Tiantian Yu¹, Youping Lv¹, Hao Zhong², Ming Liu¹, Pingyuan Gai¹, Zeju Jiang¹, Peng Zhang¹, Xingkai Zhang^2,*

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.8, pp. 1759-1772, 2024, DOI:10.32604/fdmp.2024.049035 - 06 August 2024

Abstract A new measurement device, consisting of swirling blades and capsule-shaped throttling elements, is proposed in this study to eliminate typical measurement errors caused by complex flow patterns in gas-liquid flow. The swirling blades are used to transform the complex flow pattern into a forced annular flow. Drawing on the research of existing blockage flow meters and also exploiting the single-phase flow measurement theory, a formula is introduced to measure the phase-separated flow of gas and liquid. The formula requires the pressure ratio, Lockhart-Martinelli number (L-M number), and the gas phase Froude number. The unknown parameters More >

Aleksandr Poluyanov^*, Ilya Kolesnichenko

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.7, pp. 1553-1563, 2024, DOI:10.32604/fdmp.2024.050165 - 23 July 2024

Abstract The article presents an experimental study on the flow of an eutectic gallium alloy in a cylindrical cell, which is placed in an alternating magnetic field. The magnetic field is generated by a coil connected to an alternating current source. The coil is located at a fixed height in such a way that its plane is perpendicular to the gravity vector, which in turn is parallel to the axis of the cylinder. The position of the cylinder can vary in height with respect to the coil. The forced flow of the considered electrically conductive liquid… More > Graphic Abstract

Ivan Karpunin^*

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.6, pp. 1219-1232, 2024, DOI:10.32604/fdmp.2024.051062 - 27 June 2024

Abstract The dynamics of a solid spherical body in an oscillating liquid flow in a vertical axisymmetric channel of variable cross section is experimentally studied. It is shown that the oscillating liquid leads to the generation of intense averaged flows in each of the channel segments. The intensity and direction of these flows depend on the dimensionless oscillating frequency. In the region of studied frequencies, the dynamics of the considered body is examined when the primary vortices emerging in the flow occupy the whole region in each segment. For a fixed frequency, an increase in the… More >

Lihui Ma^1,*, Zhuo Han¹, Wei Li¹, Guangfeng Qi¹, Ran Cheng², Yuanyuan Wang¹, Xiangran Mi³, Xiaohan Zhang¹, Yunfei Li¹

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.6, pp. 1381-1392, 2024, DOI:10.32604/fdmp.2024.046405 - 27 June 2024

Abstract When a gas-liquid two-phase flow (GLTPF) enters a parallel separator through a T-junction, it generally splits unevenly. This phenomenon can seriously affect the operation efficiency and safety of the equipment located downstream. In order to investigate these aspects and, more specifically, the so-called bias phenomenon (all gas and liquid flowing to one pipe, while the other pipe is a liquid column that fluctuates up and down), laboratory experiments were carried out by using a T-junction connected to two parallel vertical pipes. Moreover, a GLTPF prediction model based on the principle of minimum potential energy was… More >

Xiaochu Luo¹, Xiaobing Qi², Zhao Luo³, Zhonghao Li⁴, Ruiquan Liao¹, Xingkai Zhang^1,*

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.6, pp. 1233-1249, 2024, DOI:10.32604/fdmp.2023.045737 - 27 June 2024

Abstract Conventional conductivity methods for measuring the void fraction in gas-liquid multiphase systems are typically affected by accuracy problems due to the presence of fluid flow and salinity. This study presents a novel approach for determining the void fraction based on a reciprocating dynamic conductivity probe used to measure the liquid film thickness under forced annular-flow conditions. The measurement system comprises a cyclone, a conductivity probe, a probe reciprocating device, and a data acquisition and processing system. This method ensures that the flow pattern is adjusted to a forced annular flow, thereby minimizing the influence of More >

Teng Teng^1,2, Yuhe Cai³, Linchao Wang^3,*, Yanzhao Zhu²

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.6, pp. 1181-1202, 2024, DOI:10.32604/fdmp.2023.044532 - 27 June 2024

Abstract Liquid nitrogen has shown excellent performances as a good fracturing medium in the extraction of unconventional natural gas, and its application in coalbed methane extraction is currently a research hotspot. This study focuses on the acoustic emission properties of coal specimens treated utilizing liquid nitrogen with varying initial temperatures in a three-point bending environment. Through examination of the load-displacement curves of the considered coal samples, their mechanical properties are also revealed for different initial temperatures and cycling frequencies. The findings demonstrate a gradual decline in the maximum load capacity of coal rock as the temperature… More >

Dongwei Wang^1,*, Lijian Cao¹, Weidong Wang², Jiajun Hu¹

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.5, pp. 1103-1122, 2024, DOI:10.32604/fdmp.2023.042654 - 07 June 2024

Abstract A self-priming pump is a centrifugal pump that has the ability to prime itself. Typically, its performance depends on the configuration of its reflux hole. In this study, the ANSYS FLUENT software is used to investigate the effects of three different radial positions of the reflux hole on gas-liquid two-phase distribution, pressure pulsation, and imp during self-priming. The research results indicate that: (1) The effective channel size for the reflux liquid to enter the volute varies depending on the location of the reflux hole. The effect of the impeller rotation on the reflux liquid becomes… More >

Yanqun Yu^1,*, Wenhao Xu¹, Yahui Huangfu¹, Jinhai Liu^1,2, Bensheng Wang¹, Kai Liu¹

Energy Engineering, Vol.121, No.6, pp. 1521-1533, 2024, DOI:10.32604/ee.2024.047986 - 21 May 2024

Abstract China’s unconventional gas fields have a large number of low-productivity and low-efficiency wells, many of which are located in remote and environmentally harsh mountainous areas. To address the long-term stable production of these gas wells, plunger-lift technology plays an important role. In order to fully understand and accurately grasp the drainage and gas production mechanisms of plunger-lift, a mechanical model of plunger-liquid column uplift in the plunger-lift process was established, focusing on conventional plunger-lift systems and representative wellbore configurations in the Linxing region. The operating casing pressure of the plunger-lift process and the calculation method… More >

Rui Zhang¹, Taixiang Chen¹, Zhenjiang Chen¹, Hao Chen¹, Xuekai Wei¹, Malik Kamran¹, Chunjie Li^1,2,*

Phyton-International Journal of Experimental Botany, Vol.93, No.3, pp. 567-580, 2024, DOI:10.32604/phyton.2024.047485 - 28 March 2024

Abstract In a greenhouse experiment, the effects of soil microorganisms and extracts of Achnatherum inebrians on the seed germination and seedling growth of Elymus nutans were studied. The results showed that both the extracts from aboveground and belowground parts of A. inebrians significantly inhibited the germination rate, germination potential, germination index, vigor index, seedling height, root length, and fresh weight of E. nutans, but increased malondialdehyde content, catalase, peroxidase and superoxide dismutase activity of E. nutans seedlings (p < 0.05). The allelopathy of aqueous extracts of the aboveground parts of A. inebrians was stronger than that of the precipitates. Aqueous extracts of the… More >

Victor Kozlov^1,*, Vladimir Saidakov¹, Nikolai Kozlov²

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.4, pp. 693-703, 2024, DOI:10.32604/fdmp.2024.048068 - 28 March 2024

Abstract The behavior of two immiscible low-viscosity liquids differing in density and viscosity in a vertical flat layer undergoing modulated rotation is experimentally studied. The layer has a circular axisymmetric boundary. In the absence of modulation of the rotation speed, the interphase boundary has the shape of a short axisymmetric cylinder. A new effect has been discovered, under the influence of rotation speed modulation, the interface takes on a new dynamic equilibrium state. A more viscous liquid covers the end boundaries of the layer in the form of thin films, which have the shape of round… More >