Tamara A. Al-Shurbaji¹, Khalid A. AlKaabneh², Issam Alhadid^3,*, Ra’ed Masa’deh⁴

Intelligent Automation & Soft Computing, Vol.31, No.2, pp. 971-985, 2022, DOI:10.32604/iasc.2022.019654 - 22 September 2021

Abstract Scale-Invariant Feature Transform is an image matching algorithm used to match objects of two images by extracting the feature points of target objects in each image. Scale-Invariant Feature Transform suffers from long processing time due to embedded calculations which reduces the overall speed of the technique. This research aims to enhance SIFT processing time by imbedding Chamfer Distance Algorithm to find the distance between image descriptors instead of using Euclidian Distance Algorithm used in SIFT. Chamfer Distance Algorithm requires less computational time than Euclidian Distance Algorithm because it selects the shortest path between any two More >

Ke Zhou^1,2, Haitao Li^1,2,*, Assima Dauletbek^1,2, Dong Yang^1,2, Zhenhua Xiong³, Rodolfo Lorenzo⁴, Kun Zhou⁵, Ileana Corbi⁶, Ottavia Corbi⁶

Journal of Renewable Materials, Vol.10, No.1, pp. 165-182, 2022, DOI:10.32604/jrm.2021.017223 - 27 July 2021

Abstract Eccentric compression tests on 15 chamfered laminated bamboo lumber (LBL) columns with a height ranging from 600 to 3000 mm were conducted in order to study the eccentric mechanical performance. The failure of all specimens was caused by the crack of bamboo fiber in the tensile region. When the ultimate strength was reached, except specimens with a height of 600 mm, all other specimens could bear large deformation, showing good ductility. The lateral displacements of the specimens under eccentric compression were approximately parabolic in the direction of column height. The ultimate bending moment of LBL… More >

Akhil Muthigi^1,2, Christopher P. Dall^1,2, Erin Hays^1,2, Ryan Hankins¹, Ross E. Krasnow², Jordan Alger^1,2

Canadian Journal of Urology, Vol.28, No.5, pp. 10858-10864, 2021

Abstract Introduction: Placement of coudé catheters, manual irrigation of urinary catheters, and management of continuous bladder irrigation (CBI) are routine interventions for which nurses often receive little or no formal education. In this study, our aim was to determine factors associated with higher comfort levels for these catheter-care techniques and to assess whether online instructional videos could be used to improve nursing comfort.
Materials and methods: Three 5-minute videos were created to demonstrate proper technique for coudé catheter placement, manual irrigation of a catheter, and management of CBI. An online module with pre- and post-video surveys was created… More >

Hussien Aziz Sahe^b,*, Ala'a Abbas Mahdi, Qusay Rasheed Al-amir

Frontiers in Heat and Mass Transfer, Vol.16, pp. 1-15, 2021, DOI:10.5098/hmt.16.9

Abstract In this study, indoor air quality and thermal comfort were investigated for two persons sitting inside an office room of dimensions (3×2.5×2.5m). The office room is equipped with personal ventilation systems positioned 50 cm from the person's face. These systems are characterized by the ability to change the rates of airflow (ATD). Experimental studies and results were conducted on a thermal manikin that simulates the human body in a sitting position, and the results are compared with CFD analysis using the k-epsilon and the RNG turbulent models. The experimental study focused on measuring the speed… More >

Ali Askari¹, Ali Salehi Sahl Abadi^2,*, Alimardan Alinia³, Milad Pourjaafar⁴, Aref Honairi Haghighi⁵, Elham Akhlaghi Pirposhteh⁶

Sound & Vibration, Vol.55, No.4, pp. 329-341, 2021, DOI:10.32604/sv.2021.016662 - 18 October 2021

Abstract Among the harmful occupational factors, noise is the most common exposure in the oil industrial workplaces. The present study aimed to prioritize sound pollution areas in central processing facilities (CPF) of an oil field in order to provide corrective action in the studied industry and similar industries. After reviewing the issued permit to work, job description and noise dosimetry test, the evaluated areas were selected then sound pressure levels in the referenced areas investigated according to ISO 9612–2009 (E) next the noise map prepared for all selected areas. For identifying the prioritized areas to implement… More >

Tayyebeh Yazarlou^*, Mohammad Djavad Saghafi

Energy Engineering, Vol.118, No.6, pp. 1783-1797, 2021, DOI:10.32604/EE.2021.017282 - 10 September 2021

Abstract The room's plan shape, the area of the window, and the impact of the materials are significant parameters in determining the thermal needs of buildings. In traditional houses of the hot and dry climate of Iran, the plan shape of the room, the ratio of the window area to the floor area, and the comparison between traditional and prevalent materials have been less studied. This study investigated the thermal performance of seven different models of the plan shape, five different ratios of window area to plan area, and three material structures in a selected room… More >

Ke Song^1,*, Paul Liu², Dongquan Liu³

CMES-Computer Modeling in Engineering & Sciences, Vol.128, No.3, pp. 1133-1150, 2021, DOI:10.32604/cmes.2021.016008 - 11 August 2021

Abstract A novel beamforming algorithm named Delay Multiply and Sum (DMAS), which excels at enhancing the resolution and contrast of ultrasonic image, has recently been proposed. However, there are nested loops in this algorithm, so the calculation complexity is higher compared to the Delay and Sum (DAS) beamformer which is widely used in industry. Thus, we proposed a simple vector-based method to lower its complexity. The key point is to transform the nested loops into several vector operations, which can be efficiently implemented on many parallel platforms, such as Graphics Processing Units (GPUs), and multi-core Central… More >

Vibhushit Gupta¹, Shubham K. Verma², Sanjeev Anand², Navin Gupta³, Yatheshth Anand^1,*

Energy Engineering, Vol.118, No.5, pp. 1317-1331, 2021, DOI:10.32604/EE.2021.016732 - 16 July 2021

Abstract The utilization of energy in building sectors comprises 30–40% of the entire global energy consumption. Most of the energy is being utilized for cooling & heating the buildings. These cooling and heating depend on the nature of climate for different places. In this, the detailed analysis of the building envelope across five areas (viz. Srinagar, Jaisalmer, New Delhi, Thiruvananthapuram and Bangalore) representing different climatic zones had been carried out. Simulations are performed for these locations using eQUEST and ANSYS software. Three of the result output from the eQUEST simulation are used to assess the different… More >

Pengcheng Liu, Ping Xiang, Qishi Zhou^*, Hai Zhang, Jiefu Tian, Misganu Demis Argaw

Journal of Renewable Materials, Vol.9, No.12, pp. 2223-2239, 2021, DOI:10.32604/jrm.2021.015544 - 22 June 2021

Abstract Bamboo is a renewable natural building material with good mechanical properties. However, due to the heterogeneity and anisotropy of bamboo stalk, a large amount of material performance testing costs are required in engineering applications. In this work, longitudinal compression, bending, longitudinal shear, longitudinal tensile, transverse compression and transverse tensile tests of bamboo materials are conducted, considering the influence of the bamboo nodes. The mechanical properties of the whole bamboo stalk with the wall thickness and outer circumference are explored. Through univariate and multiple regression analysis, the relationship between mechanical properties and wall thickness and perimeter More > Graphic Abstract

Samer Alabed¹, Ibrahim Mahariq^1,*, Mohammad Salman¹, Mustafa Kuzuoglu²

CMC-Computers, Materials & Continua, Vol.69, No.1, pp. 575-588, 2021, DOI:10.32604/cmc.2021.018245 - 04 June 2021

Abstract In this article, a low-cost electromagnetic structure emulating photonic nanojets is utilized to improve the efficiency of wireless relay networks. The spectral element method, due to its high accuracy, is used to verify the efficiency of the proposed structure by solving the associate field distribution. The application of optimal single-relay selection method shows that full diversity gain with low complexity can be achieved. In this paper, the proposed technique using smart relays combines the aforementioned two methods to attain the benefits of both methods by achieving the highest coding and diversity gain and enhances the More >