Mengyao Yan¹, Xianqi Zeng¹, Banghui Zhang¹, Hui Zhang², Di Tan¹, Binghua Cai¹, Shenchun Qu¹, Sanhong Wang^1,*

Phyton-International Journal of Experimental Botany, Vol.92, No.1, pp. 193-208, 2023, DOI:10.32604/phyton.2022.023078

Abstract The effect of soil nutrient content on fruit yield and fruit quality is very important. To explore the effect of soil nutrients on apple quality we investigated 200 fruit samples from 40 orchards in Feng County, Jiangsu Province. Soil mineral elements and fruit quality were measured. The effect of soil nutrient content on fruit quality was analyzed by artificial neural network (ANN) model. The results showed that the prediction accuracy was highest (R²= 0.851, 0.847, 0.885, 0.678 and 0.746) in mass per fruit (MPF), hardness (HB), soluble solids concentrations (SSC), titratable acid concentration (TA) and solid-acid ratio (SSC/TA), respectively. The sensitivity… More >

Yizhang Wang¹, Zhaoyang Yu¹, Jinbo Hu^1,2,*, Shanshan Chang¹, Yuan Liu¹, Ting Li², Gonggang Liu^1,*, Xiaodong (Alice) Wang³

Journal of Renewable Materials, Vol.11, No.1, pp. 147-165, 2023, DOI:10.32604/jrm.2023.021306

Abstract In this paper, the residue from bamboo factory has been used to design photo-Fenton catalyst, which has the advantages of low cost and magnetic recycling. The photo-Fenton catalytic performance of the biocarbon-based catalyst was excellent and its optimal preparation process was also explored by response surface methodology. First, bamboo-carbon fiber was selected as the photo-Fenton catalyst carrier. Subsequently, the surface of the carbon fiber was modified, with which dopamine, nano-Fe₃O₄ and nano-TiO₂ were successively loaded by hydrothermal method. After examined single factor tests, four factors including dopamine concentration, ferric chloride mass, P25 titanium dioxide mass and liquid-solid ratio were selected… More > Graphic Abstract

Shuai Wang, Zhihong Yu^*, Wenjie Zhang, Dongxu Zhao, Aorigele

Phyton-International Journal of Experimental Botany, Vol.91, No.11, pp. 2559-2582, 2022, DOI:10.32604/phyton.2022.021354

Abstract

Sunflower (Helianthus annuus L.) is one of the four major oil crops in the world and has high economic value. However, the lack of discrete element method (DEM) models and parameters for sunflower seeds hinders the application of DEM for computer simulation in the key working processes of sunflower seed sowing and harvesting. The present study was conducted on two varieties of sunflower, and the DEM model of sunflower seeds was established by using 3D scanning technology based on the distribution of triaxial dimensions and volumes of the geometric model of sunflower seeds. Similarly, the physical characteristics parameters of sunflower… More >

Guanfeng Chang, Xinzhu Hua^*, Xiao Liu, Chen Li, Enqian Wang, Bingjun Sun

Journal of Renewable Materials, Vol.10, No.5, pp. 1439-1458, 2022, DOI:10.32604/jrm.2022.018607

Abstract The filling mining method is important in realizing the green mining of mineral resources. Aiming at the problems of land resource occupation, environmental pollution, and rational utilization of coal-based solid wastes such as coal gangue, fly ash, and desulfurization gypsum, a new paste filling material was developed with coal gangue, fly ash, and desulfurization gypsum as raw materials. The microstructure of the raw materials was analyzed by XRD and SEM. Combined with the Box-Behnken experimental design, the effect of each component on the fluidity of the filling slurry was analyzed through the response surface analysis. The significance of each component… More > Graphic Abstract

J. Kananathan^1,2, M. Samykano^2,*, K. Kadirgama³, D. Ramasamy², M. M. Rahman²

Energy Engineering, Vol.118, No.5, pp. 1305-1315, 2021, DOI:10.32604/EE.2021.016131

Abstract Fused deposition modeling (FDM)-3D printing has been the favored technology to build functional components in various industries. The present study investigates infill percentage and infill pattern effects on the printed parts’ impact properties through the 3D printing technique using coconut wood-filled PLA composites. Mathematical models are also proposed in the present study with the aim for future property prediction. According to the ASTM standard, fifteen specimens with different parameter combinations were printed using a low-cost FDM 3D printer to evaluate their impact properties. Statistical analysis was performed using MINITAB to validate the experimental data and model development. The experimental outcomes… More >

Yueqiang Yu¹, Suling Wang^1,*, Minzheng Jiang¹, Yanling Guo^2,3, Ting Jiang^1,*

Journal of Renewable Materials, Vol.9, No.2, pp. 351-364, 2021, DOI:10.32604/jrm.2021.012885

Abstract In order to enhance the strength of sustainable walnut shell/Co-PES (WSPC) sintered parts, wax-filtrated post-treatment was carried out. The effects of treating fluid temperature, preheating time and immersion time on the bending strength of WSPC wax-filtrated parts were analyzed by single factor analysis method. To obtain an accurate model for predicting the bending strength of the WSPC wax-filtrated part, the experiments were involved by using Box-Behnken design (BBD). Main parameters, such as treating fluid temperature, preheating time and immersion time, and their interactive effects were analyzed through analysis of variance (ANOVA) and graphical contours. The results demonstrated that all parameters’… More >

Ting Jiang^1,3, Chunmei Yang^1,2,*, Yueqiang Yu³, Bakary S. Doumbia^1,2, Jiuqing Liu^1,*, Yan Ma^1,2

Journal of Renewable Materials, Vol.9, No.1, pp. 119-128, 2021, DOI:10.32604/jrm.2021.011490

Abstract

As a natural and environmentally friendly renewable material, Northeast China ash wood (NCAW) (Fraxinus mandshurica Rupr.) was cut by water-jet assisted CO₂ laser (WACL), the surface quality was evaluated by surface roughness of cut section. The surface roughness was measured by three-dimensional (3D) profilometry. Furthermore, the micromorphology of machined surface was observed by scanning electronic microscopy (SEM). Carbon content changes of machined surface were measured by energy dispersive spectrometer (EDS). A relationship between surface roughness and cutting parameters was established using response surface methodology (RSM). It is concluded that the cutting speed, laser power and water pressure played an important… More >

Dingbang Zhang¹, Yi Zhang^2,*, Zhiguo Cao³, Tao Cheng¹

Journal of Renewable Materials, Vol.8, No.11, pp. 1391-1409, 2020, DOI:10.32604/jrm.2020.012695

Abstract In this paper, roots and copper slag were used to overcome the weak- ness and reinforce the mechanical property of soft soil. The experiments were designed by the Response Surface Method (RSM), the content optimizing of the root permeated copper slag mixed soil for achieving appropriate values of shear strength and the final results evaluating were also conducted by RSM. Four independent variables including moisture content (12–21% by dry weight of the mixture), slag content (10–20% by dry weight of the mixture), roots content (0–1.1% by dry weight of the mixture), and aspect ratio of roots L/d (5–40) were studied… More >

Haitao Yue¹, Chenguang Guo^1,*, Qiang Li¹, Lijuan Zhao¹, Guangbo Hao²

CMES-Computer Modeling in Engineering & Sciences, Vol.124, No.3, pp. 937-952, 2020, DOI:10.32604/cmes.2020.010565

Abstract To improve the milling surface quality of the Al-Li alloy thin-wall workpieces and reduce the cutting energy consumption. Experimental research on the milling processing of AA2195 Al-Li alloy thin-wall workpieces based on Response Surface Methodology was carried out. The single factor and interaction of milling parameters on surface roughness and specific cutting energy were analyzed, and the multi-objective optimization model was constructed. The Multiobjective Particle Swarm Optimization algorithm introducing the Chaos Local Search algorithm and the adaptive inertial weight was applied to determine the optimal combination of milling parameters. It was observed that surface roughness was mainly influenced by feed… More >

SALLY NASER^1,2, WESAMELDIN SABER³, MOHAMMAD EL-METWALLY^4,*, MAHMOUD MOUSTAFA^5,6, ATTALLA EL-KOTT^5,7

BIOCELL, Vol.44, No.2, pp. 147-155, 2020, DOI:10.32604/biocell.2020.09522

Abstract Because of its antitumor therapeutic-activity, as well as its application in food industries to improve the quality, L-asparaginase has attracted considerable attention from several investigators. In recent years, fungi have occupied advanced rank among microorganisms in the production process of the enzyme. This review is spotting the light on the advantages of fungal enzyme and its applications in the food industry and medications. The solid-state fermentation was discussed as the wide alternative and most accepted biosynthesis technique. However, some lights were also spotted to the statistical experimental design of the fermentation process, mainly on the methodology of the response surface… More >