Craig Clemons

Journal of Renewable Materials, Vol.4, No.5, pp. 327-339, 2016, DOI:10.7569/JRM.2016.634112

Abstract Continuous fibers are commonly manufactured for a wide variety of uses such as filters, textiles, and composites. For example, most fibrous reinforcements (e.g., carbon fiber, glass fiber) for advanced composites are continuous fibers or yarns, fabrics, and preforms made from them. This allows broad flexibility in design and manufacturing approaches by controlling fiber orientation and architecture. However, there has been growing interest in preparing continuous fibers from biobased materials such as plants. Of particular recent interest are nanocelluloses, which are projected to be less expensive than many other nanomaterials and have the potential to be produced in large volumes. They… More >

Nicole M. Stark

Journal of Renewable Materials, Vol.4, No.5, pp. 313-326, 2016, DOI:10.7569/JRM.2016.634115

Abstract Performance requirements for packaging films may include barrier properties, transparency, flexibility, and tensile strength. Conventional packaging materials, such as plastic films and laminates, are typically made from petroleum-based polymers. Currently, there is a drive to develop sustainable packaging materials. These alternative materials must be able to be manufactured economically and on a commercial scale, exhibit barrier properties and transparency, and provide adequate mechanical performance. As a biobased, renewable material, cellulose nanomaterials (CNs) are ideally suited to be used in sustainable packaging applications. CNs include cellulose nanocrystals (CNCs) and cellulose nanofibrils (CNFs) and each can provide benefit to packaging films. Manufactured… More >

Ronald Sabo^1*, Aleksey Yermakov², Chiu Tai Law³, Rani Elhajjar⁴

Journal of Renewable Materials, Vol.4, No.5, pp. 297-312, 2016, DOI:10.7569/JRM.2016.634114

Abstract Cellulose nanomaterials have a number of interesting and unique properties that make them well-suited for use in electronics applications such as energy harvesting devices, actuators and sensors. Cellulose nanofibrils and nanocrystals have good mechanical properties, high transparency, and low coefficient of thermal expansion, among other properties that facilitate both active and inactive roles in electronics and related devices. For example, these nanomaterials have been demonstrated to operate as substrates for flexible electronics and displays, to improve the efficiency of photovoltaics, to work as a component of magnetostrictive composites and to act as a suitable lithium ion battery separator membrane. A… More >

F. Luzi, E. Fortunati^*, D. Puglia, R. Petrucci, J.M. Kenny, L. Torre

Journal of Renewable Materials, Vol.4, No.3, pp. 190-198, 2016, DOI:10.7569/JRM.2015.634134

Abstract In this research, the revalorization of Posidonia oceanica leaf sea waste was studied and the acid hydrolysis processing times were modulated in order to optimize the extraction of cellulose nanocrystals (CNCs). The obtained CNCs were deeply investigated. A two-step treatment was applied to extract cellulose nanocrystals from Posidonia oceanica leaves. First, a chemical treatment leads to the removal of lignin and production of holocellulose, while the second chemical process of acid hydrolysis allows the obtainment of cellulose nanocrystals in aqueous suspension. The unbleached and bleached leaves and cellulose nanocrystals were characterized by using thermogravimetric analysis, infrared spectroscopy and morphological investigation;… More >