Jun Chen^{1, *}, Rao Hu², Xianfeng Guo³, Feng Wu²

CMES-Computer Modeling in Engineering & Sciences, Vol.123, No.2, pp. 647-660, 2020, DOI:10.32604/cmes.2020.09180 - 01 May 2020

Abstract Underground pipeline networks constitute a major component of urban infrastructure, and thus, it is imperative to have an efficient mechanism to manage them. This study introduces a secondary development system to efficiently model underground pipeline networks, using the building information modeling (BIM)-based software Revit. The system comprises separate pipe point and tubulation models. Using a Revit application programming interface (API), the spatial position and attribute data of the pipe points are extracted from a pipeline database, and the corresponding tubulation data are extracted from a tubulation database. Using the Family class in Revit API, the More >

Gerardo Montelongo-Ruíz¹, Yolanda del Rocio Moreno-Ramírez¹, María Cruz Juárez-Aragón¹, Nohemí Niño-García², Reyna Ivonne Torres-Acosta², Torres-Castillo Jorge Ariel^1,*

Phyton-International Journal of Experimental Botany, Vol.89, No.2, pp. 361-373, 2020, DOI:10.32604/phyton.2020.08499 - 22 April 2020

Abstract This work aims to determine the phytochemical characterization of the pericarp of Chamaedorea radicalis Mart. fruit as a non-timber product with potential to obtain phytochemicals with potential applications in the industry. Fruit from C. radicalis were grouped in four ripening stages named as S1, S2, S3 and S4, according to maturity; S1 the most unripe stage and S4 the completely ripe stage. Determinations of total phenolic compounds, free radical scavenging activities and total flavonoid contents using spectrophotometric methods were done. Also, the tentative identification of phytochemicals during fruit ripening was done using UPLC-MS-MS. Total phenolic compound (TPC)… More >

Xiaoya Feng^{1, 2}, Wei Luo^{1, 2, *}, Yu Lei³, Yubin Su⁴, Zhigang Fang³

FDMP-Fluid Dynamics & Materials Processing, Vol.16, No.2, pp. 339-358, 2020, DOI:10.32604/fdmp.2020.08564 - 21 April 2020

Abstract Gas-liquid two-phase flow is ubiquitous in the process of oil and gas exploitation, gathering and transportation. Flow pattern, liquid holdup and pressure drop are important parameters in the process of gas-liquid two-phase flow, which are closely related to the smooth passage of the two-phase fluid in the pipe section. Although Mukherjee, Barnea and others have studied the conventional viscous gas-liquid two-phase flow for a long time at home and abroad, the overall experimental scope is not comprehensive enough and the early experimental conditions are limited. Therefore, there is still a lack of systematic experimental research… More >

Ping Yu^{1, *}, Chuanhui Huang¹, Lei Liu¹, Huafeng Guo¹, Chengqiang Liu¹

FDMP-Fluid Dynamics & Materials Processing, Vol.16, No.2, pp. 267-280, 2020, DOI:10.32604/fdmp.2020.06528 - 21 April 2020

Abstract To study the heat and mass transfer characteristics of alkali metals in a combined porous wick in high-temperature heat pipes, a three-dimensional (3-D) numerical model is constructed by using the finite volume method, Darcy’s theory, and the theory of local thermal equilibrium. The research finds that the pressure drop of fluids flowing through a combined porous wick exhibits an increasing trend with increasing flow velocity at the inlet and with decreasing permeability of the porous media; a combined porous wick of lower porosity and permeability and larger fluid velocity at the inlet is found to More >

Wei Liu^{1, 2, *}, Zhaoyang Song², Yunchang Wang²

CMES-Computer Modeling in Engineering & Sciences, Vol.123, No.1, pp. 257-282, 2020, DOI:10.32604/cmes.2020.07220 - 01 April 2020

Abstract Seismic analysis of buried pipes has been one study focus during the last decades, but the systematic seismic research of pipe connections, especially its relationship with the connected straight pipe, is nearly blank. On the basis, the influence of pipe connections on the joint deformations (JDs) of buried segmented pipes is analyzed in detail by considering different parameters, namely, connection shapes, ground conditions, pipe diameters, branch angles, seismic incident angles, and input ground motions. Moreover, an influence coefficient, which measures the influence of pipe connections on pipe JDs, is calculated. Results show that pipe connections More >

Omid Mahdi Ebadati E.^{1, *}, Farshad Eshghi², Amin Zamani¹

CMES-Computer Modeling in Engineering & Sciences, Vol.122, No.1, pp. 323-349, 2020, DOI:10.32604/cmes.2020.08079 - 01 January 2020

Abstract Transmission pipelines are vulnerable to various accidents and acts of vandalism. Therefore, a reliable monitoring system is needed to secure the transmission pipelines. A wireless sensor network is a wireless network consisting of distributed devices distributed at various distances, which monitors the physical and environmental conditions using sensors. Wireless sensor networks have many uses, including the built-in sensor on the outside of the pipeline or installed to support bridge structures, robotics, healthcare, environmental monitoring, etc. Wireless Sensor networks could be used to monitor the temperature, pressure, leak detection and sabotage of transmission lines. Wireless sensor… More >

Zhongmin Xiao¹, Wengang Zhang², Yanmei Zhang^{1, *}, Mu Fan³

CMC-Computers, Materials & Continua, Vol.62, No.1, pp. 267-280, 2020, DOI:10.32604/cmc.2020.06567

Abstract Fluctuated loadings from currents, waves and sea ground motions are observed on offshore steel pipelines, and they will result in small cracks to propagate continuously and cause unexpected damage to offshore/geotechnical infrastructures. In spite of the availability of efficient techniques and high-power computers for solving crack problems, investigations on the fatigue life of offshore pipelines with 3D interacting cracks are still rarely found in open literature. In the current study, systematic numerical investigations are performed on fatigue crack growth behaviours of offshore pipelines containing coplanar and non-coplanar cracks. Extended finite element method (XFEM) is adopted More >

Rongge Xiao^a , Yue Zhu^b,*, Wenbo Jin^a , Zheng Dai^a , Shifang Li^a , Fan Zhang^c

Frontiers in Heat and Mass Transfer, Vol.12, pp. 1-6, 2019, DOI:10.5098/hmt.12.28

Abstract In order to accurately obtain the wax deposition rate model, according to the kinetic principle of wax deposition, several factors affecting the wax deposition rate were selected, and by a optimization software of First Optimization(1stOpt), The parameters of two typical wax deposition rate models are solved respectively based on optimization algorithm combined by Levenberg-Marquardt (L-M) algorithm and global optimization and the calculated data were compared. The results show that: compared with the model parameters obtained by least squares method, the model parameters obtained by this optimization algorithm can describe the variation of wax deposition rate… More >

Brenton S. Taft^a,*, Kevin W. Irick^b

Frontiers in Heat and Mass Transfer, Vol.12, pp. 1-7, 2019, DOI:10.5098/hmt.12.24

Abstract On September 7th, 2017 the U.S. Air Force Research Laboratory launched the second Advanced Structurally Embedded Thermal Spreader (ASETSII) flight experiment to space on Orbital Test Vehicle 5. The ASETS-II experiment is made of three low-mass, low-cost oscillating heat pipes (OHPs) and an electronics/experiment control box. The three primary science objectives of the experiment are to measure the initial on-orbit thermal performance, to measure long duration thermal performance, and to assess any lifetime degradation. The three OHPs on ASETS-II are of varying configuration (center heating with single- and double-sided cooling) and working fluids (butane and… More >

Mohammed Yunus^*, Mohammad S. Alsoufi

Frontiers in Heat and Mass Transfer, Vol.12, pp. 1-8, 2019, DOI:10.5098/hmt.12.11

Abstract Swift cooling systems, improved microprocessor chips, processors’ performance and power usage have increased production of an enormous amount of heat and high operating temperatures due to excess heat flux density in the field of microelectronics. A rapid cooling of electronic circuits and heat dissipation for the same size of pipe with the present technology as nano size circuits critically generate high heat flux beyond 100 W/cm2 is currently the challenging task with which we are presented. Cooling in the form of heat transfer should be managed using both thermal conductivity (evaporation) and phase transition (condensation)… More >