Ed Tse, Russell Knaus

Canadian Journal of Urology, Vol.11, No.2, pp. 2172-2185, 2004

Abstract Purpose: Since Guillonneau and Vallancien reintroduced transperitoneal laparoscopic radical prostatectomy in 1998, several other medical institutions in Europe have published their series and confirmed that laparoscopic radical prostatectomy (LRP) is a feasible and reproducible approach to the management of clinically localized prostate cancer; however, there have been few reports from North American medical institutions. We now report the results of our first 200 consecutive cases of LRP in a Canadian Medical Institution.
Materials and method: From February 2000 until April 2003, laparoscopic radical prostatectomy was performed on 200 out of 205 surgical candidates for radical prostatectomy. There… More >

Peter Pommerville¹, S. Larry Goldenberg², James W.L. Wilson³, Yves Fradet⁴, Jacques Corcos⁵, Brian A.P. Morris⁶

Canadian Journal of Urology, Vol.11, No.3, pp. 2290-2295, 2004

Abstract Introduction: Knowledge of the current status of manpower and resources is important in understanding the state of any medical specialty, and critical in planning for future recruitment, funding and infrastructure development.
Methods: In 2003, the Canadian Urological Association (CUA) conducted two nationwide surveys examining manpower, resources, and the technology available. One survey went only to academic and hospital leaders across the country (the resources survey), while the other was sent to the entire general membership of the CUA.
Results: The response rate for the resources survey was 67%, while that for the membership survey was 50.4%. The respondents'… More >

Saleh Binsaleh¹, Mana Al-Assiri¹, Samuel Aronson², Andrew Steinberg¹

Canadian Journal of Urology, Vol.11, No.4, pp. 2352-2353, 2004

Abstract We report a case of septic shock complicating transrectal ultrasound guided prostate biopsy despite antibiotic prophylaxis with ciprofloxacin. Patient was recently treated with the same agent for other infectious illnesses. More >

KARINA MANCINI, HEIDI DOLDER

BIOCELL, Vol.28, No.3, pp. 299-310, 2004, DOI:10.32604/biocell.2004.28.299

Abstract This study was undertaken to detect protein components in both sperm types of the butterfly Euptoieta hegesia. These spermatozoa possess complex extracellular structures for which the composition and functional significance are still unclear. In the apyrene sperm head, the proteic cap presented an external ring and an internal dense content; basic proteins were detected only in external portions. In the tail, the paracrystalline core of mitochondrial derivatives and the axoneme are rich in proteins. The extratesticular spermatozoa are covered by a proteic coat, which presented two distinct layers. In eupyrene spermatozoa, acrosome and nucleus were negatively… More >

Gang Bao¹, Andrew Tsourkas², Philip J. Santangelo²

Molecular & Cellular Biomechanics, Vol.1, No.1, pp. 23-36, 2004, DOI:10.3970/mcb.2004.001.023

Abstract The ability to detect, localize, quantify and monitor the expression of specific genes in living cells in real-time will offer unprecedented opportunities for advancement in molecular biology, disease pathophysiology, drug discovery, and medical diagnostics. However, current methods for quantifying gene expression employ either selective amplification (as in PCR) or saturation binding followed by removal of the excess probes (as in microarrays and in situ hybridization) to achieve specificity. Neither approach is applicable when detecting gene transcripts within living cells. Here we review the recent development in engineering nanostructured molecular probes for gene detection in vivo, describe More >

De Xie¹, Anthony M. Waas^1,2, Khaled W. Shahwan³, Jessica A. Schroeder⁴, Raymond G. Boeman⁵

CMES-Computer Modeling in Engineering & Sciences, Vol.6, No.6, pp. 515-524, 2004, DOI:10.3970/cmes.2004.006.515

Abstract A numerical method based on the virtual crack closure technique (VCCT) [Rybicki and Kanninen (1977)] and in conjunction with the finite element (FE) method is presented to compute strain energy release rates for cracks that kink. The method partitions the strain energy release rate and provides an efficient means to compute values of the mode I (G_I) and mode II (G_II) energy release rate at the tip of a kinking crack. The solution procedure is shown to be computationally efficient and operationally simple, involving only the nodal forces and displacements near the crack tip. Example problems More >

N. Mai-Duy¹, T. Tran-Cong²

CMES-Computer Modeling in Engineering & Sciences, Vol.6, No.1, pp. 59-76, 2004, DOI:10.3970/cmes.2004.006.059

Abstract This paper presents a new domain decomposition technique based on the use of Boundary Integral Equations (BIEs) for the analysis of viscous flow problems. The domain of interest is divided into a number of non-overlapping subdomains and an iterative procedure is then employed to update the boundary conditions at interfaces. The new feature in the present work is that at each iteration, the relevant two subdomains, together containing a particular interface, are assumed to satisfy the governing BI equations which they do at the end of a convergent iterative process. Hence the boundary conditions on More >

C. J. Reddy¹

CMES-Computer Modeling in Engineering & Sciences, Vol.5, No.5, pp. 455-462, 2004, DOI:10.3970/cmes.2004.005.455

Abstract This paper presents an efficient algorithm to evaluate multi-spectral and multi-angular monostatic radar cross section (RCS) of large objects with very fine increments. The technique is based on the combination of Model Based Parameter Estimation (MBPE) method with hybrid frequency domain formulations. A general approach to formulation of MBPE is presented along with a similar approach called the Asymptotic Waveform Evaluation (AWE). Various numerical examples are presented for multi-spectral response calculations using method of moments (MoM) and the hybrid Finite Element-MoM technique in conjunction with MBPE. Example application of MBPE for hybrid MoM-Physical Optics approach More >

Raj Mittra¹, V.V.S. Prakash¹

CMES-Computer Modeling in Engineering & Sciences, Vol.5, No.5, pp. 435-442, 2004, DOI:10.3970/cmes.2004.005.435

Abstract In this paper, we introduce a novel approach for the efficient solution of electromagnetic scattering problems from objects that can be represented in terms of facets. The approach is based on the use of the Characteristic Basis Functions (CBFs), which are high-level basis functions of special types, and whose domains are not bound by the conventional Rao, Wilton and Glisson (RWG) discretization using triangular patches that are typically$\lambda$/10 to$\lambda$/20 in size. In contrast, the CBFs are defined over much larger-size domains, even tens of wavelengths in size, with no limit placed on the dimensions of… More >

H. Okada¹, C. T. Liu², T. Ninomiya¹, Y. Fukui¹, N. Kumazawa¹

CMES-Computer Modeling in Engineering & Sciences, Vol.6, No.4, pp. 333-348, 2004, DOI:10.3970/cmes.2004.006.333

Abstract Formulations and applications of an element overlay technique for the mesoscopic analyses of composite structures are presented in this paper. As a zooming technique, the element overlay technique has been applied to various engineering problems. A finite element mesh having finer mesh discretization is superposed at the region to zoom the spatial resolution of analysis. Such a numerical technique is known as the s-version FEM (S-FEM). This paper aims at developing an S-FEM technique that is suited for the mesoscopic analysis of particulate composite materials. Local finite element models that contain the second phase material… More >