T. Yoda¹, N. Kodama²

CMES-Computer Modeling in Engineering & Sciences, Vol.11, No.1, pp. 1-8, 2006, DOI:10.3970/cmes.2006.011.001

Abstract A nonlinear dynamic response analysis of a box section steel rigid frame under seismic action is proposed on the basis of a beam model. The average stress-strain relation of the beam model can be formulated for transverse stiffener spacing, in which stress-strain relation after local buckling is assumed. As a result of the present study, the maximum lateral displacements and the residual displacements of a box section steel rigid frame were well estimated by the proposed beam element model that considers the deterioration effect due to local buckling. More >

Sunil Punjabi¹, K. Muralidhar², P. K. Panigrahi²

FDMP-Fluid Dynamics & Materials Processing, Vol.2, No.2, pp. 95-106, 2006, DOI:10.3970/fdmp.2006.002.095

Abstract Convection in a differentially heated two-layer system consisting of air and water was studied experimentally, using laser-interferometry. The cavity used for flow visualization was square in cross-section and rectangular in-plan having dimensions of 447 × 32 × 32 mm³. Experiments performed over different layer thicknesses of water filled in a square cross-section cavity, the rest being air, are reported in the present work. The following temperature differences for each layer height were imposed across the hot and the cold walls of the superposed fluid layers: (i) ΔT=10K and (ii)ΔT =18 K. The present study was aimed… More >

V. Pletser¹, R. Bosch², L. Potthast², R. Kassel³

FDMP-Fluid Dynamics & Materials Processing, Vol.2, No.1, pp. 65-76, 2006, DOI:10.3970/fdmp.2006.002.065

Abstract Orbital weightless conditions have been shown to yield better and larger crystals. The Solution Crystallization Diagnostics Facility (SCDF) is a third generation instrument developed by ESA and dedicated to the observation and study with advanced diagnostics nucleation and crystallisation processes of molecules from solutions on board the International Space Station. The SCDF is intended to be used for studies of proteins and large biomolecules, and more generally of any kind of molecules growing from solutions, using the powerful set of diagnostics means available in the SCDF platform. Several protein crystallisation reactors have been developed to More >

R. Han¹, M.S. Ingber¹, H.L. Schreyer¹

CMC-Computers, Materials & Continua, Vol.4, No.3, pp. 163-176, 2006, DOI:10.3970/cmc.2006.004.163

Abstract Decohesion is an important failure mode associated with fiber-reinforced composite materials. Analysis of failure progression at the fiber-matrix interfaces in fiber-reinforced composite materials is considered using a softening decohesion model consistent with thermodynamic concepts. In this model, the initiation of failure is given directly by a failure criterion. Damage is interpreted by the development of a discontinuity of displacement. The formulation describing the potential development of damage is governed by a discrete decohesive constitutive equation. Numerical simulations are performed using the direct boundary element method. Incremental decohesion simulations illustrate the progressive evolution of debonding zones More >

D.L. Young^1,2, C.C. Tsai³, Y.C. Lin¹, C.S. Chen⁴

CMC-Computers, Materials & Continua, Vol.4, No.1, pp. 1-10, 2006, DOI:10.3970/cmc.2006.004.001

Abstract This paper describes the method of fundamental solutions (MFS) to solve eigenfrequencies of plate vibrations by utilizing the direct determinant search method. The complex-valued kernels are used in the MFS in order to avoid the spurious eigenvalues. The benchmark problems of a circular plate with clamped, simply supported and free boundary conditions are studied analytically as well as numerically using the discrete and continuous versions of the MFS schemes to demonstrate the major results of the present paper. Namely only true eigenvalues are contained and no spurious eigenvalues are included in the range of direct More >

G. Haasemann¹, M. Kästner¹ and V. Ulbricht¹

CMC-Computers, Materials & Continua, Vol.3, No.3, pp. 131-146, 2006, DOI:10.3970/cmc.2006.003.131

Abstract Novel textile reinforced composites provide an extremely high adaptability and allow for the development of materials whose features can be adjusted precisely to certain applications. A successful structural and material design process requires an integrated simulation of the material behavior, the estimation of the effective properties which need to be assigned to the macroscopic model and the resulting features of the component. In this context two efficient modelling strategies - the Binary Model (Carter, Cox, and Fleck (1994)) and the Extended Finite Element Method (X-FEM) (Moës, Cloirec, Cartraud, and Remacle (2003)) - are used to… More >

Shen Yubin¹, Xie Huicai^1,2, Den Wei¹

CMC-Computers, Materials & Continua, Vol.3, No.2, pp. 49-54, 2006, DOI:10.3970/cmc.2006.003.049

Abstract Bonding an overlay of new concrete onto the damaged concrete is a usual repair method. Because of the different shrinkage rate of the new and old concrete, restrained shrinkage cracks will appear in the new concrete. The cracks will reduce durability and strength of the repaired structure. A new repair method using an interface layer of carbon fiber reinforced cement mortar between new and old concrete was developed in this paper. The new method was found to be very effective in reducing shrinkage cracking of repaired beams and slabs. Comparing with normal repaired beams, the More >

Lingfei Gao¹, Xiaoping Zheng^1,2, Zhenhan Yao¹

CMC-Computers, Materials & Continua, Vol.3, No.1, pp. 25-36, 2006, DOI:10.3970/cmc.2007.003.025

Abstract A general numerical approach is developed to model the elastic behaviours and failure processes of heterogeneous materials. The heterogeneous material body is assumed composed of a large number of convex polygon lattices with different phases. These phases are locally isotropic and elastic-brittle with the different lattices displaying variable material parameters and a Weibull-type statistical distribution. When the effective strain exceeds a local fracture criterion, the full lattice exhibits failure uniformly, and this is modelled by assuming a very small Young modulus value. An auto-select loading method is employed to model the failure process. The proposed More >

KARINA SAYURI UTSUNOMIYA*, MARIA SUELY PAGLIARINI*, CACILDA BORGES DO VALLE**

BIOCELL, Vol.29, No.3, pp. 295-301, 2005, DOI:10.32604/biocell.2005.29.295

Abstract The genus Brachiaria (Trin.) Griseb. has achieved considerable importance to cattle production systems, as a result of the good production and adaptation of a few cultivars to poor and acid soils of the Brazilian savannas. Many of its species and accessions are polyploid and apomictic, which limits direct hybridization. To assist the breeding program, cytogenetic characterization has been undertaken on the accessions of Brachiaria collection at the Embrapa Beef Cattle Research Center. In this study, chromosome number and meiotic behavior are reported for the Brachiaria nigropedata (Ficalho & Hiern) Stapf collection. The 20 available accessions are tetraploid… More >

ROBERTO YUNES, PEDRO FERNÁNDEZ, GUSTAVO F. DONCEL, ANÍBAL A. ACOSTA

BIOCELL, Vol.29, No.3, pp. 287-293, 2005, DOI:10.32604/biocell.2005.29.287

Abstract Our objective was to determine the effect of phosphodiesterase (PDE) inhibition on: 1) tyrosine phosphorylation of human spermatozoa at the tail level; and 2) sperm motion parameters and hyperactivated motility. The study was conducted with normozoospermic and asthenozoospermic samples incubated under in vitro capacitating conditions. The main outcome measures were computer-assisted sperm motion analysis and fluorescent immunodetection of phosphotyrosine-containing proteins. Pentoxifylline (PTX) was used as PDE inhibitor because of its wide use in the clinic. PTX-treatment significantly increased sperm velocity, hyperactivated motility and tyrosine-phosphorylation, both in normo and asthenozoospermic samples. Tyrosine-phosphorylation of tail proteins was highly More >