H.F.Qiang¹, F.Z.Chen¹, W.R. Gao¹

CMES-Computer Modeling in Engineering & Sciences, Vol.77, No.3&4, pp. 239-262, 2011, DOI:10.3970/cmes.2011.077.239

Abstract Based on smoothed particle hydrodynamics (SPH) method with surface tension proposed by Morris, this paper is intended to modify equations for surface tension by modifying normal and curvature with corrective smoothing particle method (CSPM). Compared with the continuum surface force (CSF) model for surface tension employed in the traditional SPH method, the accuracy in the present paper is much higher in terms of handling the problems with large deformation and surface tension. The reason is that in the traditional SPH method the deficiency of particles is near the boundary and sharp-angled areas, and it causes… More >

Hsin-Ping Chu¹, Cheng-Ying Lo²

CMES-Computer Modeling in Engineering & Sciences, Vol.77, No.3&4, pp. 161-172, 2011, DOI:10.3970/cmes.2011.077.161

Abstract This paper presents the application of the differential transform method to solve strongly nonlinear equations with cubic nonlinearities and self-excitation terms. First, the equations are transformed by the differential transform method into the algebra equations in terms of the transformed functions. Secondly, the higher-order transformed functions are calculated in terms of other lower-order transformed functions through the iterative procedure. Finally, the solutions are approximated by the n-th partial sum of the infinite series obtained by the inverse differential transform. Two strongly nonlinear equations with different coefficients and initial conditions are given as illustrative examples. More >

A. Rezaei Mojdehi^1,2, A. Darvizeh³, A. Basti²

CMES-Computer Modeling in Engineering & Sciences, Vol.77, No.1, pp. 1-32, 2011, DOI:10.3970/cmes.2011.077.001

Abstract In this paper, a meshless method based on the local petrov-galerkin approach is proposed for the three dimensional (3D) elasto-plastic problems. Galerkin weak-form formulation is applied to derive the discrete governing equations. A weak formulation for the set of governing equations is transformed into local integral equations on local sub-domains by using a unit test function. Nodal points are distributed in the 3D analyzed domain and each node is surrounded by a cubic sub-domain to which a local integral equation is applied. Three dimensional Moving Least-Square (MLS) approximation is used as shape function to approximate More >

Xiaowei Zeng¹

CMES-Computer Modeling in Engineering & Sciences, Vol.74, No.3&4, pp. 183-202, 2011, DOI:10.3970/cmes.2011.074.183

Abstract This paper presents an atomistic field theory and its application in modeling and simulation of nano/micro materials. Atomistic formulation and finite element implementation of the atomistic field theory is briefly introduced. Numerical simulations based on the field theory are performed to investigate the material behaviors of bcc iron at coarse-grained scale and we have obtained the mechanical strength and elastic modulus, which are in good agreement with results by first principles calculations. Also the nanoscale deformation and failure mechanism are revealed in bcc iron nanorods under simple tension. It is interesting to observe that under More >

A. Gakwaya¹, H. Sharifi², M. Guillot¹, M. Souli³, F. Erchiqui⁴

CMES-Computer Modeling in Engineering & Sciences, Vol.73, No.3, pp. 209-266, 2011, DOI:10.3970/cmes.2011.073.209

Abstract A mechanical computer aided design and engineering system can be used to reduce the design-to-manufacture cycle time in metal forming process. Such a system could be built upon a solid modeling geometry engine and an efficient finite element (FE) solver. The maintenance of a high-quality mesh throughout the analysis is an essential feature of an efficient finite element simulation of large strain metal forming problems. In this paper, a mesh adaptation technique employing the Arbitrary Lagrangian-Eulerian formulation (ALE) is applied to some industrial metal forming problems. An ACIS boundary representation of the solid model is… More >

K. Jayabal¹, A. Menzel^1,2

CMES-Computer Modeling in Engineering & Sciences, Vol.73, No.2, pp. 183-208, 2011, DOI:10.3970/cmes.2011.073.183

Abstract Naturally evolving Voronoi discretisation of two-dimensional plane domains renders representative microstructures that turn out to be useful for the modelling and simulation of polycrystalline materials. Hybrid finite element approaches are employed on such polygonal discretisations to solve, for instance, mechanical and electromechanical problems within a finite element context. In view of solving mechanical problems, varying order of polynomial functions are suggested in the literature to sufficiently approximate stresses within the polygonal finite elements. These are, in addition to the order of the approximation functions for the displacements, characterised by the number of edges in the… More >

K. Wang¹, S.J. Zhou^2,3, Z.F. Nie⁴

CMES-Computer Modeling in Engineering & Sciences, Vol.73, No.1, pp. 77-102, 2011, DOI:10.3970/cmes.2011.073.077

Abstract The natural neighbour Galerkin method is tailored to solve boundary value problems of the couple-stress elasticity to model the size dependent behaviour of materials. This method is based on the displacement-based Galerkin approach, and the calculation of the global stiffness matrix is performed using gradient smoothing technique combined with the non-Sibsonian partition of unity approximation scheme. This method possesses the following properties: the complex C1-continuous approximation scheme is avoided without using either Lagrange multipliers or penalty parameters; no domain integrals involved in the assembly of the global stiffness matrix; and the imposition of essential boundary More >

Duning Li¹, Yufeng Nie^1,2, Xuemei Zhou¹, Li Cai¹

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.2, pp. 149-166, 2011, DOI:10.3970/cmes.2011.072.149

Abstract In this study, the efficient discrete model including the resin infusion and the fiber compaction is developed to simulate the RFI (resin film infusion) process. The non-linear governing equations are derived by the Darcy's law, the Terzaghi's law and the continuity equations. The finite element method and the finite difference method are used to discretize the proposed equations, and the VOF method is used to track the filling front. Compared with the analytical results of Park, our numerical results agree well with them. Furthermore, we analyze the RFI process of BMI/G0814, and simulate the resin More >

Robert Rundqvist¹, Andreas Mark¹, Fredrik Edelvik¹, Johan S. Carlsson¹

FDMP-Fluid Dynamics & Materials Processing, Vol.7, No.3, pp. 259-278, 2011, DOI:10.3970/fdmp.2011.007.259

Abstract Multiphase flow simulation using Smoothed Particle Hydrodynamics (SPH) has gained interest during recent years, mostly due to the inherent flexibility of the method and the physically rather intuitive formulation of extra constitutive equations needed when dealing with for instance non-Newtonian flows. In the work presented here, simulations based on an SPH model implemented in the flow solver IBOFlow has been used for simulation of robotic application of sealing material on a car body. Application of sealing materials is done in order to prevent water leakage into cavities of the body, and to reduce noise. In… More >

C. T. Wu¹, F.-L. Yang², D. L. Young³

CMC-Computers, Materials & Continua, Vol.23, No.2, pp. 135-154, 2011, DOI:10.3970/cmc.2011.023.135

Abstract This paper proposes a method that can calculate the hydrodynamic force of a non-circular object in an inviscid, irrotational, and incompressible flow with the presence of external flow singularities. In order to handle irregular object, the method of fundamental solutions (MFS) is employed to numerically construct the singularity system that describes the body and the flow motion and meets the boundary condition. The obtained singularity system is then integrated into the generalized Lagally theorem to compute the instantaneous hydrodynamic force via algebraic calculations and to describe the unsteady interaction of the object and its ambient… More >