Jinling Long^1,2, Bingang Xu^1,3, Xiaoming Tao¹

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.4, pp. 273-298, 2011, DOI:10.3970/cmes.2011.072.273

Abstract Moving slender threadline structures are widely used in various engineering fields. The dynamics of these systems is sometimes time dependent but in most cases follows a periodic pattern, and slender yarn motion in textile engineering is a typical problem of this category. In the present paper, we propose a nonlinear approach to model the dynamic behavior of slender threadline structures with a real example in the analysis of slender yarn motion in spinning. Moving boundary conditions of yarn are derived and a consequence of the perturbation analysis for the dimensionless governing equations provides the zero More >

Htike Htike¹, Wen Chen¹, Yan Gu¹, Junjie Yang¹

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.4, pp. 247-272, 2011, DOI:10.3970/cmes.2011.072.247

Abstract This paper makes the first attempt to employ the Radial Basis Function (RBF) interpolation in the material point method (MPM), in which the shape function is based on RBF and polynomial function and satisfies the partition of unity and possesses Delta-function property. It is worthy of stressing that the RBF interpolation has the merit of high smoothness and is very accurate and can easily be applied to the MPM framework for mapping information between moving particles, known as material point in the MPM, and background grids. The RBF-based MPM is designed to overcome the unphysical More >

Veturia Chiroiu¹, Ligia Munteanu², Ioan Ursu³

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.3, pp. 229-246, 2011, DOI:10.3970/cmes.2011.072.229

Abstract Chaotic behavior of uncertain nonlinear systems offers a rich variety of orbits, which can be controlled by bounding the signals involved in closed-loop systems. In this paper, systems with nonlinear uncertainties with no prior knowledge of their bounds, unmodeled dynamic law and rapidly varying disturbances are analyzed in order to propose a stabilization controller of the chaotic behavior via the fuzzy logic systems. More >

Che-Wun Hong^1,2, Wei-Hui Chen¹

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.3, pp. 211-228, 2011, DOI:10.3970/cmes.2011.072.211

Abstract This paper intends to use semiconductor quantum dots (cadmium sulphide- CdS) and/or biological pigments (chlorophyll-a derivatives) to replace those expensive ruthenium (Ru) dyes in photoelectrochemical solar cells. Based on the computational quantum chemistry, the molecular structures of (CdS)_n (n=1 ~ 22) clusters and chlorophyll-a derivatives (chlorin-H₃⁺ and chlorin-H₁₇⁺) are configured and optimized. Density functional theory (DFT) of the first principles calculations, which chose B3LYP (Becke 3-parameter Lee-Yang-Parr) and PBE (Perdew-Burke- Ernzerhof) exchange correlation functionals, is employed. Photoelectric properties, such as: molecular orbital, density of state (DOS), highest occupied molecular orbital (HOMO), lowest unoccupied molecular orbital (LUMO) and More >

D. Mirzaei¹, M. Dehghan¹

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.3, pp. 185-210, 2011, DOI:10.3970/cmes.2011.072.185

Abstract The meshless local Petrov-Galerkin (MLPG) method with an efficient technique to deal with the time variable are used to solve the heat conduction problem in this paper. The MLPG is a meshless method which is (mostly) based on the moving least squares (MLS) scheme to approximate the trial space. In this paper the MLS is used for approximation in both time and space domains, and we avoid using the time difference discretization or Laplace transform method to overcome the time variable. The technique is applied for continuously nonhomogeneous functionally graded materials (FGM) in a finite More >

F. Guarracino ¹

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.3, pp. 167-184, 2011, DOI:10.3970/cmes.2011.072.167

Abstract The design of many engineering problems requires accurate test results and interpretation in order to evaluate the carrying capacity of circular cylindrical shells subjected to various loads including bending. Apparently anomalous values of axial tensile and compressive strains from recent test results have been lately investigated and explained using Finite Element modeling. As a complement to numerical analyses, in the present paper a simple analytical formula for the estimation of the effects of local conditions in tubes testing and design is provided on the basis of an extended Ritz's approach and of the general linear More >

Duning Li¹, Yufeng Nie^1,2, Xuemei Zhou¹, Li Cai¹

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.2, pp. 149-166, 2011, DOI:10.3970/cmes.2011.072.149

Abstract In this study, the efficient discrete model including the resin infusion and the fiber compaction is developed to simulate the RFI (resin film infusion) process. The non-linear governing equations are derived by the Darcy's law, the Terzaghi's law and the continuity equations. The finite element method and the finite difference method are used to discretize the proposed equations, and the VOF method is used to track the filling front. Compared with the analytical results of Park, our numerical results agree well with them. Furthermore, we analyze the RFI process of BMI/G0814, and simulate the resin More >

H. T. Wang^1,2, Z. H. Yao³

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.2, pp. 115-148, 2011, DOI:10.3970/cmes.2011.072.115

Abstract A fast boundary element solver for the analysis of three-dimensional general crack problems is presented. In order to effectively model the embedded or edge cracked structures a dual boundary integral equation (BIE) formulation is used. By implementing the fast multipole method (FMM) to the discretized BIE, structures containing a large number of three-dimensional cracks can be readily simulated on one personal computer. In the FMM framework, a multipole expansion formulation is derived for the hyper-singular integral in order that the multipole moments of the dual BIEs containing the weakly-, strongly- and hyper-singular kernels are collected More >

Quan Zheng², Jing Wang², Jing-ya Li²

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.2, pp. 103-114, 2011, DOI:10.3970/cmes.2011.072.103

Abstract This paper investigates the coupling method of the finite element and the natural boundary element using an elliptic artificial boundary for solving exterior anisotropic problems, and obtains a new error estimate that depends on the mesh size, the location of the elliptic artificial boundary, the number of terms after truncating from the infinite series in the integral. Numerical examples are presented to demonstrate the effectiveness and the properties of this method. More >

N. Liu,¹,W. Gao ¹, C.M. Song¹, N. Zhang²

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.2, pp. 79-102, 2011, DOI:10.3970/cmes.2011.072.079

Abstract This paper presents the probabilistic dynamic analysis of vehicle-bridge interaction systems. The bridge's and vehicle's parameters are considered as random variables as well as the road surface roughness is modeled as random process. A two-degree-of-freedom spring-mass system is used to represent a moving vehicle and the bridge is modeled as an Euler-Bernoulli beam. From the equation of motion for the vehicle-bridge coupling system, the expressions for mean value and standard deviation of bridge response are developed by using the random variable's functional moment method. The effects of the individual system parameters and the road surface More >