R. Henda¹, W. Quesnel², Z. Saghir³

FDMP-Fluid Dynamics & Materials Processing, Vol.4, No.4, pp. 237-244, 2008, DOI:10.3970/fdmp.2008.004.237

Abstract The transient thermal behavior of a two-dimensional circulating porous bed is analytically investigated. A one-energy equation model, representing both the gas and solid phases via a unified temperature, is employed to describe the thermal behavior of the circulating bed. The latter is essentially a tube and shell heat exchanger commonly used in technologically important applications. The model equation is transformed into a simpler set of partial differential equations using an analytical procedure. The analytical solution, based on the method of separation of variables and the principle of superposition, is formulated for the calculation of the More >

A.Z. Lorbiecka¹, R.Vertnik², H.Gjerkeš¹, G. Manojlovič², B.Senčič², J. Cesar², B.Šarler^1,3

CMC-Computers, Materials & Continua, Vol.8, No.3, pp. 195-208, 2008, DOI:10.3970/cmc.2008.008.195

Abstract A numerical model is developed for the simulation of solidification grain structure formation (equiaxed to columnar and columnar to equiaxed transitions) during the continuous casting process of steel billets. The cellular automata microstructure model is combined with the macroscopic heat transfer model. The cellular automata method is based on the Nastac's definition of neighborhood, Gaussian nucleation rule, and KGT growth model. The heat transfer model is solved by the meshless technique by using local collocation with radial basis functions. The microscopic model parameters have been adjusted with respect to the experimental data for steel 51CrMoV4. More >

Bohdan Mochnacki¹, Grażyna Kaluża²

The International Conference on Computational & Experimental Engineering and Sciences, Vol.1, No.1, pp. 15-20, 2007, DOI:10.3970/icces.2007.001.015

Abstract This article has no abstract. More >

N. Osawa¹, K. Hashimoto¹, J. Sawamura¹, J. Kikuchi², Y. Deguchi², T. Yamaura²

CMES-Computer Modeling in Engineering & Sciences, Vol.20, No.1, pp. 43-54, 2007, DOI:10.3970/cmes.2007.020.043

Abstract A new hypothesis regarding heat transmission during line heating is proposed. It states that the distribution of the temperature of the gas adjacent to the plate, T_G, and the overall local heat transfer coefficient, α, depend only on the distance from the torch. An identification technique for T_G and α is developed. The validity of the employed hypothesis and the proposed technique is demonstrated by comparing the measured and identified T_G during a spot heating test. The plate temperature calculated by direct heat conduction analysis closely approximates the one measured for the spot and line heating tests, More >

V.G. Kozlov¹, N.V. Selin²

FDMP-Fluid Dynamics & Materials Processing, Vol.2, No.2, pp. 107-118, 2006, DOI:10.3970/fdmp.2006.002.107

Abstract Thermal vibrational convection in a sector of a thin spherical liquid layer subjected to pendulum vibrations (spherical pendulum) is investigated theoretically and experimentally. Temperature non-uniformity inside the liquid is caused by uniformly distributed internal heat sources (one side of the layer is isothermal, the other one is adiabatic). Experiments are carried out under conditions of stable temperature stratification in the gravity field. Heat transfer and convective structure are investigated in a wide interval of governing dimensionless parameters. A critical increase of heat transfer is revealed as the vibrations intensity is increased, caused by average convection. More >

N. Simões^1,2, A. Tadeu²

CMES-Computer Modeling in Engineering & Sciences, Vol.9, No.3, pp. 221-234, 2005, DOI:10.3970/cmes.2005.009.221

Abstract The use of the Boundary Element Method (BEM) to formulate the 3D transient heat transfer through cylindrical structures with irregular cross-sections, bounded by a homogeneous elastic medium, is described in this paper. In this formulation, both the conduction and the convection phenomena are modeled. This system can be subjected to heat emitted by either point or line sources located somewhere in the media. The solution is first obtained in the frequency domain for a wide range of frequencies and axial wavenumbers. Time domain responses are later calculated by means of (fast) inverse Fourier transforms into More >

B. Šarler¹

CMES-Computer Modeling in Engineering & Sciences, Vol.7, No.2, pp. 185-194, 2005, DOI:10.3970/cmes.2005.007.185

Abstract This paper explores the application of the mesh-free radial basis function collocation method for solution of heat transfer and fluid flow problems. The solution procedure is represented for a Poisson reformulated general transport equation in terms of a-symmetric, symmetric and modified (double consideration of the boundary nodes) collocation approaches. In continuation, specifics of a primitive variable solution procedure for the coupled mass, momentum, and energy transport representing the natural convection in an incompressible Newtonian Bussinesq fluid are elaborated. A comparison of different collocation strategies is performed based on the two dimensional De Vahl Davis steady More >

P. A. C. Porto¹, A. B. Jorge¹, G. O. Ribeiro²

CMES-Computer Modeling in Engineering & Sciences, Vol.10, No.1, pp. 65-78, 2005, DOI:10.3970/cmes.2005.010.065

Abstract This work deals with a numerical solution technique for the self-regular gradient form of Green's identity, the flux boundary integral equation (flux-BIE). The required C^1,α inter-element continuity conditions for the potential derivatives are imposed in the boundary element method (BEM) code through a non-symmetric variational formulation. In spite of using Lagrangian C⁰ elements, accurate numerical results were obtained when applied to heat transfer problems with singular or quasi-singular conditions, like boundary points and interior points which may be arbitrarily close to the boundary. The numerical examples proposed show that the developed algorithm based on the self-regular More >

Julieta António^1,2, António Tadeu², Luís Godinho², Nuno Simões²

CMC-Computers, Materials & Continua, Vol.2, No.1, pp. 1-12, 2005, DOI:10.3970/cmc.2005.002.001

Abstract The evaluation of heat propagation in the time domain generated by transient heat sources placed in the presence of three-dimensional media requires the use of computationally demanding numerical schemes. The implementation of numerical 3D solutions may benefit from the existence of benchmark solutions to test the accuracy of approximate schemes.
With this purpose inmind, this article presents analyticalnumerical solutions to evaluate the heat-field elicited by monopole heat sources in the presence of three different inclusions, namely, a cylindrical circular solid inclusion, a cylindrical circular cavity with null fluxes and a cavity with null temperatures prescribed along… More >

B. Mochnacki¹, E. Majchrzak²

CMES-Computer Modeling in Engineering & Sciences, Vol.4, No.3&4, pp. 431-438, 2003, DOI:10.3970/cmes.2003.004.431

Abstract In the paper the analysis of transient temperature field in the domain of biological tissue subjected to an external heat source is presented. Because of the geometrical features of the skin the heat exchange in domain considered is assumed to be one-dimensional. The thermophysical parameters of successive skin layers (dermis, epidermis and sub-cutaneous region) are different, at the same time in sub-domains of dermis and sub-cutaneous region the internal heat sources resulting from blood perfusion are taken into account. The degree of the skin burn results from the value of the so-called Henriques integrals. The More >