Larissa Stieven Montagna, Isabela CÉSAR Oyama, Rita de CÁSSIA Barbosa Camargo Lamparelli, Ana Paula Silva, THAÍS Larissa do Amaral Montanheiro, Ana Paula Lemes^*

Journal of Renewable Materials, Vol.7, No.2, pp. 117-128, 2019, DOI:10.32604/jrm.2019.00036

Abstract Biodegradable polymers have been increasingly used for scientific and commercial applications because they are similar to some conventional thermoplastics and exhibit the ability of self-degradation. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) nanocomposites films with 1 and 2 wt% of carbon nanotubes (CNT) were prepared by solution mixing, followed by solvent evaporation. In this work, PHBV/CNT nanocomposites were submitted to biodegradation in an aqueous medium for 34 days through a respirometric system. Then, the PHBV films were analyzed by the CO2 production and mineralization as a response of a microbial attack, which was monitored by back titration during all the… More >

Yang Yu¹, Ramiz Boy^1,2,*, Richard Kotek¹

Journal of Renewable Materials, Vol.7, No.1, pp. 41-55, 2019, DOI:10.32604/jrm.2019.00105

Abstract Current industrial methods for dissolution of cellulose in making regenerated cellulose products are relatively expensive, toxic and dangerous and have environmental problems coming with the hazard chemical wastes. To solve these problems, a novel ethylenediamine and potassium thiocyanate (ED/KSCN) solvent system was developed, that is economical, ecofriendly, and highly efficient. The ED/KSCN solvent system was proven to be a suitable solvent for fabricating cellulose (blended with other polymers) membranes. In this study, gluten was used to develop nonporous membranes with cellulose. The method of casting these membranes provided better ones than the former researchers’ techniques. More >

Kaoutar Kara^1,*, Fatiha Ouanji², El Mostapha LOTFI¹, Mohammed El Mahi¹, Mohamed Kacimi²

Journal of Renewable Materials, Vol.7, No.1, pp. 1-7, 2019, DOI:10.32604/jrm.2019.00016

Abstract A tricalcium phosphate (TCP) material was produced from sardine and mackerel waste using a heat treatment method after a Soxhlet extraction to obtain the non-soluble portion of fish waste. The bones were annealed at temperatures between 400°C and 1200°C. The thermal analysis (TG-DTA) was carried out to investigate the thermal stability of TCP and to confirm the removal of organic matter from the raw fish. The calcined bones were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and field emission scanning electron microscopy (FE-SEM). The calcium to phosphorous weight ratio was determined by More >

Jinxing Liu

The International Conference on Computational & Experimental Engineering and Sciences, Vol.21, No.1, pp. 8-8, 2019, DOI:10.32604/icces.2019.04952

Abstract A new method is proposed to simulate progressive failure processes in heterogeneous brittle materials such as concrete, ceramics, rocks etc., by considering the time-dependence of stress redistributions induced by local breakages. Two mechanisms of stress redistribution are incorporated into the proposed model in order to account for the influence of each local breakage on the remaining specimen: (1) One is the immediate release of internal forces in the breaking element, which is assumed to happen within an infinitesimal time when compared with the characteristic time of external loadings. The release of such internal forces is… More >

P. Shanmugapriya¹, J. Baskaran², C. Nayanatara^1,*, D. P. Kothari³

CMES-Computer Modeling in Engineering & Sciences, Vol.119, No.3, pp. 541-558, 2019, DOI:10.32604/cmes.2019.04074

Abstract The objective of this paper is to provide a robust Virtual Power Plant (VPP) network collaborated with Internet of Things (IoT) which uses a conceptual model to integrate each device in the grid. Based on the functionality all the devices which are purely distributed within the grid are networked initially from residential units to substations and up to service data and demand centres. To ensure the trapping of the available power and the efficient transfer of Distributed Generation (DG) power to the grid Distribution Active Control (DAC) strategy is used. Synchronized optimization of DG parameter… More >

Muhammad Arsalan¹, Falin Wu^1,*

CMES-Computer Modeling in Engineering & Sciences, Vol.119, No.2, pp. 249-261, 2019, DOI:10.32604/cmes.2019.04430

Abstract A good design of LNA for S band satellite navigation receivers and 4G LTE wireless communication system has been implemented in this paper. Due to increased congestion in the present L band, the S Band frequency from 2483.5-2500 MHz has been allocated for the future satellite navigation systems. For this purpose ATF-34143 amplifier (pHEMT) having high electron mobility and fast switching response has been chosen due to its very low Noise Figure (NF). The amplifier has been designed having bandwidth of 0.8 GHz from 1.8-2.6 GHz. Because of the large bandwidth, the amplifier could serve… More >

Yan Zou^1,2,3,*, Shaoliang Zhang¹, Yanhai Min¹

CMES-Computer Modeling in Engineering & Sciences, Vol.119, No.2, pp. 295-310, 2019, DOI:10.32604/cmes.2019.03873

Abstract The high precision population forecasting and spatial distribution modeling are very important for the theory and application of population sociology, city planning and Geo-Informatics. However, the two problems need to be solved for providing the high precision population information. One is how to improve the population forecasting precision of small area (e.g., street scale); another is how to improve the spatial resolution of urban population distribution model. To solve the two problems, some new methods are proposed in this contribution. (1) To improve the precision of small area population forecasting, a new method is developed… More >

Yong Chen^1,*, Weihua Lan¹, Chong Wang²

Journal on Big Data, Vol.1, No.2, pp. 47-54, 2019, DOI:10.32604/jbd.2019.06282

Abstract In order to solve information island problem of offshore oil and gas field production-related information system, including repetitive reporting and input of data, data isolation of central control system, inadequate follow-up analysis and development to support oil and gas field production management, and so on. Therefore, the introduction of MES (Manufacturing Execution System) production execution system in the manufacturing industry and downstream production of offshore oil has become an inevitable choice. This system utilizes the real-time database combined with relational database to collect the scattered structured data, such as the production process real-time data, production… More >

Syed Falahuddin Quadri¹, Xiaoyu Li^1,*, Desheng Zheng², Muhammad Umar Aftab¹, Yiming Huang³

Journal on Big Data, Vol.1, No.1, pp. 1-7, 2019, DOI:10.32604/jbd.2019.05899

Abstract Given the glut of information on the web, it is crucially important to have a system, which will parse the information appropriately and recommend users with relevant information, this class of systems is known as Recommendation Systems (RS)-it is one of the most extensively used systems on the web today. Recently, Deep Learning (DL) models are being used to generate recommendations, as it has shown state-of-the-art (SoTA) results in the field of Speech Recognition and Computer Vision in the last decade. However, the RS is a much harder problem, as the central variable in the… More >

Ruijiao Yin¹, Jie Yang^1,*

Journal on Artificial Intelligence, Vol.1, No.1, pp. 37-44, 2019, DOI:10.32604/jai.2019.05815

Abstract Based on the understanding of machine vision localization technology at home and abroad, this paper outlines the overall design of the system, and analyses the working principle and workflow of the robot with vision system in workpiece grinding. The hardware design of the system is introduced. The process of image processing is analyzed in detail, and the results of image processing are given. The basic parameters of camera imaging are taken as internal parameters. The camera calibration is obtained by rotation matrix R and translation parameter T. The coordinate transformation of camera coordinate system and More >