K.S. Kim¹, B.H. Lee², M.H. Kim¹, J.C. Park³

CMES-Computer Modeling in Engineering & Sciences, Vol.79, No.3&4, pp. 201-222, 2011, DOI:10.3970/cmes.2011.079.201

Abstract The coupling and interactions between vessel motion and inner-tank sloshing are investigated by a potential-CFD (Computational Fluid Dynamics) hybrid method in time domain. Potential-theory-based 3D diffraction/radiation panel program is used to obtain the hydrodynamic coefficients and wave forces for the simulation of vessel motion in time domain. The liquid sloshing in tanks is simulated in time domain by using the improved Moving Particle Simulation (PNU-MPS) method and it is validated through comparison against sloshing experiments. The calculated sloshing tank forces and moments are applied to the vessel-motion simulation as excitation forces and moments. The updated… More >

P. Maghoul¹, B. Gatmiri^1,2, D. Duhamel¹

CMES-Computer Modeling in Engineering & Sciences, Vol.78, No.1, pp. 51-76, 2011, DOI:10.3970/cmes.2011.078.051

Abstract This paper aims at obtaining boundary integral formulations as well as three dimensional(3D) fundamental solutions for unsaturated soils under dynamic loadings for the first time. The boundary integral equations are derived via the use of the weighted residuals method in a way that permits an easy discretization and implementation in a Boundary Element code. Also, the associated 3D fundamental solutions for such deformable porous medium are derived in Laplace transform domain using the method of Hérmander. The derived results are verified analytically by comparison with the previously introduced corresponding fundamental solutions in elastodynamic limiting case. More >

H.F.Qiang¹, F.Z.Chen¹, W.R. Gao¹

CMES-Computer Modeling in Engineering & Sciences, Vol.77, No.3&4, pp. 239-262, 2011, DOI:10.3970/cmes.2011.077.239

Abstract Based on smoothed particle hydrodynamics (SPH) method with surface tension proposed by Morris, this paper is intended to modify equations for surface tension by modifying normal and curvature with corrective smoothing particle method (CSPM). Compared with the continuum surface force (CSF) model for surface tension employed in the traditional SPH method, the accuracy in the present paper is much higher in terms of handling the problems with large deformation and surface tension. The reason is that in the traditional SPH method the deficiency of particles is near the boundary and sharp-angled areas, and it causes… More >

Xiaowei Zeng¹

CMES-Computer Modeling in Engineering & Sciences, Vol.74, No.3&4, pp. 183-202, 2011, DOI:10.3970/cmes.2011.074.183

Abstract This paper presents an atomistic field theory and its application in modeling and simulation of nano/micro materials. Atomistic formulation and finite element implementation of the atomistic field theory is briefly introduced. Numerical simulations based on the field theory are performed to investigate the material behaviors of bcc iron at coarse-grained scale and we have obtained the mechanical strength and elastic modulus, which are in good agreement with results by first principles calculations. Also the nanoscale deformation and failure mechanism are revealed in bcc iron nanorods under simple tension. It is interesting to observe that under More >

Yi W. Wan¹, Huan J. Keh²

CMES-Computer Modeling in Engineering & Sciences, Vol.74, No.2, pp. 109-138, 2011, DOI:10.3970/cmes.2011.074.109

Abstract The steady rotation of an axially symmetric particle about its axis of revolution normal to two plane walls at an arbitrary position between them in a viscous fluid is studied theoretically in the limit of small Reynolds number. The fluid is allowed to slip at the surface of the particle. A method of distribution of a set of spherical singularities along the axis of revolution inside a prolate particle or on the fundamental disk within an oblate particle is used to find the general solution for the fluid velocity distribution that satisfies the boundary conditions… More >

D.M.S. Albuquerque¹, J.M.C. Pereira¹, J.C.F. Pereira^1,2

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.4, pp. 337-366, 2011, DOI:10.3970/cmes.2011.072.337

Abstract A numerical study of fluid-structure interaction is presented for the analysis of viscous flow over a resonant membrane airfoil in hovering flight. A flexible membrane moving with a prescribed stroke period was naturally excited to enter into 1st, 2nd and 3rd mode of vibration according to the selected membrane tension. The Navier-Stokes equations were discretized on a moving body unstructured grid using the finite volume method. The instantaneous membrane position was predicted by the 1D unsteady membrane equation with input from the acting fluid flow forces. Following initial validation against reported rigid airfoils predictions, the… More >

Jinling Long^1,2, Bingang Xu^1,3, Xiaoming Tao¹

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.4, pp. 273-298, 2011, DOI:10.3970/cmes.2011.072.273

Abstract Moving slender threadline structures are widely used in various engineering fields. The dynamics of these systems is sometimes time dependent but in most cases follows a periodic pattern, and slender yarn motion in textile engineering is a typical problem of this category. In the present paper, we propose a nonlinear approach to model the dynamic behavior of slender threadline structures with a real example in the analysis of slender yarn motion in spinning. Moving boundary conditions of yarn are derived and a consequence of the perturbation analysis for the dimensionless governing equations provides the zero More >

Veturia Chiroiu¹, Ligia Munteanu², Ioan Ursu³

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.3, pp. 229-246, 2011, DOI:10.3970/cmes.2011.072.229

Abstract Chaotic behavior of uncertain nonlinear systems offers a rich variety of orbits, which can be controlled by bounding the signals involved in closed-loop systems. In this paper, systems with nonlinear uncertainties with no prior knowledge of their bounds, unmodeled dynamic law and rapidly varying disturbances are analyzed in order to propose a stabilization controller of the chaotic behavior via the fuzzy logic systems. More >

N. Liu,¹,W. Gao ¹, C.M. Song¹, N. Zhang²

CMES-Computer Modeling in Engineering & Sciences, Vol.72, No.2, pp. 79-102, 2011, DOI:10.3970/cmes.2011.072.079

Abstract This paper presents the probabilistic dynamic analysis of vehicle-bridge interaction systems. The bridge's and vehicle's parameters are considered as random variables as well as the road surface roughness is modeled as random process. A two-degree-of-freedom spring-mass system is used to represent a moving vehicle and the bridge is modeled as an Euler-Bernoulli beam. From the equation of motion for the vehicle-bridge coupling system, the expressions for mean value and standard deviation of bridge response are developed by using the random variable's functional moment method. The effects of the individual system parameters and the road surface More >

A. Idesman ¹

CMES-Computer Modeling in Engineering & Sciences, Vol.71, No.2, pp. 111-148, 2011, DOI:10.3970/cmes.2011.071.111

Abstract The paper deals with the following issues of existing time-integration methods for a semi-discrete system of elastodynamics equations: a) the quantification and the suppression of spurious high frequencies; b) the selection of the amount of numerical dissipation for a time-integration method; and c) accurate time integration of low modes. The finite element method used in the paper or other methods can be applied for the space discretization. A new two-stage time-integration procedure consisting of basic computations and the filtering stage is developed. For accurate integration of all frequencies, a time-integration method with zero (or small)… More >