potential as the basis for super infrastructure material. The shear modulus of carbon nanotube ensembles is relatively low, comparable to graphite, as the carbon nanotubes interact via weak van der Waals forces. Unmodified, their intermolecular interactions are insufficient to take full advantage of the extraordinarily high strengths predicted for carbon nanotube-based fibers. Thus, a key to their use in high-strength materials is developing strong bonds between these molecules. In this study, we examine the potential development of covalent bonds between carbon nanotube pairs cross-bonded by proton bombardment using molecular dynamics simulation. More >

Sutthinane Nilbuaklee¹, Chanyut Kolitawong¹, Banpot Horbanluekit^1,2

The International Conference on Computational & Experimental Engineering and Sciences, Vol.13, No.1, pp. 4-10, 2009, DOI:10.3970/icces.2009.013.004

Abstract The purpose of this research is to determine fracture effects of vulcanize elastomer at various thickness to width ratios under opening mode fracture mechanics. The J-integral values from finite element method are compared with those from experiment. In this research, fracture tests perform under Single Edge Notch Tensile (S.E.N.T) tests using the multiple-specimen method. Compare to the experimental data, the numerical results are acceptable at the deep crack length, i.e. high crack length to width ratio. The k values from the 3-D numerical calculation show that thin sheet is dominated by plane stress state, but thick sheet More >

Soojin Cho¹, Jin-Hak Yi², Chung-Bang Yun¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.12, No.4, pp. 151-152, 2009, DOI:10.3970/icces.2009.012.151

Abstract The bridges are exposed to severe operational and environmental loadings, such as traffic, wind, and earthquake during their life time. Continuous exposure to such severe loadings may lead to structural damage requiring costly repair/retrofit and even may result in an unexpected disaster, which emphasizes the importance of assessing the current condition of bridges. From the last decade, FE model updating techniques based on the bridge dynamic characteristics are emerged to evaluate the current condition of bridges quantitatively. Most of the model updating techniques basically utilize an optimization process with an objective function built up by… More >