C. J. Reddy¹

CMES-Computer Modeling in Engineering & Sciences, Vol.5, No.5, pp. 455-462, 2004, DOI:10.3970/cmes.2004.005.455

Abstract This paper presents an efficient algorithm to evaluate multi-spectral and multi-angular monostatic radar cross section (RCS) of large objects with very fine increments. The technique is based on the combination of Model Based Parameter Estimation (MBPE) method with hybrid frequency domain formulations. A general approach to formulation of MBPE is presented along with a similar approach called the Asymptotic Waveform Evaluation (AWE). Various numerical examples are presented for multi-spectral response calculations using method of moments (MoM) and the hybrid Finite Element-MoM technique in conjunction with MBPE. Example application of MBPE for hybrid MoM-Physical Optics approach More >

Raju R. Namburu¹, Eric R. Mark, Jerry A. Clarke

CMES-Computer Modeling in Engineering & Sciences, Vol.5, No.5, pp. 443-454, 2004, DOI:10.3970/cmes.2004.005.443

Abstract Computational electromagnetic (CEM) simulations of full-range military vehicles play a critical role in enhancing the survivability and target recognition of combat systems. Modeling of full-range military systems subjected to high frequencies may involve generating large-scale meshes, solving equations, visualization, and analysis of results in the range of billions of unknowns or grid points. Hence, the overall objective of this research is to develop and demonstrate a scalable CEM software environment to address accurate prediction of radar cross sections (RCS) for full- range armored vehicles with realistic material treatments and complex geometric configurations. A software environment… More >

V.K. Tewary², D.T. Read²

CMES-Computer Modeling in Engineering & Sciences, Vol.6, No.4, pp. 359-372, 2004, DOI:10.3970/cmes.2004.006.359

Abstract An integrated Green's function and molecular dynamics technique is developed for multiscale modeling of a nanostructure in a semi-infinite crystal lattice. The equilibrium configuration of the atoms inside and around the nanostructure is calculated by using molecular dynamics that accounts for nonlinear interatomic forces. The molecular dynamics is coupled with the lattice statics Green's function for a large crystallite containing a million or more atoms. This gives a fully atomistic description of a nanostructure in a large crystallite that includes the effect of nonlinear forces. The lattice statics Green's function is then related to the… More >

F. Auricchio¹, L. Petrini², R. Pietrabissa³, E. Sacco⁴

CMES-Computer Modeling in Engineering & Sciences, Vol.4, No.3&4, pp. 365-380, 2003, DOI:10.3970/cmes.2003.004.365

Abstract Since 80’s many devices were developed to exploit the unique blend of mechanical and biocompatibility properties of shape memory alloys in orthodontic applications. It results in a high clinical effectiveness, but also in a spreading of technical knowledge on the properties of the single appliances. The goal of the present contribution is to contrast this sense of bewilderness and to prepare the basis for a simulationtool able to support the orthodontist choice. In particular a finite-element beam with a one-dimensional constitutive law, able to describe the SMA super elasticity and shape memory effect, is presented: More >

A.R.Skovoroda¹, R.V.Goldstein²

CMES-Computer Modeling in Engineering & Sciences, Vol.4, No.3&4, pp. 457-472, 2003, DOI:10.3970/cmes.2003.004.457

Abstract We discuss the inverse problem of the recovery of the distribution of the elastic moduli of a stratified layer, based on measurements of the surface displacement under localized surface loads. A general parametric solution and a numerical procedure for computing the parameters are presented. Examples of numerical results are given. The problem and its solution are related to the monitoring of elastic properties of living tissues. More >

I. J. Rao¹, J.D. Humphrey², K.R. Rajagopal³

CMES-Computer Modeling in Engineering & Sciences, Vol.4, No.3&4, pp. 439-456, 2003, DOI:10.3970/cmes.2003.004.439

Abstract Recent discoveries in molecular and cell biology reveal that many cell types sense and respond (via altered gene expression) to changes in their mechanical environment. Such mechanotransduction mechanisms are responsible for many changes in structure and function, including the growth and remodeling process. To understand better, and ultimately to use (e.g., in tissue engineering), biological growth and remodeling, there is a need for mathematical models that have predictive and not just descriptive capability. In contrast to prior models based on reaction-diffusion equations or the concept of volumetric growth, we examine here a newly proposed constrained More >

K.J. Fischer^1,2, J.A. Bastidas³, H.J. Pfaeffle², J.D. Towers²

CMES-Computer Modeling in Engineering & Sciences, Vol.4, No.3&4, pp. 397-404, 2003, DOI:10.3970/cmes.2003.004.397

Abstract The two bones of the forearm, the radius and the ulna, have been shown to bear different proportions of the overall forearm load at the wrist and the elbow. This biomechanical data suggests load transfer between the bones occurs through the soft tissues of the forearm. Load transfer from radius to ulna through passive soft tissues such as the interosseous ligament (IOL) has been experimentally measured. Ex vivo studies of the forearm, however, cannot account for the effect of internal loads generated by the muscles and, in some cases, external forces acting directly on the… More >

Jan Sladek¹, Vladimir Sladek¹, Chuanzeng Zhang²

CMES-Computer Modeling in Engineering & Sciences, Vol.4, No.6, pp. 637-648, 2003, DOI:10.3970/cmes.2003.004.637

Abstract A new computational method for solving transient elastodynamic initial-boundary value problems in continuously non-homogeneous solids, based on the meshless local Petrov-Galerkin (MLPG) method, is proposed in the present paper. The moving least squares (MLS) is used for interpolation and the modified fundamental solution as the test function. The local Petrov-Galerkin method for unsymmetric weak form in such a way is transformed to the local boundary integral equations (LBIE). The analyzed domain is divided into small subdomains, in which a weak solution is assumed to exist. Nodal points are randomly spread in the analyzed domain and More >

Q. Li¹, S. Shen¹, Z. D. Han¹, S. N. Atluri¹

CMES-Computer Modeling in Engineering & Sciences, Vol.4, No.5, pp. 571-586, 2003, DOI:10.3970/cmes.2003.004.571

Abstract In this paper, a truly meshless method, the Meshless Local Petrov-Galerkin (MLPG) Method, is developed for three-dimensional elasto-statics. The two simplest members of MLPG family of methods, the MLPG type 5 and MLPG type 2, are combined, in order to reduce the computational requirements and to obtain high efficiency. The MLPG5 method is applied at the nodes inside the 3-D domain, so that any domain integration is eliminated altogether, if no body forces are involved. The MLPG 2 method is applied at the nodes that are on the boundaries, and on the interfaces of material More >

A. Aimi¹, M. Diligenti¹, F. Lunardini¹, A. Salvadori²

CMES-Computer Modeling in Engineering & Sciences, Vol.4, No.1, pp. 31-50, 2003, DOI:10.3970/cmes.2003.004.031

Abstract This paper is devoted to the study of a new application of the Panel Clustering Method [Hackbusch and Sauter (1993); Hackbusch and Nowak (1989)]. By considering a classical 3D Neumann screen problem in its boundary integral formulation discretized with the Galerkin BEM, which requires the evaluation of double integrals with hypersingular kernel, we recall and use some recent results of analytical evaluation of the inner hypersingular integrals. Then we apply the Panel Clustering Method (PCM) for the evaluation of the outer integral. For this approach error estimate is shown. Numerical examples and comparisons with classical More >