F. Auricchio¹, L. Petrini², R. Pietrabissa³, E. Sacco⁴

CMES-Computer Modeling in Engineering & Sciences, Vol.4, No.3&4, pp. 365-380, 2003, DOI:10.3970/cmes.2003.004.365

Abstract Since 80’s many devices were developed to exploit the unique blend of mechanical and biocompatibility properties of shape memory alloys in orthodontic applications. It results in a high clinical effectiveness, but also in a spreading of technical knowledge on the properties of the single appliances. The goal of the present contribution is to contrast this sense of bewilderness and to prepare the basis for a simulationtool able to support the orthodontist choice. In particular a finite-element beam with a one-dimensional constitutive law, able to describe the SMA super elasticity and shape memory effect, is presented: More >

I. J. Rao¹, J.D. Humphrey², K.R. Rajagopal³

CMES-Computer Modeling in Engineering & Sciences, Vol.4, No.3&4, pp. 439-456, 2003, DOI:10.3970/cmes.2003.004.439

Abstract Recent discoveries in molecular and cell biology reveal that many cell types sense and respond (via altered gene expression) to changes in their mechanical environment. Such mechanotransduction mechanisms are responsible for many changes in structure and function, including the growth and remodeling process. To understand better, and ultimately to use (e.g., in tissue engineering), biological growth and remodeling, there is a need for mathematical models that have predictive and not just descriptive capability. In contrast to prior models based on reaction-diffusion equations or the concept of volumetric growth, we examine here a newly proposed constrained More >

K.J. Fischer^1,2, J.A. Bastidas³, H.J. Pfaeffle², J.D. Towers²

CMES-Computer Modeling in Engineering & Sciences, Vol.4, No.3&4, pp. 397-404, 2003, DOI:10.3970/cmes.2003.004.397

Abstract The two bones of the forearm, the radius and the ulna, have been shown to bear different proportions of the overall forearm load at the wrist and the elbow. This biomechanical data suggests load transfer between the bones occurs through the soft tissues of the forearm. Load transfer from radius to ulna through passive soft tissues such as the interosseous ligament (IOL) has been experimentally measured. Ex vivo studies of the forearm, however, cannot account for the effect of internal loads generated by the muscles and, in some cases, external forces acting directly on the… More >

Leone Corradi¹, Francesco Genna²

CMES-Computer Modeling in Engineering & Sciences, Vol.4, No.3&4, pp. 381-396, 2003, DOI:10.3970/cmes.2003.004.381

Abstract A critical comparison of several Finite Element models is presented, with reference to the analysis of the stress and strain states around a tooth or a fixed dental implant. Such an analysis, if performed on a full, three-dimensional geometry of the jaw-tooth/dental implant system, requires significant computational resources, and it is therefore often done on simplified models, whose validity can be questionable. On the other side, the use of simplified models is adequate --- almost mandatory --- when detailed results are needed, or when geometrical and material nonlinearities, as well as other complicating factors, are… More >

Eugene J. Alexander¹, Christoph Bregler², Thomas P. Andriacchi³

CMES-Computer Modeling in Engineering & Sciences, Vol.4, No.3&4, pp. 351-364, 2003, DOI:10.3970/cmes.2003.004.351

Abstract A necessary requirement for many musculoskeletal modeling tasks is an estimation of skeletal motion from observations of the surface of a body segment. The skeletal motion may be used directly for inverse kinematic calculations or as an observation sequence for forward dynamic simulations. This paper describes a fundamentally new approach to human motion capture for biomechanical analysis. Techniques for generating three-dimensional models of human skeletal elements from magnetic resonance imaging data are described, along with a methodology for corresponding these high-resolution internal models to externally observable features. A system for generating dynamic visualizations of these More >

E. Ferretti¹

CMES-Computer Modeling in Engineering & Sciences, Vol.4, No.1, pp. 51-72, 2003, DOI:10.3970/cmes.2003.004.051

Abstract A numerical code for modeling crack propagation using the cell method is proposed. The Mohr-Coulomb criterion is used to compute the direction of crack propagation, and the new crack geometry is realized by an intra-element propagation technique. Automatic remeshing is then activated. Applications in Mode I and Mixed Mode are presented to illustrate the robustness of the implementation. More >

D.W. Brenner, O.A. Shenderova, D.A. Areshkin, J.D. Schall¹, S.-J. V. Frankland²

CMES-Computer Modeling in Engineering & Sciences, Vol.3, No.5, pp. 643-674, 2002, DOI:10.3970/cmes.2002.003.643

Abstract The derivation of a bond-order potential energy function and a self-consistent tight-binding scheme is presented, followed by a survey of the application of these methods to calculating properties of carbon nanostructures. The modeling studies discussed include properties of functionalized and kinked carbon nanotubes, Raman shifts for hydrogen stored in nanotubes, nanotubes in a composite, properties of nanotubes in applied potential (electrical) fields, and structures and properties of nanocones, nanodiamond clusters and rods, and hybrid diamond-nanotube structures. More >

Leonid V. Zhigilei¹, Avinash M. Dongare¹

CMES-Computer Modeling in Engineering & Sciences, Vol.3, No.5, pp. 539-556, 2002, DOI:10.3970/cmes.2002.003.539

Abstract Computational modeling has a potential of making an important contribution to the advancement of laser-driven methods in nanotechnology. In this paper we discuss two computational schemes developed for simulation of laser coupling to organic materials and metals and present a multiscale model for laser ablation and cluster deposition of nanostructured materials. In the multiscale model the initial stage of laser ablation is reproduced by the classical molecular dynamics (MD) method. For organic materials, the breathing sphere model is used to simulate the primary laser excitations and the vibrational relaxation of excited molecules. For metals, the… More >

A. M. Rajendran¹, D. J. Grove²

CMES-Computer Modeling in Engineering & Sciences, Vol.3, No.3, pp. 367-380, 2002, DOI:10.3970/cmes.2002.003.367

Abstract This paper presents detailed computational analyses investigating the ability of constitutive relationships to describe the response of a 99.5% pure alumina (AD995) subjected to a wide range of stress/strain loading states. Using a shock-wave-propagation-based finite element code, one and two-dimensional simulations were performed for the following shock and impact configurations: plate-on-plate impact; rod-on-rod impact; single-density plate-on-rod impact; graded-density plate-on-rod impact; and rod penetration into a thick plate. The detailed analyses presented in this paper include a model constant sensitivity study through comparisons of computed wave profiles with experimental measurements. More >

E.Y.K. Ng¹, S.T. Poh ²

CMES-Computer Modeling in Engineering & Sciences, Vol.3, No.3, pp. 351-366, 2002, DOI:10.3970/cmes.2002.003.351

Abstract Advances in microfabrication technology have allowed the use of microchannels in ultra compact, very efficient heat exchangers, which capitalize on the channels large surface area to volume ratio, to transport high heat fluxes with small thermal resistances. One example is the cooling of microchips. However, research into microscale flow and heat transfer phenomena conducted by various researchers provided substantial experimental data and considerable evidence that the behaviour of fluid flow and heat transfer in microchannels without phase change may be different than that which normally occurs in larger more conventional sized channels.
This paper describes… More >