Ram P. Ghosh¹, Matteo Bianchi¹, Gil Marom², Oren M. Rotman¹, Brandon Kovarovic¹, Danny Bluestein^1,*

Molecular & Cellular Biomechanics, Vol.16, Suppl.2, pp. 12-14, 2019, DOI:10.32604/mcb.2019.07379

Abstract This article has no abstract. More >

Han Yu¹, Pedro J. del Nido², Tal Geva³, Chun Yang⁴, Zheyang Wu⁴, Rahul H. Rathod³, Xueying Huang⁵, Kristen L. Billiar⁶, Dalin Tang^1,4,*

Molecular & Cellular Biomechanics, Vol.16, Suppl.1, pp. 73-74, 2019, DOI:10.32604/mcb.2019.05837

Abstract Ventricle mechanical stress and strain calculations play an important role in cardiovascular investigations. Patients with repaired tetralogy of Fallot (TOF) account for the majority of cases with late onset right ventricular (RV) failure. The current surgical approach, including pulmonary valve replacement(PVR), has yielded mixed results with some patients recover RV function after pulmonary valve insertion with or without concomitant RV remodeling surgery but some do not[Therrien, Siu and McLaughlin (2000);]. Cardiac magnetic resonance (CMR) data were collected from 6 healthy volunteers and 12 Tetralogy of Fallot (TOF) patients before PVR with consent obtained. 12 patients… More >

Dingqian Ding^1,2, Yongtu Liang^1,*, Yansong Li^1,3, Jianfei Sun¹, Dong Han¹, Jing Liu⁴

CMES-Computer Modeling in Engineering & Sciences, Vol.121, No.1, pp. 273-290, 2019, DOI:10.32604/cmes.2019.07228

Abstract The solid particle impurities generated by pipe wall corrosion might deposit at the elbow of hilly pipelines during the production shutdown of oil pipelines. These solid particle impurities will seriously affect the safety of the pipeline operation and the quality of the petroleum products. Thus, it is necessary to study the methods of removing these trapped particles from pipelines. At present, the most common way to remove these solid particle impurities is pigging oil pipelines periodically by utilizing the mechanical pigging method, while the frequent pigging operation will increase the cost and risk of pipeline… More >

Han Li¹, Tianding Chen^{2, *}, Hualiang Teng³, Yingtao Jiang⁴

CMES-Computer Modeling in Engineering & Sciences, Vol.118, No.2, pp. 253-274, 2019, DOI:10.31614/cmes.2019.05807

Abstract In any classical value-based reinforcement learning method, an agent, despite of its continuous interactions with the environment, is yet unable to quickly generate a complete and independent description of the entire environment, leaving the learning method to struggle with a difficult dilemma of choosing between the two tasks, namely exploration and exploitation. This problem becomes more pronounced when the agent has to deal with a dynamic environment, of which the configuration and/or parameters are constantly changing. In this paper, this problem is approached by first mapping a reinforcement learning scheme to a directed graph, and… More >

Suzhen Wang¹, Shanshan Geng¹, Zhanfeng Zhang¹, Anshan Ye², Keming Chen², Zhaosheng Xu², Huimin Luo², Gangshan Wu^3,*, Lina Xu⁴, Ning Cao⁵

CMC-Computers, Materials & Continua, Vol.61, No.2, pp. 739-757, 2019, DOI:10.32604/cmc.2019.06097

Abstract Spark is a distributed data processing framework based on memory. Memory allocation is a focus question of Spark research. A good memory allocation scheme can effectively improve the efficiency of task execution and memory resource utilization of the Spark. Aiming at the memory allocation problem in the Spark2.x version, this paper optimizes the memory allocation strategy by analyzing the Spark memory model, the existing cache replacement algorithms and the memory allocation methods, which is on the basis of minimizing the storage area and allocating the execution area according to the demand. It mainly including two… More >

Jichang Wang, Xiaoming Guo^*, Xiaoxiao Sun

The International Conference on Computational & Experimental Engineering and Sciences, Vol.21, No.4, pp. 79-79, 2019, DOI:10.32604/icces.2019.05248

Abstract Cement mortar is an important component of many composite materials and one of the most widely used materials in engineering construction. At microscopic level, cement mortar can be regarded as a multiphase material composed of fine aggregates, cement paste, and a great many of initial defects, the form of which are micro-cracks and micro-voids. The macroscopic properties of cement mortar will be influenced by mechanical properties of different constituents and complex internal structures. The microscopic model containing micro-voids is established by the method of secondary development. The process of cement mortar damage fracture is studied.… More >

Fadhel Aloulou^1,*, Sabrine Alila², Habib Sammouda¹

Journal of Renewable Materials, Vol.7, No.8, pp. 763-774, 2019, DOI:10.32604/jrm.2019.04071

Abstract The influence of nanofiberwood on the properties of the fresh condition of cement based mortars is not known in detail, despite recent advances in nanocellulose technology and it is related composite materials. Nanofiber wood from industrial waste, produced by high-pressure homogenization, was used as cement partial replacement for cement paste at a content ranging from 0% to 2% by weight of cement. The effect of the nanofiber wood content on the porosity, the compressive strength and the degree of hydration of the cement was investigated. Results have shown an improvement in the compressive strength by… More >

Nina Graupner^1,*, Koranat Narkpiban^2,5, Thiprada Poonsawat³, Porntip Tooptompong⁴, Jörg Müssig¹

Journal of Renewable Materials, Vol.7, No.8, pp. 693-711, 2019, DOI:10.32604/jrm.2019.06785

Abstract Toddy palm fruit have an apparent density below 0.8 g/cm³ and offer an interesting lightweight construction potential in polylactide (PLA) composites reinforced with 37 mass-% fibres. Single fibre bundles show similar mechanical properties compared with coir: tensile strength of 240 MPa, Young´s modulus of 3.8 GPa and an elongation at break of 31%. However, density and diameter (~ 50 μm) of fruit fibre bundles are significantly lower. The compression moulded composites have a density of 0.9 g/cm³ and achieved an unnotched Charpy impact strength of 12 kJ/m², a tensile strength of 25 MPa, Young’s modulus… More >

Fadhel Aloulou^1,*, Alila Sabrine², Habib Sammouda¹

Journal of Renewable Materials, Vol.7, No.7, pp. 631-641, 2019, DOI:10.32604/jrm.2019.04070

Abstract Wood nanofibers from industrial waste have been used as polymeric material to reinforce the cement paste to a content of up to 2% by weight of cement. The effect of the wood nanofibre content on the porosity, the compressive strength and the degree of hydration of the cement was studied. The results showed an improvement in compressive strength of over 50% with 1% of added fiberwood. Chemical modification of nanofiber wood by grafting alkyl chains to their surface can reduce the amount of water absorbed by the sample. Addition of an anionic additive (SDBS) to More >

Fadhel Aloulou^1,*, Sabrine Alila²

Journal of Renewable Materials, Vol.7, No.6, pp. 557-566, 2019, DOI:10.32604/jrm.2019.00141

Abstract Nanofibrillated wood fiber was used as fillers in the partial cement matrix replacing the cement to a content of up to 2% by weight of cement. The nanofibrillated effect of wood fibers on porosity, thermal properties and compressive strength was studied. The results obtained showed an improvement in compressive strength of more than 40% with 1% by weight of wood fiber nanofibrillate. The addition of nanofibrillated wood fiber shows a good pore reduction, and the best result was obtained with emulsion of a mixture incorporating 1% by weight of wood fiber nanofibrillate in the presence More >