F. Gant¹, L. Champaney¹, Ph. Rouch¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.14, No.3, pp. 97-98, 2010, DOI:10.3970/icces.2010.014.097

Abstract Widely used in aeronautics, bolted and riveted joints are subject to high and various loads during flight. The design of such elements is quite a challenge because of their large number and uncertain nonlinear behavior. Indeed, the control of joint properties such as bolt pretension, bolt hole clearance, and friction during manufacturing processes is an issue.
Engineering design uses a factor of safety (FoS) to quantify uncertainties, which often leads to an oversized structure. Here, the aim is to model uncertainty effects on quantities of interest in order to redefine a more accurate FoS that could… More >

X.-H. Chen¹, Y.-W. Mai²

The International Conference on Computational & Experimental Engineering and Sciences, Vol.14, No.2, pp. 43-50, 2010, DOI:10.3970/icces.2010.014.043

Abstract A general elastoplastic fracture mechanics theory is proposed for applying the Essential-Work-of-Fracture (EWF) Method to quasi-static and impact toughness characterization. Advanced finite element modeling is developed to simulate the EWF Method using the crack-tip opening angle criterion (CTOA) and the constitutive relation of the material under consideration. For Poly(ethylene-terephlate) (PET) films, the load-displacement curves are calculated for the whole crack propagation process of deeply double-edge notched tensile specimens (DENT) with different ligament lengths so as to determine the total work, the essential work and the non-essential work of fracture. The effects of specimen gauge length More >

F.E. Mensah^∗,†, R. Sridhar^†, P. Misra^†

Molecular & Cellular Biomechanics, Vol.7, No.4, pp. 203-212, 2010, DOI:10.3970/mcb.2010.007.203

Abstract This work presents an overview of the use of liposomes for targeted delivery of photosensitizers to tumors for Photodynamic Therapy (PDT). It assesses the results of a quantitative model to explain the interaction of short-pulsed lasers (in the nanosecond and picosecond domains) with a liposome-dye complex in terms of a localized photo-induced thermal mechanism. Incorporation of an organic dye (sulforhodamine) within lipid vesicles has been investigated in conjunction with the effect of laser irradiation on the integrity of the liposome-dye complex. The variation of the absorption coefficient as a function of wavelength for dye-encapsulated liposomes More >

Xituan Shang^*, Michael R. T. Yen^1,†, M. Waleed Gaber^‡

Molecular & Cellular Biomechanics, Vol.7, No.2, pp. 93-104, 2010, DOI:10.3970/mcb.2010.007.093

Abstract The objective of this research is to conduct mechanical property studies of skin from two individual but potentially connected aspects. One is to determine the mechanical properties of the skin experimentally by biaxial tests, and the other is to use the finite element method to model the skin properties. Dynamic biaxial tests were performed on 16 pieces of abdominal skin specimen from rats. Typical biaxial stress-strain responses show that skin possesses anisotropy, nonlinearity and hysteresis. To describe the stress-strain relationship in forms of strain energy function, the material constants of each specimen were obtained and More >

He Gong^∗,†, Ming Zhang^‡

Molecular & Cellular Biomechanics, Vol.7, No.1, pp. 1-12, 2010, DOI:10.3970/mcb.2010.007.001

Abstract In mechanical disuse conditions associated with immobilization and microgravity in spaceflight, cortical endosteal surface moved outward with periosteal surface moving slightly or unchanged, resulting in reduction of cortical thickness. Reduced thickness of the shaft cortex of long bone can be considered as an independent predictor of fractures. Accordingly, it is important to study the remodeling process at cortical endosteal surface. This paper presents a computer simulation of cortical endosteal remodeling induced by mechanical disuse at the Basic Multicellular Units level with cortical thickness as controlling variables. The remodeling analysis was performed on a representative rectangular… More >

I. Smojver¹, D. Ivancevic¹, D. Mihaljevic²

CMES-Computer Modeling in Engineering & Sciences, Vol.70, No.2, pp. 191-216, 2010, DOI:10.3970/cmes.2010.070.191

Abstract This paper tackles the problem of numerical prediction of bird strike induced damage in real aeronautical structures using highly detailed finite element models and modern numerical approaches. Due to the complexity of today's aeronautical structures, numerical damage prediction methods have to be able to take into account various failure and degradation models of different materials. The work presented in this paper is focused on damage modeling in metallic items of aeronautical structures.
Abaqus/Explicit has been employed to perform geometrical and material nonlinear transient dynamic analyses. The problem of soft body impacts has been tackled by applying… More >

Wei-Xin Ren^1,2,3, Cong-Cong Su¹, Wang-Ji Yan¹

CMES-Computer Modeling in Engineering & Sciences, Vol.70, No.1, pp. 67-92, 2010, DOI:10.3970/cmes.2010.070.067

Abstract A beam-arch segment assembly procedure is presented in this paper for the dynamic modelling and analysis of arch bridges. Such a beam-arch segment assembly is composed of different structural elements of arch bridges such as arch ribs (curved beams), suspenders, girders and floor beams. Based on the energy principle in structural dynamics, the stiffness matrix and mass matrix of such an assembly are formulated. The proposed procedure is then implemented to carry out the free vibration analysis of the Jian concrete filled tubular arch bridge. It is demonstrated that the proposed beam-arch segment assembly procedure More >

Xianqiao Wang¹, James D. Lee²

CMES-Computer Modeling in Engineering & Sciences, Vol.69, No.3, pp. 199-222, 2010, DOI:10.3970/cmes.2010.069.199

Abstract This paper presents an atom-based continuum (ABC) method aiming at a seamless transition from the atomistic to the continuum description of multi-element crystalline solids (which has more than one kind of atom in the unit cell). Contrary to many concurrent multiscale approaches, ABC method is naturally suitable for the analysis of multi-element crystals within a finite element (FE) framework. Taking both efficiency and accuracy into account, we adopt a cluster-based summation rule for atomic force calculations in the FE formulations. Single-crystals MgO, BaTiO₃ and Cu under mechanical loading are modeled and simulated. With a coarse-grained mesh, More >

Yang Yang¹, Anil Misra²

CMES-Computer Modeling in Engineering & Sciences, Vol.64, No.1, pp. 1-36, 2010, DOI:10.3970/cmes.2010.064.001

Abstract Gradient theories have found wide applications in modeling of strain softening phenomena. This paper presents a higher order stress-strain theory to describe the damage behavior of strain softening materials. In contrast to most conventional gradient approaches for damage modeling, the present higher order theory considers strain gradients and their conjugate higher-order stress such that stable numerical solutions may be achieved. We have described the derivation of the required constitutive relationships, the governing equations and its weak form for this higher-order theory. The constitutive coefficients were obtained from a granular media approach such that the internal More >

Binxin Yang¹, Jie Ouyang¹, Tao Jiang¹, Chuntai Liu²

CMES-Computer Modeling in Engineering & Sciences, Vol.63, No.3, pp. 191-222, 2010, DOI:10.3970/cmes.2010.063.191

Abstract A gas-solid-liquid three-phase model is proposed for fiber reinforced composites mold filling process. The fluid flow is described in Eulerian coordinate while the dynamics of fibers is described in Langrangian coordinate. The interaction of fluid flow and fibers are enclosed in the model. The influence of fluid flow on fibers is described by the resultant forces imposed on fibers and the influence of fibers on fluid flow is described by the momentum exchange source term in the model. A finite volume method coupled with a level set method for viscoelastic-Newtonian fluid flow is used to More >