Y. Gan¹, Z. Chen^2,3, S. Montgomery-Smith⁴

CMES-Computer Modeling in Engineering & Sciences, Vol.73, No.1, pp. 45-76, 2011, DOI:10.3970/cmes.2011.073.045

Abstract The material point method (MPM), which is an extension from computational fluid dynamics (CFD) to computational solid dynamics (CSD), is improved for the coupled CFD and CSD simulation of the zona failure response in piezo-assisted intracytoplasmic sperm injection (piezo-ICSI). To evaluate the stresses at any zona material point, a plane stress assumption is made in the local tangent plane of the membrane point, and a simple procedure is proposed to find the effective point connectivity for the orientation of the local tangent plane. With an iterative algorithm in each time step, the original MPM is More >

D.M.S. Albuquerque¹, J.M.C. Pereira¹, J.C.F. Pereira^1,2

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.4, pp. 337-366, 2011, DOI:10.3970/cmes.2011.072.337

Abstract A numerical study of fluid-structure interaction is presented for the analysis of viscous flow over a resonant membrane airfoil in hovering flight. A flexible membrane moving with a prescribed stroke period was naturally excited to enter into 1st, 2nd and 3rd mode of vibration according to the selected membrane tension. The Navier-Stokes equations were discretized on a moving body unstructured grid using the finite volume method. The instantaneous membrane position was predicted by the 1D unsteady membrane equation with input from the acting fluid flow forces. Following initial validation against reported rigid airfoils predictions, the… More >

D.-A. An-Vo¹, N. Mai-Duy¹, T. Tran-Cong¹

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.4, pp. 299-336, 2011, DOI:10.3970/cmes.2011.072.299

Abstract This paper presents a new control-volume discretisation method, based on Cartesian grids and integrated-radial-basis-function elements (IRBFEs), for the solution of second-order elliptic problems in one and two dimensions. The governing equation is discretised by means of the control-volume formulation and the division of the problem domain into non-overlapping control volumes is based on a Cartesian grid. Salient features of the present method include (i) an element is defined by two adjacent nodes on a grid line, (ii) the IRBF approximations on each element are constructed using only two RBF centres (a smallest RBF set) associated… More >

Jinling Long^1,2, Bingang Xu^1,3, Xiaoming Tao¹

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.4, pp. 273-298, 2011, DOI:10.3970/cmes.2011.072.273

Abstract Moving slender threadline structures are widely used in various engineering fields. The dynamics of these systems is sometimes time dependent but in most cases follows a periodic pattern, and slender yarn motion in textile engineering is a typical problem of this category. In the present paper, we propose a nonlinear approach to model the dynamic behavior of slender threadline structures with a real example in the analysis of slender yarn motion in spinning. Moving boundary conditions of yarn are derived and a consequence of the perturbation analysis for the dimensionless governing equations provides the zero More >

Htike Htike¹, Wen Chen¹, Yan Gu¹, Junjie Yang¹

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.4, pp. 247-272, 2011, DOI:10.3970/cmes.2011.072.247

Abstract This paper makes the first attempt to employ the Radial Basis Function (RBF) interpolation in the material point method (MPM), in which the shape function is based on RBF and polynomial function and satisfies the partition of unity and possesses Delta-function property. It is worthy of stressing that the RBF interpolation has the merit of high smoothness and is very accurate and can easily be applied to the MPM framework for mapping information between moving particles, known as material point in the MPM, and background grids. The RBF-based MPM is designed to overcome the unphysical More >

Veturia Chiroiu¹, Ligia Munteanu², Ioan Ursu³

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.3, pp. 229-246, 2011, DOI:10.3970/cmes.2011.072.229

Abstract Chaotic behavior of uncertain nonlinear systems offers a rich variety of orbits, which can be controlled by bounding the signals involved in closed-loop systems. In this paper, systems with nonlinear uncertainties with no prior knowledge of their bounds, unmodeled dynamic law and rapidly varying disturbances are analyzed in order to propose a stabilization controller of the chaotic behavior via the fuzzy logic systems. More >

Che-Wun Hong^1,2, Wei-Hui Chen¹

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.3, pp. 211-228, 2011, DOI:10.3970/cmes.2011.072.211

Abstract This paper intends to use semiconductor quantum dots (cadmium sulphide- CdS) and/or biological pigments (chlorophyll-a derivatives) to replace those expensive ruthenium (Ru) dyes in photoelectrochemical solar cells. Based on the computational quantum chemistry, the molecular structures of (CdS)_n (n=1 ~ 22) clusters and chlorophyll-a derivatives (chlorin-H₃⁺ and chlorin-H₁₇⁺) are configured and optimized. Density functional theory (DFT) of the first principles calculations, which chose B3LYP (Becke 3-parameter Lee-Yang-Parr) and PBE (Perdew-Burke- Ernzerhof) exchange correlation functionals, is employed. Photoelectric properties, such as: molecular orbital, density of state (DOS), highest occupied molecular orbital (HOMO), lowest unoccupied molecular orbital (LUMO) and More >

D. Mirzaei¹, M. Dehghan¹

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.3, pp. 185-210, 2011, DOI:10.3970/cmes.2011.072.185

Abstract The meshless local Petrov-Galerkin (MLPG) method with an efficient technique to deal with the time variable are used to solve the heat conduction problem in this paper. The MLPG is a meshless method which is (mostly) based on the moving least squares (MLS) scheme to approximate the trial space. In this paper the MLS is used for approximation in both time and space domains, and we avoid using the time difference discretization or Laplace transform method to overcome the time variable. The technique is applied for continuously nonhomogeneous functionally graded materials (FGM) in a finite More >

Duning Li¹, Yufeng Nie^1,2, Xuemei Zhou¹, Li Cai¹

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.2, pp. 149-166, 2011, DOI:10.3970/cmes.2011.072.149

Abstract In this study, the efficient discrete model including the resin infusion and the fiber compaction is developed to simulate the RFI (resin film infusion) process. The non-linear governing equations are derived by the Darcy's law, the Terzaghi's law and the continuity equations. The finite element method and the finite difference method are used to discretize the proposed equations, and the VOF method is used to track the filling front. Compared with the analytical results of Park, our numerical results agree well with them. Furthermore, we analyze the RFI process of BMI/G0814, and simulate the resin More >

H. T. Wang^1,2, Z. H. Yao³

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.2, pp. 115-148, 2011, DOI:10.3970/cmes.2011.072.115

Abstract A fast boundary element solver for the analysis of three-dimensional general crack problems is presented. In order to effectively model the embedded or edge cracked structures a dual boundary integral equation (BIE) formulation is used. By implementing the fast multipole method (FMM) to the discretized BIE, structures containing a large number of three-dimensional cracks can be readily simulated on one personal computer. In the FMM framework, a multipole expansion formulation is derived for the hyper-singular integral in order that the multipole moments of the dual BIEs containing the weakly-, strongly- and hyper-singular kernels are collected More >