Lin Jiang^1,*, Na Wei^1,*, Jinzhou Zhao¹, Shouwei Zhou^1,2, Liehui Zhang¹, Qingping Li³, Guorong Wang¹, Jun Zhao¹, Kaisong Wu¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.21, No.4, pp. 81-83, 2019, DOI:10.32604/icces.2019.04515

Abstract With huge reserves, marine natural gas hydrate is one of the most potential unconventional alternative energy sources after shale gas, coalbed methane and tight gas. The research and pilot engineering of natural gas hydrate exploitation technology mainly adopts the depressurization method at home and abroad, all of which refer to the exploitation technology of conventional oil and gas.
While using the depressurization method to exploit the non-diagenetic gas hydrate, the undersea hydrate decomposes in situ, partly flows to the bottom of the well, and escapes into the seawater in large quantities, and the hydrate will face… More >

Junbo Wang^*, Leiting Dong

The International Conference on Computational & Experimental Engineering and Sciences, Vol.21, No.4, pp. 75-75, 2019, DOI:10.32604/icces.2019.04820

Abstract In this study, two/three-dimensional computational grains are developed for micromechanical modeling of heterogeneous materials with nanoscale inhomogeneities, considering the interface stress effect. Two types of computational grains are developed, depending on the types of inhomogeneity in each element. Each computational grain can include alternatively a spherical void or a spherical elastic inclusion. In these computational grains, an inter-element compatible displacement field is assumed along the element outer-boundary, and interior displacement fields in the matrix as well as in the inclusion are independently assumed as T-Trefftz trial functions. For planar problems, complex potentials are used to… More >

Jizeng Wang*, Cong Xu, Youhe Zhou

The International Conference on Computational & Experimental Engineering and Sciences, Vol.22, No.1, pp. 114-114, 2019, DOI:10.32604/icces.2019.05298

Abstract A high-order wavelet method is developed for general nonlinear boundary value problems with complex boundaries in mechanics. This method is established based on wavelet approximation of multiple integrals of interval bounded functions combined with an accurate and adjustable boundary extension technique. The convergence order of this approximation has been proven to be N as long as a typical family of wavelets named Coiflets with N-1 vanishing moment are adopted, which can be any positive even integers. Error analysis has proven that the proposed method is in accuracy of order N, and condition numbers of relevant More >

Wei Xia^1,2,*, Kun Wang¹, Haitao Yang¹, Shengping Shen¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.21, No.2, pp. 27-27, 2019, DOI:10.32604/icces.2019.05197

Abstract Panel flutter arises from the aeroelastic instability of the skin structures on the high-speed vehicles, usually in supersonic regime and combined with thermal environment. Unlike the catastrophic flutter of the wings, panel flutter tends to be treated as non-catastrophic one. The nonlinear panel flutter response is of great interest to find the fatigue loading spectra. Present work introduces an aeroelastic model for a thermal isolating panel made from functionally graded materials (FGMs). The Mindlin plate theory is employed to establish the structural equations, the first-order piston theory is adopted for the supersonic aerodynamic loads, and… More >

Joyce de P. Cipriano², N. C. Zanini¹, I. R. Dantas¹, D. R. Mulinari^1,*

Journal of Renewable Materials, Vol.7, No.10, pp. 1047-1053, 2019, DOI:10.32604/jrm.2019.00001

Abstract The use of natural fibers as an additive in polymeric matrices has attracted interest of the automotive industries, for its low cost, mechanical properties, biodegradability and lightness. However, the hydrophilic nature of the fiber makes polymer compatibility difficult. Fiber surface treatments can be used to enhance the fiber/matrix interface. In the present work, polypropylene (PP) composites reinforced with fibers from macadamia nutshell were obtained and characterized. Macadamia nutshell fibers were treated by an alkaline treatment with sodium hydroxide (NaOH 4%) to improve adhesion between fibers and matrix. Fibers were characterized by techniques of Scanning Electron More >

M. A. Shaharuzaman^1,2,4, S. M. Sapuan^1,3,*, M. R. Mansor^2,4, M. Y. M. Zuhri^1,3

Journal of Renewable Materials, Vol.7, No.10, pp. 997-1010, 2019, DOI:10.32604/jrm.2019.07529

Abstract The enforcement on sustainable design and environmental-friendly products has attracted the interest of researchers and engineers in the context of replacing metals and synthetic fibers with natural based fibers, especially in the automotive industry. However, studies on sustainable natural fiber material selection in the automotive industry are limited. Evaluation for the side-door impact beam was conducted by gathering product design specification from literature which amounted to seven criteria and it was forwarded to ten decision makers with automotive engineering and product design background for evaluation. The weightage required for decision-making was obtained using the Analytic… More >

Yin Yang¹, Xiaoyan Cao¹, Zhiqiang Wang^1,*, Zhijun Liang¹, Jianhui Zhou^2,*

Journal of Renewable Materials, Vol.7, No.10, pp. 957-965, 2019, DOI:10.32604/jrm.2019.07558

Abstract The out-of-plane shear properties of cross-laminated timber (CLT) substantially influence the overall mechanical properties of CLT. Various testing methods and theories related to these properties have recently been developed. The effects of the number of layers (three and five layers) and testing method (short-span three- and four-point bending tests) on the out-of-plane shear properties of CLT were evaluated. The out-of-plane shear strength values were calculated based on different theories for comparison. The failure mode in the short-span four-point bending (FPB) method was mainly the rolling shear (RS) failure in the cross layers, indicating that the More >

Kahina Iggui^1,2,*, Mustapha Kaci¹, Mohamed Mahlous³, Nicolas Le Moigne⁴, Anne Bergeret⁴

Journal of Renewable Materials, Vol.7, No.9, pp. 807-820, 2019, DOI:10.32604/jrm.2019.06778

Abstract In this paper, the effects of gamma irradiation on Cast poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and PHBV/Cloisite 30B (C30B) (3 wt%) bionanocomposite prepared by melt compounding, were evaluated at various doses, i.e., 5, 15, 20, 50 and 100 kGy at room temperature in air. Changes in molecular weight, morphology and physical properties were investigated. The study showed that the main degradation mechanism occurring in gamma irradiation in both Cast PHBV and C-PHBV/3C30B bionanocomposite is chain scission, responsible for the decrease of molecular weight. Differential scanning calorimetry (DSC) data indicated a regular decrease in crystallization temperature, melting temperature and… More >

Morgan Chabannes^1,2,*, Frédéric Becquart^1,2, Nor-Edine Abriak^1,2

Journal of Renewable Materials, Vol.7, No.9, pp. 855-863, 2019, DOI:10.32604/jrm.2019.06779

Abstract The return to old building methods by mixing crop by-products with mineral binders is arousing great interest in Europe since about 25 years. The use of these bio-aggregates based materials for the design of building envelopes is a valuable opportunity to deal with increasingly demanding thermal regulations. In addition, the regulatory framework is moving towards reducing the overall car-bon footprint of new buildings. Some traditional and historic buildings are based on timber framing with earth-straw as infill material for instance. Hemp concrete is a bio-based material that can be manually tamped in timber stud walls… More >

Daniel Scida^1,*, Sébastien Alix¹, Stéphane Buet¹, El Hadi Saidane¹, François Courmont^1,2, Karim Behlouli², Rezak Ayad¹

Journal of Renewable Materials, Vol.7, No.9, pp. 865-875, 2019, DOI:10.32604/jrm.2019.06609

Abstract This work aims at studying the effect of hygrothermal and UV cyclic aging on the tensile properties and esthetic characteristics of non-woven composites. The composite materials were thermo-compressed from non-woven mats made up of PP and flax or kenaf fibers. This works included evaluating the change in color appearance and analyzing the variations in tensile properties and damage mechanisms, depending on the aging time. The presence of the UV protection film on the composite surface showed its effectiveness against aging. From visual observations and measurement of colorimetric parameters, it has been proved effective in the More >