Yan Shi¹, Wenjie Li¹, Gongbo Fan^2,*, Luxi Zhang¹, Fengjiu Yang¹

Energy Engineering, Vol.121, No.2, pp. 461-482, 2024, DOI:10.32604/ee.2023.043835

Abstract Addressing the insufficiency in down-regulation leeway within integrated energy systems stemming from the erratic and volatile nature of wind and solar renewable energy generation, this study focuses on formulating a coordinated strategy involving the carbon capture unit of the integrated energy system and the resources on the load storage side. A scheduling model is devised that takes into account the confidence interval associated with renewable energy generation, with the overarching goal of optimizing the system for low-carbon operation. To begin with, an in-depth analysis is conducted on the temporal energy-shifting attributes and the low-carbon modulation mechanisms exhibited by the source-side… More >

Kaiyue Hong^1,2, Yasmina Radani², Waqas Ahmad², Ping Li³, Yuming Luo^1,*

Phyton-International Journal of Experimental Botany, Vol.93, No.1, pp. 45-61, 2024, DOI:10.32604/phyton.2023.046389

Abstract Carbon monoxide (CO) and nitric oxide (NO) are signal molecules that enhance plant adaptation to environmental stimuli. Auxin is an essential phytohormone for plant growth and development. CO and NO play crucial roles in modulating the plant’s response to iron deficiency. Iron deficiency leads to an increase in the activity of heme oxygenase (HO) and the subsequent generation of CO. Additionally, it alters the polar subcellular distribution of Pin-Formed 1 (PIN1) proteins, resulting in enhanced auxin transport. This alteration, in turn, leads to an increase in NO accumulation. Furthermore, iron deficiency enhances the activity of ferric chelate reductase (FCR), as… More >

Yong Qin^1,2, Xiaoyu Li^1,2, Yanhong Wu^1,2, Hai Wang³, Guiqi Han^1,2,3, Zhuyun Yan^1,2,*

Phyton-International Journal of Experimental Botany, Vol.93, No.1, pp. 119-135, 2024, DOI:10.32604/phyton.2023.046075

Abstract Root exudates serve as crucial mediators for information exchange between plants and soil, and are an important evolutionary mechanism for plants’ adaptation to environmental changes. In this study, 15 different abiotic stress models were established using various stress factors, including drought (D), high temperature (T), nitrogen deficiency (N), phosphorus deficiency (P), and their combinations. We investigated their effects on the seedling growth of Salvia miltiorrhiza Bunge and the activities of Solid-Urease (S-UE), Solid-Nitrite Reductase (S-NiR), Solid-Nitrate Reductase (S-NR), Solid-Phosphotransferase (S-PT), and Solid-Catalase (S-CAT), as well as the contents of polysaccharides in the culture medium. The results showed that the growth… More >

Omojola Awogbemi^*, Ayotunde Adigun Ojo, Samson Adedayo Adeleye

Journal of Renewable Materials, Vol.12, No.1, pp. 1-28, 2024, DOI:10.32604/jrm.2023.045822

Abstract The huge volumes of crop residues generated during the production, processing, and consumption of farm products constitute an ecological nuisance when ineffectively managed. The conversion of crop residues to green hydrogen is one of the sustainable management strategies for ubiquitous crop residues. Production of green hydrogen from crop residue sources will contribute to deepening access to clean and affordable energy, mitigating climate change, and ensuring environmental sustainability. However, the deployment of conventional thermochemical technologies for the conversion of crop residues to green hydrogen is costly, requires long residence time, produces low-quality products, and therefore needs to be upgraded. The current… More >

Jie Huang^*, Rongbin Jiang, Xiaobo Sun, Yingyong Shuai

Journal of Renewable Materials, Vol.12, No.1, pp. 187-201, 2024, DOI:10.32604/jrm.2023.044232

Abstract The reuse of waste recycled concrete from harsh environments has become a research hotspot in the field of construction. This study investigated the repair effect of carbonation treatment on second-generation recycled fine aggregate (SRFA) obtained from recycled fine aggregate concrete (RFAC) subjected to freeze-thaw (FT) cycles. Before and after carbonation, the properties of SRFA were evaluated. Carbonated second-generation recycled fine aggregate (CSRFA) at five substitution rates (0%, 25%, 50%, 75%, 100%) to replace SRFA was used to prepare carbonated second-generation recycled fine aggregate concrete (CSRFAC). The water absorption, porosity and mechanical properties of CSRFAC were tested, and its frost-resisting durability… More >

Jinshuo Wang, Lida Xing, Fulong Zhang, Chuanfu Liu^*

Journal of Renewable Materials, Vol.12, No.1, pp. 89-102, 2024, DOI:10.32604/jrm.2023.029057

Abstract Wood-based functional materials have developed rapidly. But the flammability significantly limits its further application. To improve the flame retardancy, the balsa wood was delignified by NaClO₂ solution to create a cellulose scaffold, and then alternately immersed in CaCl₂ ethanol solution and NaHCO₃ aqueous solution under vacuum. The high porosity and wettability resulting from delignification benefited the following mineralization process, changing the thermal properties of balsa wood significantly. The organic-inorganic wood composite showed abundant CaCO₃ spherical particles under scanning electron microscopy. The peak of the heat release rate of delignified balsa-CaCO₃ was reduced by 33% compared to the native balsa, according… More > Graphic Abstract

Budhi Priyanto^1,2,*, Imam Khambali^1,2, Irma Septi Ardiani², Khoirotun Nadhiyah², Anna Zakiyatul Laila², M. Chasrun Hasani¹, Bima Romadhon³, Retno Asih², Yoyok Cahyono², Triwikantoro², Darminto^2,*

Journal of Renewable Materials, Vol.12, No.1, pp. 57-69, 2024, DOI:10.32604/jrm.2023.028619

Abstract An a-C/a-C:N junction, which used palmyra sugar as the carbon source and ammonium hydroxide (NH₄OH) as the dopant source, was successfully deposited on the ITO glass substrate using the nano-spraying method. The current-voltage relationship of the junction was found to be a Schottky-like contact, and therefore the junction shows the characteristic rectifiers. This means the a-C and a-C:N are semiconductors with different types of conduction. Moreover, the samples showed an increase in current and voltage value when exposed to visible light (bright state) compared to the dark condition, thereby, indicating the creation of electron-hole pairs during the exposure. It was… More > Graphic Abstract

Karim Ragui¹, Mengshuai Chen^1,2, Lin Chen^1,2,3,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.3, pp. 1-2, 2023, DOI:10.32604/icces.2023.010378

Abstract The ambiguous dynamics associated with heat and mass transfer of invading carbon dioxide in sub-critical and supercritical states, as well as the response of pore-scale resident fluids, play a key role in understanding CO₂ capture and storage (CCUS) and the corresponding phase equilibrium mechanisms. To this end, this paper reveals the transport mechanisms of invading supercritical carbon dioxide (sCO₂) in polluted micromodels using a variant of Lattice-Boltzmann Color Fluid model and descriptive experimental data. The breakthrough time is evaluated by characterizing the displacement velocity, the capillary to pressuredifference ratio, and the transient heat and mass diffusion at a series of… More >

Kun Cai^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.3, pp. 1-2, 2023, DOI:10.32604/icces.2023.09777

Abstract Rotary nanomotor, as the essential component of a dynamic nanomachine, can output rotation via its rotor. So far, several techniques e.g., electric-, nanofluid-, laser-, chemical-, and thermally-driven models, have been proposed to actuate a rotary nanomotor,. Among the techniques, the thermally-driven rotary nanomotor (TDRM) models are the simplest technique that does not require an accurate external field as into energy. The model says that the thermal vibration of the atoms in the nanomotor can transmitted into rotationally kinetic energy via a rotor. Cai et al. [1] discovered the TDRM when relaxing double-walled carbon nanotubes (CNTs) at an NVT ensemble. Soon… More >

Bradley Doleman^a , Messiha Saad^a,*

Frontiers in Heat and Mass Transfer, Vol.4, No.2, pp. 1-8, 2013, DOI:10.5098/hmt.v4.2.3006

Abstract Thermal diffusivity, specific heat, and thermal conductivity are important thermophysical properties of composite materials. These properties play a significant role in the engineering design process of space systems, aerospace vehicles, transportation, energy storage devices, and power generation including fuel cells. This paper examines these thermophysical properties of the AS4/3501-6 composite using the xenon flash method to measure the thermal diffusivity in accordance with ASTM E1461 and differential scanning calorimetry to measure the specific heat in accordance with ASTM E1269. The thermal conductivity was then calculated using a proportional relationship between the density, specific heat, and thermal diffusivity. More >