Sofía Collazo-Bigliardi^1,*, Rodrigo Ortega-Toro², Amparo Chiralt Boix¹

Journal of Renewable Materials, Vol.6, No.6, pp. 599-610, 2018, DOI:10.32604/JRM.2018.00127

Abstract Cellulosic fibres from coffee (CF) and rice (RF) husks have been obtained applying chemical treatments and characterized as to their microstructure and thermal behaviour. These materials have been incorporated into glycerol plasticised thermoplastic starch (TPS) films obtained by melt blending and compression moulding at 1 wt%, 5 wt% and 10 wt%. Microstructure, thermal behaviour and optical, tensile and barrier properties of the composites were analysed. Both kinds of micro-fibres improve the film stiffness while reduced the film stretchability. However, CF better maintained the film ductility at 1 and 5 wt%. A network of fine oriented More >

Cansu Ulker*, Yuksel Guvenilir

Journal of Renewable Materials, Vol.6, No.6, pp. 591-598, 2018, DOI:10.7569/JRM.2017.634189

Abstract As an alternative biodegradable aliphatic polyester, poly(w-pentadecalactone-co-ε-caprolactone) copolymer was synthesized via enzymatic ring-opening polymerization. A new biocatalyst, Candida antarctica lipase B, immobilized onto rice husk ash was used for catalysis. Reactions were carried out at various temperatures and periods for varied copolymer compositions in order to obtain the highest molecular weight copolymer. The best reaction parameters were found to be 80 °C and 6 hours and molecular weights increased proportionally with the amount of w-pentadecalactone (w-PDL). The molecular structure of copolymer with 75% weight ratio of w-PDL (Mn = 19720 g/mol) was characterized by proton More >

Zijian Chen¹, Rui Hou, Jianbing Cheng, Fengjie Fang, Donglin Tang^*, Guangzhao Zhang

Journal of Renewable Materials, Vol.6, No.6, pp. 584-590, 2018, DOI:10.32604/JRM.2018.00120

Abstract Biobased urea nowadays attracts increasing attention as a biomass resource with giant potential, which benefits from the development of biobased ammonia and ecological sanitation system. Urea is an ideal feedstock for chemical industry and developing new urea-based pol ymer materials can take advantage of the urea resource. In this work, a class of renewable linear polyesters, nam ely polyisocyanuratoesters (PICEs) were synthesized from a urea-based monomer bis(2-carbomethoxyethyl) isocyanurate and biobased aliphatic diols. Compared with conventional aliphatic polyesters, PICEs containing isocyanurate rings in the polymer chain backbone exhibit outstanding flame retardancy that both PICE-4 (the number More >

Phornwalan Nanthananon¹, Manus Seadan², Sommai Pivsa-Art³, Hiroyuki Hamada⁴, Supakij Suttiruengwong^1,*

Journal of Renewable Materials, Vol.6, No.6, pp. 573-583, 2018, DOI:10.32604/JRM.2018.00129

Abstract Poor interfacial adhesion between biobased thermoplastics and natural fibers is recognized as a major drawback for biocomposites. To be applicable for the large-scale production, a simple method to handle is of importance. This work presented poly(lactic acid) (PLA) reinforced with short-fiber and three reactive agents including anhydride and epoxide groups were selected as compatibilizers. Biocomposites were prepared by one-step melt-mixing methods. The influence of reactive agents on mechanical, dynamic mechanical properties and morphology of PLA biocomposites were investigated. Tensile strength and storage modulus of PLA biocomposites incorporated with epoxide-based reactive agent was increased 13.9% and More >

Fouad LAOUTID^1,*, Valeriia KARASEVA¹, Lucie COSTES^{1, 2}, Sylvain BROHEZ², Rosica MINCHEVA¹, Philippe DUBOIS¹

Journal of Renewable Materials, Vol.6, No.6, pp. 559-572, 2018, DOI:10.32604/JRM.2018.00004

Abstract In this study, tannic acid (TA) was investigated as flame retardant agent for PLA. Different strategies to modify its thermal degradation pathway have been explored in order to improve its charring effect. The first one consists in combining TA with organomodified montmorillonite (oMMT), and enables limiting the thermo-oxidative degradation of TA and promoting the formation of an effective char layer. Flame-retardant (FR) behavior of PLA-based composition has been found to be positively impacted by this combination since a reduction of the peak of Heat Release Rate (PHRR), more important than the value recorded when oMMT More >

Marwa Abida^1,2, Jamel Mars^3,*, Florian Gehring¹, Alexandre Vivet¹, Fakhreddine Dammak³

Journal of Renewable Materials, Vol.6, No.5, pp. 464-476, 2018, DOI:10.32604/JRM.2018.01897

Abstract Based on experimental test results, flax fiber reinforced polymer composites are characterized by nonlinear visco-elastoplastic behavior. The aim of this work is to model the quasi-unidirectional flax fiber reinforced composite behavior through a three dimensional formulation with orthotropic elasticity and orthotropic plasticity using Hill criterion. The isotropic hardening and Johnson Cook parameters are identified from unidirectional tensile tests at different strain rates. The adjustment of Hill’s yield criterion is developed based on yield stresses obtained in tensile tests at different directions. The numerical integration of the constitutive equations is implemented in a user-defined material, UMAT More >

Victor Gomes Lauriano Souza¹, Patrícia Freitas Rodrigues², Maria Paula Duarte¹, Ana Luísa Fernando^1*

Journal of Renewable Materials, Vol.6, No.5, pp. 548-558, 2018, DOI:10.7569/JRM.2018.634104

Abstract The aim of this work was to develop an active biopolymer based on chitosan by incorporating natural antioxidants. Five essential oils (ginger, rosemary, sage, tea tree and thyme) and six hydro-alcoholic extracts (from ginger, green and black tea, kenaf leaves, rosemary and sage plants) were tested. Migration assays were carried out to evaluate the films' activity, and total phenolic content and antioxidant activity were monitored in the simulant during storage. Interaction between natural compounds and polymeric matrix was evaluated by FTIR spectroscopy. The diffusion of the phenolic compounds was not detected in the films incorporated More >

Sawsan Dacrory^1*, Hussein Abou-Yousef¹, Ragab E. Abou-Zeid¹, Samir Kamel¹, Mohamed S. Abdel-Aziz², Mohamed Elbadry³

Journal of Renewable Materials, Vol.6, No.5, pp. 536-547, 2018, DOI:10.7569/JRM.2017.634190

Abstract Carboxymethyl cellulose hydrogels were developed through crosslinking process using eco-friendly crosslinkers such as maleic, succinic, and citric acids. Carboxymethyl cellulose was prepared from the cellulosic fraction of olive industry residues. A series of hydrogels with varying crosslinker acid concentrations, reaction times, and reaction temperatures was produced to study the swelling capacities and gel fraction of the obtained hydrogels. Additional study pertains to the preparation of antimicrobial nanocomposite hydrogels through in-situ incorporation of the silver nanoparticles during the crosslinking reaction. Silver nanoparticles were prepared by reduction of AgNO3with leaves of Ricinus communis. The particle size of More >

Ahmad Safwan¹, Mohammad Jawaid^1*, Mohamed T. H. Sultan^1,2, Azman Hassan³

Journal of Renewable Materials, Vol.6, No.5, pp. 529-535, 2018, DOI:10.7569/JRM.2018.634103

Abstract The application of natural fibers as reinforcement in composite material has increased due to environmental concerns, low cost, degradability and health concerns. The purpose of this study is to identify the best type of bamboo fibers to be used as reinforcement for kenaf (K)/bamboo hybrid composite. There were three types of bamboo fibers evaluated in this study which include bamboo mat (B), bamboo fabric (BF) and bamboo powder (BP). Chemical composition of B, BF, BP and K fibers were analyzed in this study. The effect of different types of bamboo fibers on tensile, impact, and More >

Maha L. Shrestha^{1, 2,*}, Mihail Ionescu¹, Xianmei Wan¹, Zoran S. Petrović¹

Journal of Renewable Materials, Vol.6, No.5, pp. 504-516, 2018, DOI:10.7569/JRM.2017.634187

Abstract Biobased aromatic-aliphatic polyols were previously synthesized from a thermal thiol-ene reaction of propoxylated cardanol with 2-mercaptoethanol (ME) in the presence of azobisisobutyronitrile (AIBN) as a radical initiator. Cardanol used for this purpose was obtained as a dark-brown liquid (Gardner Color Reference ∼18). The photochemical thiol-ene reaction can also be used to prepare aromatic-aliphatic polyols by employing cardanol. Via the photochemical thiol-ene reaction, 2-mercaptoethanol was added successfully to C=C double bond of cardanol, suggesting that phenolic group may not play an inhibitory role in the radical thiol-ene reaction. However, we preferred to alkoxylate the phenolic hydroxyl More >