Raed Alhamad^1,*, Hatem Boujemaa²

CMC-Computers, Materials & Continua, Vol.73, No.3, pp. 5233-5244, 2022, DOI:10.32604/cmc.2022.030793 - 28 July 2022

Abstract In this article, we optimize the powers associated to Non Orthogonal Multiple Access (NOMA) users, sensing and harvesting duration for Cognitive Radio Networks (CRN). The secondary source harvests energy from node A signal. Then, it senses the channel to detect primary source. Then, the secondary source transmits a signal that is reflected by Intelligent Reflecting Surfaces (IRS) so that all reflections have a zero phase at any user. A set Ii of reflectors are associated to user Ui. The use of M = Mi = 512, 256, 128, 64, 32, 16, 8 reflectors per user offers 45, 42, 39, More >

Abdullah G. Alharbi¹, Jawad Mirza², Mehak Raza³, Salman Ghafoor^4,*

CMC-Computers, Materials & Continua, Vol.73, No.3, pp. 5411-5422, 2022, DOI:10.32604/cmc.2022.029317 - 28 July 2022

Abstract In this paper, we report a simulation study on the performance enhancement of Praseodymium doped silica fiber amplifiers (PDFAs) in O-band (1270–1350 nm) in terms of small signal gain, power conversion efficiency (PCE), and output optical power by employing bidirectional pumping. The PDFA performance is examined by optimizing the length of Praseodymium doped silica fiber (PDF), its mode-field diameter (MFD) and the concentration of Pr³⁺. A small-signal peak gain of 56.4 dB, power conversion efficiency (PCE) of 47%, and output optical power of around 1.6 W (32 dBm) is observed at optimized parameters for input signal More >

Yongjiang Zhao, Jae Hung Yoo, Chang Gyoon Lim^*

CMC-Computers, Materials & Continua, Vol.73, No.3, pp. 5671-5686, 2022, DOI:10.32604/cmc.2022.027443 - 28 July 2022

Abstract With the rapid economic growth and improved living standards, electricity has become an indispensable energy source in our lives. Therefore, the stability of the grid power supply and the conservation of electricity is critical. The following are some of the problems facing now: 1) During the peak power consumption period, it will pose a threat to the power grid. Enhancing and improving the power distribution infrastructure requires high maintenance costs. 2) The user's electricity schedule is unreasonable due to personal behavior, which will cause a waste of electricity. Controlling load as a vital part of More >

Jiamao Li^1,2,*, Chuimin Zhang¹, Lin Li¹, Chuangang Fan^1,*, Zhaofang He³, Yuandi Qian³

Journal of Renewable Materials, Vol.10, No.12, pp. 3439-3458, 2022, DOI:10.32604/jrm.2022.021214 - 14 July 2022

Abstract The purpose of this paper was to explore the possibility of using low-alkalinity cementitious materials as binders, in which ground blast furnace slag and fly ash acted as a partial replacement of ordinary Portland cement, and CaSO₄, Na₂SO₄, and CaO were used as a sulfate activator and alkali-activated additives, to solidify gold mine tailings for preparation of a green, inexpensive cemented paste backfill (CPB). For this target, the effects of cement/ tailings ratio, superplasticizer dosage, solid content, tailings fineness on the mechanical properties of the CPB were investigated. Additionally, the hydration mechanism of the CPB was… More >

Kangze Yuan¹, Kui Liu^1,2,*, Guoyang Yi³, Bowen Yang²

Journal of Renewable Materials, Vol.10, No.12, pp. 3611-3627, 2022, DOI:10.32604/jrm.2022.022458 - 14 July 2022

Abstract Cement Stabilized Loess (CSL) sample has a long history as a method of improving building foundations. In this paper, the main physical (specific gravity, consistency limit, optimum moisture content, and maximum dry density) and mechanical properties (Unconfined Compressive Strength (UCS) and shear strength parameters) of CSL samples with different cement content were investigated, and the change reasons were explored by mean of SEM test. Meanwhile, quantitative analysis software Image-Pro Plus (IPP) 6.0 was used to characterize the microstructural evolution of pores in compacted loess and CSL sample. As the cement content increased, the specific gravity… More > Graphic Abstract

Jianan Wu¹, Ke Xue², Zhaowei Ding³, Lei Lang³, Kang Gu³, Xiaolin Li⁴, Mingli Zhang⁵, Desheng Li^3,6,*

Journal of Renewable Materials, Vol.10, No.12, pp. 3167-3183, 2022, DOI:10.32604/jrm.2022.020265 - 14 July 2022

Abstract Thermal insulation is an important indicator to evaluate the construction material in cold region engineering. As we know, adding the industrial waste as lightweight aggregate or creating the pore inside the cement-based composite could make the texture loose, and the thermal insulating capacity of the material would be improved with this texture. Using these methods, the industrial by-product and engineering waste could be cycled in an efficient way. Moreover, after service the fragmented cement composites paste could be used as aggregate in the thermal insulating concrete again. While the porous texture is not favorable for… More > Graphic Abstract

Bo Zhang^1,2, Keqing Li^1,2, Siqi Zhang^1,2, Yafei Hu^1,2, Bin Han^1,2,*

Journal of Renewable Materials, Vol.10, No.12, pp. 3539-3558, 2022, DOI:10.32604/jrm.2022.021845 - 14 July 2022

Abstract Cemented paste backfill (CPB) is a sustainable mining technology that is widely used in mines and helps to improve the mine environment. To investigate the relationship between aggregate grading and different affecting factors and the uniaxial compressive strength (UCS) of the cemented paste backfill (CPB), Talbol gradation theory and neural networks is used to evaluate aggregate gradation to determine the optimum aggregate ratio. The mixed aggregate ratio with the least amount of cement (waste stone content river sand content = 7:3) is obtained by using Talbol grading theory and pile compactness function and combined with… More > Graphic Abstract

Rujian Lan^1,2,3,#, Meiyang Duan^1,2,3,#, Feida Wu^1,2,3,#, Rifang Lai^1,2,3, Zhaowen Mo^1,2,3, Shenggang Pan^1,2,3, Xiangru Tang^1,2,3,*

Phyton-International Journal of Experimental Botany, Vol.91, No.11, pp. 2461-2473, 2022, DOI:10.32604/phyton.2022.021884 - 12 July 2022

Abstract Fragrant rice is popular for the good grain quality and special aroma. The present study conducted a field experiment to investigate the effects of ultrasonic seed treatment on grain yield, quality characters, physiological properties and aroma biosynthesis of different fragrant rice genotypes. The seeds of three fragrant rice genotypes were exposed to 1 min of ultrasonic vibration and then cultivated in paddy field. The results of present study showed that ultrasonic seed treatment increased grain yield of all fragrant rice genotypes but the responses of yield formation to ultrasonic were varied with different genotypes. Compared with More >

Jiamao Li^1,2,*, Tao Si¹, Lin Li¹, Chuangang Fan^1,*, Zhaofang He³, Yuandi Qian³

Journal of Renewable Materials, Vol.10, No.11, pp. 3041-3058, 2022, DOI:10.32604/jrm.2022.020054 - 29 June 2022

Abstract The purpose of this paper was using gold mine tailings and cemented materials with low alkalinity to fabricate baking-free bricks. The obtained baking-free brick samples were evaluated by unconfined compressive strength (UCS), water absorption percentage, freezing-thawing cycle, and drying-wetting cycle. The microstructures of the baking-free brick samples were analyzed using X-ray diffraction (XRD) and scanning electron microscope (SEM) techniques. The baking-free brick specimens cured for 28 days with the addition of 10% mixing water consumption and 1:6 cement/tailing ratio tended to obtain favorable comprehensive properties such as a high compressive strength of 15.15 MPa, a… More > Graphic Abstract

Jianqiao Yu^1,*, Hongxia Qiao^1,2, Theogene Hakuzweyezu¹, Feifei Zhu¹

Journal of Renewable Materials, Vol.10, No.11, pp. 2973-2987, 2022, DOI:10.32604/jrm.2022.019620 - 29 June 2022

Abstract This study was designed to solve the problem of magnesium hazards due to potash extraction in the salt lake region. Using basalt fiber (BF) as the reinforcement material and magnesium oxychloride cement (MOC) as the gelling material, a BF/MOC composite material was prepared. Firstly, the effect of BF addition content on the basic mechanical properties of the composites was investigated. Then, through the salt spray corrosion test, the durability damage deterioration evaluation analysis was carried out from both macroscopic and microscopic aspects using mass change, relative dynamic modulus of elasticity (RDME) change, SEM analysis and… More >