E. J. Sellountos¹, A. Sequeira¹, D. Polyzos²

CMES-Computer Modeling in Engineering & Sciences, Vol.41, No.3, pp. 215-242, 2009, DOI:10.3970/cmes.2009.041.215

Abstract A Meshless Local Petrov-Galerkin (MLPG) method based on Local Boundary Integral Equation (LBIE) techniques is employed here for the solution of transient elastic problems with damping. The Radial Basis Functions (RBF) interpolation scheme is exploited for the meshless representation of displacements throughout the computational domain. On the intersections between the local domains and the global boundary, tractions are treated as independent variables via conventional boundary interpolation functions. The MLPG(LBIE)/RBF method is applied to both transient and steady-state Fourier transform elastodynamic domains. In both cases the LBIEs employ the simple elastostatic fundamental solution instead of the More >

LiviuMarin ¹

CMC-Computers, Materials & Continua, Vol.12, No.1, pp. 71-100, 2009, DOI:10.3970/cmc.2009.012.071

Abstract In this paper, the alternating iterative algorithm originally proposed by Kozlov, Maz'ya and Fomin (1991) is numerically implemented for the Cauchy problem in anisotropic heat conduction using a meshless method. Every iteration of the numerical procedure consists of two mixed, well-posed and direct problems which are solved using the method of fundamental solutions (MFS), in conjunction with the Tikhonov regularization method. For each direct problem considered, the optimal value of the regularization parameter is chosen according to the generalized cross-validation (GCV) criterion. An efficient regularizing stopping criterion which ceases the iterative procedure at the point More >

Liviu Marin¹, Andreas Karageorghis²

CMC-Computers, Materials & Continua, Vol.10, No.3, pp. 259-294, 2009, DOI:10.3970/cmc.2009.010.259

Abstract We study the stable numerical identification of an unknown portion of the boundary on which a given boundary condition is provided and additional Cauchy data are given on the remaining known portion of the boundary of a two-dimensional domain for problems governed by either the Helmholtz or the modified Helmholtz equation. This inverse geometric problem is solved using the method of fundamental solutions (MFS) in conjunction with the Tikhonov regularization method. The optimal value for the regularization parameter is chosen according to Hansen's L-curve criterion. The stability, convergence, accuracy and efficiency of the proposed method More >

O. Ohta¹, F. Gao¹, T. Matsuzawa²

The International Conference on Computational & Experimental Engineering and Sciences, Vol.7, No.3, pp. 146-150, 2008, DOI:10.3970/icces.2008.007.146

Abstract The aortic disease is 2nd place of the cause of death. If the thoracic part and the dissociation are matched, the aortic aneurysm exceeds 60 percent. The aneurysm decided based on the maximum diameter of the aneurysm from the image of which it takes a picture with CT or MRI etc. as such a diagnostic indicator. The appearance of disease, the development, and the rupture of the arterial hemangioma are thought that the hemodynamics such as intravasculars and vessel walls plays an important role [1,2]. Then, we simulated the aneurysm of descending aorta in consideration More >

S.P. Hu¹, D.L. Young^1,2, C.M. Fan¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.6, No.1, pp. 25-50, 2008, DOI:10.3970/icces.2008.006.025

Abstract In this paper, a novel numerical scheme called (FDMFS), which combines the finite difference method (FDM) and the method of fundamental solutions (MFS), is proposed to simulate the nonhomogeneous diffusion problem with an unsteady forcing function. Most meshless methods are confined to the investigations of nonhomogeneous diffusion equations with steady forcing functions due to the difficulty to find an unsteady particular solution. Therefore, we proposed a FDM with Cartesian grid to handle the unsteady nonhomogeneous term of the equations. The numerical solution in FDMFS is decomposed into a particular solution and a homogeneous solution. The… More >

LiviuMarin ¹

CMES-Computer Modeling in Engineering & Sciences, Vol.37, No.3, pp. 203-242, 2008, DOI:10.3970/cmes.2008.037.203

Abstract In this paper, a meshless method for the stable solution of direct and inverse problems associated with the two-dimensional Laplace equation in the presence of boundary singularities and noisy boundary data is proposed. The governing equation and boundary conditions are discretized by the method of fundamental solutions (MFS), whilst the existence of the boundary singularity is taken into account by subtracting from the original MFS solution the corresponding singular solutions, as given by the asymptotic expansion of the solution near the singular point. However, even in the case when the boundary singularity is accounted for, More >

Sirajul Haq¹, Siraj-ul-Islam², Arshed Ali³

CMES-Computer Modeling in Engineering & Sciences, Vol.38, No.1, pp. 1-24, 2008, DOI:10.3970/cmes.2008.038.001

Abstract In this paper we propose a meshfree technique for the numerical solution of the modified equal width wave (MEW) equation. Combination of collocation method using the radial basis functions (RBFs) with first order accurate forward difference approximation is employed for obtaining meshfree solution of the problem. Different types of RBFs are used for this purpose. Performance of the proposed method is successfully tested in terms of various error norms. In the case of non-availability of exact solution, performance of the new method is compared with the results obtained from the existing methods. Propagation of a More >

Q. Ma¹, C. Levy², M. Perl³

CMES-Computer Modeling in Engineering & Sciences, Vol.29, No.2, pp. 95-110, 2008, DOI:10.3970/cmes.2008.029.095

Abstract Networks of radial and longitudinally-coplanar, internal, surface cracks are typical in rifled, autofrettaged, gun barrels. In two previous papers, the separate effects of large arrays of either radial or longitudinally-coplanar semi-elliptical, internal, surface cracks in a thick-walled, cylindrical, pressure vessel under both ideal and realistic autofrettage were studied. When pressure is considered solely, radial crack density and longitudinal crack spacing were found to have opposing effects on the prevailing stress intensity factor, K_IP. Furthermore, the addition of the negative stress intensity factor (SIF), K_IA, resulting from the residual stress field due to autofrettage, whether ideal or… More >

Chein-Shan Liu¹

CMES-Computer Modeling in Engineering & Sciences, Vol.28, No.2, pp. 77-94, 2008, DOI:10.3970/cmes.2008.028.077

Abstract The method of fundamental solutions (MFS) is a truly meshless numerical method widely used in the elliptic type boundary value problems, of which the approximate solution is expressed as a linear combination of fundamental solutions and the unknown coefficients are determined from the boundary conditions by solving a linear equations system. However, the accuracy of MFS is severely limited by its ill-conditioning of the resulting linear equations system. This paper is motivated by the works of Chen, Wu, Lee and Chen (2007) and Liu (2007a). The first paper proved an equivalent relation of the Trefftz… More >

S.P. Hu¹, D.L. Young², C.M. Fan¹

CMES-Computer Modeling in Engineering & Sciences, Vol.24, No.1, pp. 1-20, 2008, DOI:10.3970/cmes.2008.024.001

Abstract In this paper, a novel numerical scheme called (FDMFS), which combines the finite difference method (FDM) and the method of fundamental solutions (MFS), is proposed to simulate the nonhomogeneous diffusion problem with an unsteady forcing function. Most meshless methods are confined to the investigations of nonhomogeneous diffusion equations with steady forcing functions due to the difficulty to find an unsteady particular solution. Therefore, we proposed a FDM with Cartesian grid to handle the unsteady nonhomogeneous term of the equations. The numerical solution in FDMFS is decomposed into a particular solution and a homogeneous solution. The… More >