Chongyang Zhao, Wei Chai, Beibei Rui, Lin Chen^*

Energy Engineering, Vol.120, No.11, pp. 2683-2705, 2023, DOI:10.32604/ee.2023.029620 - 31 October 2023

Abstract At present, the direct drive permanent magnet synchronous generator (DD-PMSG) grid connected system based on virtual synchronous generator (VSG) control will experience power oscillation at sub synchronous frequencies. The mechanism and characteristics of this new type of sub-synchronous interaction (SSI) are not yet clear, and the system cannot recover to steady state solely based on the characteristics of VSG itself. Especially when connected to a weak current network, oscillations are more pronounced, affecting the stability of the system. In severe cases, the system may trigger shutdown protection and be disconnected from the network. Existing research More >

Sinuo Zhang¹, Daicong Da², Yingjun Wang^1,3,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.2, pp. 1-2, 2023, DOI:10.32604/icces.2023.09085

Abstract Topology optimization (TO) designs involving multiple materials suffer either difficult interface modeling or finding physically meaningful transition domains with an accurate structural representation. Simple interpolation approaches are usually used in multi-material designs to represent the overlapped regions of different materials, which cannot solve either of these problems. In this paper, a moving morphable component (MMC)-based TO is developed to overcome this issue by leveraging the triply periodic minimal surfaces (TPMS). The TMPS-based architecture will serve as the infilling microstructure to accurately represent the overlapped domains of different materials. A TPMS function interpolation scheme is used… More >

S. Dinesh Kumar^1,*, A. Jagadeeshwaran²

Intelligent Automation & Soft Computing, Vol.36, No.2, pp. 2201-2215, 2023, DOI:10.32604/iasc.2023.027467 - 05 January 2023

Abstract Recent advancements in power electronics technology evolves inverter fed electric motors. Speed signals and rotor position are essential for controlling an electric motor accurately. In this paper, the sensorless speed control of surface-mounted permanent magnet synchronous motor (SPMSM) has been attempted. SPMSM wants a digital inverter for its precise working. Hence, this study incorporates fifteen level inverter to the SPMSM. A sliding mode observer (SMO) based sensorless speed control scheme is projected to determine rotor spot and speed of the multilevel inverter (MLI) fed SPMSM. MLI has been operated using a multi carrier pulse width More >

Smarajit Ghosh^*

Computer Systems Science and Engineering, Vol.45, No.3, pp. 2391-2404, 2023, DOI:10.32604/csse.2023.028931 - 21 December 2022

Abstract In the field of fault tolerance estimation, the increasing attention in electrical motors is the fault detection and diagnosis. The tasks performed by these machines are progressively complex and the enhancements are likewise looked for in the field of fault diagnosis. It has now turned out to be essential to diagnose faults at their very inception; as unscheduled machine downtime can upset deadlines and cause heavy financial burden. In this paper, fault diagnosis and speed control of permanent magnet synchronous motor (PMSM) is proposed. Elman Neural Network (ENN) is used to diagnose the fault of… More >

Xiangfei Li, Yang Yin, Yang Zhou, Wenchang Liu, Kaihui Zhao^*

Energy Engineering, Vol.120, No.2, pp. 277-297, 2023, DOI:10.32604/ee.2023.022461 - 29 November 2022

Abstract This paper presents a novel non-singular fast terminal sliding mode control (NFTSMC) based on the deep flux weakening switching point tracking method in order to improve the control performance of permanent interior magnet synchronous motor (IPMSM) drive systems. The mathematical model of flux weakening (FW) control is established, and the deep flux weakening switching point is calculated accurately by analyzing the relationship between the torque curve and voltage decline curve. Next, a second-order NFTSMC is designed for the speed loop controller to ensure that the system converges to the equilibrium state in finite time. Then, More > Graphic Abstract

Shuai Zhou¹, Dazhi Wang^1,*, Mingtian Du², Ye Li¹, Shuo Cao³

CMC-Computers, Materials & Continua, Vol.74, No.2, pp. 3391-3404, 2023, DOI:10.32604/cmc.2023.033397 - 31 October 2022

Abstract The parameters of permanent magnet synchronous motor (PMSM) affect the performance of vector control servo system. Because of the complexity of nonlinear model of PMSM, it is very difficult to identify the parameters of PMSM. Aiming at the problems of large amount of data calculation, low identification accuracy and poor robustness in the process of multi parameter identification of permanent magnet synchronous motor, this paper proposes a weighted differential evolutionary particle swarm optimization algorithm based on double update strategy. By introducing adaptive judgment factor to control the proportion of weighted difference evolution (WDE) algorithm and… More >

Billel Meghni¹, Afaf Benamor², Oussama Hachana³, Ahmad Taher Azar^4,5,*, Amira Boulmaiz⁶, Salah Saad¹, El-Sayed M. El-kenawy^7,8, Nashwa Ahmad Kamal⁹, Suliman Mohamed Fati⁵, Naglaa K. Bahgaat¹⁰

CMC-Computers, Materials & Continua, Vol.74, No.2, pp. 3977-3996, 2023, DOI:10.32604/cmc.2023.029838 - 31 October 2022

Abstract The integration of wind turbines (WTs) in variable speed drive systems belongs to the main factors causing low stability in electrical networks. Therefore, in order to avoid this issue, WTs hybridization with a storage system is a mandatory. This paper investigates WT system operating at variable speed. The system contains of a permanent magnet synchronous generator (PMSG) supported by a battery storage system (BSS). To enhance the quality of active and reactive power injected into the network, direct power control (DPC) scheme utilizing space-vector modulation (SVM) technique based on proportional-integral (PI) control is proposed. Meanwhile, More >

R. Senthil Rama¹, C. R. Edwin Selva Rex², N. Herald Anantha Rufus^3,*, J. Annrose⁴

Intelligent Automation & Soft Computing, Vol.35, No.2, pp. 2325-2336, 2023, DOI:10.32604/iasc.2023.028930 - 19 July 2022

Abstract Any nonlinear behavior of the system is analyzed by a useful way of Total Harmonic Distortion (THD) technique. Reduced THD achieves lower peak current, higher efficiency and longer equipment life span. Simulated annealing (SA) is applied due to the effectiveness of locating solutions that are close to ideal and to challenge large-scale combinatorial optimization for Permanent Magnet Synchronous Machine (PMSM). The parameters of direct torque controllers (DTC) for the drive are automatically adjusted by the optimization algorithm. Advantages of the PI-Fuzzy-SA algorithm are retained when used together. It also improves the rate of system convergence. More >

R. S. Jothilakshmi^*, S. Chitra Selvi

Intelligent Automation & Soft Computing, Vol.34, No.2, pp. 865-876, 2022, DOI:10.32604/iasc.2022.025643 - 03 May 2022

Abstract The hybrid renewable energy harvesting and grid integration system has been proposed and validated in this work. The proposed system uses a Wind Energy Conversion System (WECS) and a Solar Photo Voltaic Energy Conversion System (SPVECS). The WECS uses Permanent Magnet Synchronous Generator (PMSG) driven by a wind turbine. The variable frequency and variable voltage output of PMSG is rectified by Diode Bridge Rectifier (DBR) and stepped up by Super Lift Luo Converter (SLLC 1), and finally, the harvested wind energy is delivered to the Direct Current (DC) link of a Distributed Static Synchronous Compensator More >

S. Kirubadevi^*, S. Sutha

Intelligent Automation & Soft Computing, Vol.34, No.2, pp. 895-910, 2022, DOI:10.32604/iasc.2022.025395 - 03 May 2022

Abstract Wind power conversion systems play a significant position in grid-coupled renewable source networks. In this paper, a permanent magnet based synchronous alternator type wind energy scheme is considered for analysis. The enhanced performance of wind power conversion could be reached by improving maximum power point tracking (MPPT) and by modernising the control circuit of the power electronic circuit. The main task is to enrich its performance level by proposing fuzzy gain scheduling (FGS) based optimal torque management for maximum power point tracking. In addition to the improved MPPT, this article analyses different topologies of direct More >