Qi Wang^1,2,3,*, Changsong Yang^2,3,5, Yuxiang Wang^1,2,3, Shao-en Wu⁴

Intelligent Automation & Soft Computing, Vol.26, No.6, pp. 1433-1442, 2020, DOI:10.32604/iasc.2020.012759 - 24 December 2020

Abstract To improve the positioning accuracy of farming vehicle in precision agriculture, an integrated positioning system is proposed based on Global Navigation Satellite System (GNSS)/Strapdown Inertial Navigation System (SINS)/Wireless Sensor Networks (WSN) with low cost and high reliability. The principles of commonly used localization technologies in vehicle positioning are compared and the Received Signal Strength Indication (RSSI) based measurement method is chosen as the integrated positioning system for information fusion considering the complexity of the algorithm, positioning accuracy and hardware requirements in the application scenario. The research of wireless signal propagation loss model of farmland environment More >

Ru Jin^*, Xinlian Zhou, Yue Wang

Journal of Information Hiding and Privacy Protection, Vol.2, No.3, pp. 115-123, 2020, DOI:10.32604/jihpp.2020.010180 - 18 December 2020

Abstract In a wireless sensor network [1], the operation of a node depends on the battery power it carries. Because of the environmental reasons, the node cannot replace the battery. In order to improve the life cycle of the network, energy becomes one of the key problems in the design of the wireless sensor network (WSN) routing protocol [2]. This paper proposes a routing protocol ERGD based on the method of gradient descent that can minimizes the consumption of energy. Within the communication radius of the current node, the distance between the current node and the More >

Shayesteh Tabatabaei^1,∗

Computer Systems Science and Engineering, Vol.35, No.6, pp. 477-494, 2020, DOI:10.32604/csse.2020.35.477

Abstract In recent years, the application of WSNs has been remarkably increased and notable developments and advances have been achieved in this regard. In particular, thanks to smart, cheaper and smaller nodes, different types of information can be detected and gathered in different environments and under different conditions. As the popularity of WSNs has increased, the problems and issues related to networks are examined and investigated. As a case in point, routing issue is one of the main challenges in this regard which has a direct impact on the performance of sensor networks. In WSN routing,… More >

T. Zhang^1,2, D. G. Zhang^1,2,*, X. H. Liu^1,2, C. L. Gong^1,2

Intelligent Automation & Soft Computing, Vol.26, No.3, pp. 429-437, 2020, DOI:10.32604/iasc.2020.013919

Abstract It is known that the locating accuracy of the traditional Distance Vector-HOP (DV-HOP) approach in a Wireless Sensor Network (WSN) depends on the density of the anchor node. A novel WSN-oriented locating approach based on a node's density is proposed in this paper. The approach can compute the distance of the node based on the maximum likelihood estimation strategy. It can improve the accuracy ratio of the measuring distance among the nodes. The relative nodes of a WSN can find the average hop distances by estimating the distances from themselves to their circular nodes. In More >

Ting Xu¹, Ming Zhao¹, Xin Yao^{1, *}, Kun He²

CMC-Computers, Materials & Continua, Vol.65, No.2, pp. 1605-1624, 2020, DOI:10.32604/cmc.2020.011458 - 20 August 2020

Abstract With the expansion of the application range and network scale of wireless sensor networks in recent years, WSNs often generate data surges and delay queues during the transmission process, causing network paralysis, even resulting in local or global congestion. In this paper, a dynamically Adjusted Duty Cycle for Optimized Congestion based on a real-time Queue Length (ADCOC) scheme is proposed. In order to improve the resource utilization rate of network nodes, we carried out optimization analysis based on the theory and applied it to the adjustment of the node’s duty cycle strategy. Using this strategy… More >

Tianle Zhang¹, Lihua Yin¹, Xiang Cui^{1, *}, Abhishek Behl², Fuqiang Dong³, Ziheng Cheng⁴, Kuo Ma⁴

CMC-Computers, Materials & Continua, Vol.65, No.1, pp. 835-845, 2020, DOI:10.32604/cmc.2020.06050 - 23 July 2020

Abstract In Wireless Sensor Network (WSN), because battery and energy supply are constraints, sleep scheduling is always needed to save energy while maintaining connectivity for packet delivery. Traditional schemes have to ensure high duty cycling to ensure enough percentage of active nodes and then derogate the energy efficiency. This paper proposes an RFID based non-preemptive random sleep scheduling scheme with stable low duty cycle. It employs delay tolerant network routing protocol to tackle the frequent disconnections. A low-power RFID based non-preemptive wakeup signal is used to confirm the availability of next-hop before sending packet. It eliminates More >

Xinliang Tang¹, Man Zhang¹, Pingping Yu¹, Wei Liu², Ning Cao^{3, *}, Yunfeng Xu⁴

CMC-Computers, Materials & Continua, Vol.64, No.3, pp. 1725-1739, 2020, DOI:10.32604/cmc.2020.010272 - 30 June 2020

Abstract In a large-scale wireless sensor network (WSN), densely distributed sensor nodes process a large amount of data. The aggregation of data in a network can consume a great amount of energy. To balance and reduce the energy consumption of nodes in a WSN and extend the network life, this paper proposes a nonuniform clustering routing algorithm based on the improved K-means algorithm. The algorithm uses a clustering method to form and optimize clusters, and it selects appropriate cluster heads to balance network energy consumption and extend the life cycle of the WSN. To ensure that More >

V. Manikandan^{1, *}, M. Sivaram¹, Amin Salih Mohammed², V. Porkodi³

CMC-Computers, Materials & Continua, Vol.64, No.2, pp. 753-776, 2020, DOI:10.32604/cmc.2020.010267 - 10 June 2020

Abstract Wireless Sensor Networks (WSNs) comprises low power devices that are randomly distributed in a geographically isolated region. The energy consumption of nodes is an essential factor to be considered. Therefore, an improved energy management technique is designed in this investigation to reduce its consumption and to enhance the network’s lifetime. This can be attained by balancing energy clusters using a meta-heuristic Firefly algorithm model for network communication. This improved technique is based on the cluster head selection technique with measurement of the tour length of fireflies. Time Division Multiple Access (TDMA) scheduler is also improved… More >

Congrong Tang^{1, *}

Journal of Quantum Computing, Vol.2, No.1, pp. 1-9, 2020, DOI:10.32604/jqc.2020.09153 - 28 May 2020

Abstract With the rapid development of highway transportation in China, intelligent transportation has become an important part of the traffic structure, and wireless sensor networks are also widely used in intelligent transportation. However, in the wireless traffic sensor network, there is a certain error in the positioning of the anchor blind nodes. In the process of tracking the feedback information, the results of determining the position are very different. Based on the maximum degree of tension, the road traffic wireless Research and analysis of blind node location in sensor networks, and propose solutions and measures to More >

Nithya Rekha Sivakumar^{1, *}

CMC-Computers, Materials & Continua, Vol.64, No.1, pp. 81-96, 2020, DOI:10.32604/cmc.2020.08851 - 20 May 2020

Abstract In the past few decades, Energy Efficiency (EE) has been a significant challenge in Wireless Sensor Networks (WSNs). WSN requires reduced transmission delay and higher throughput with high quality services, it further pays much attention in increased energy consumption to improve the network lifetime. To collect and transmit data Clustering based routing algorithm is considered as an effective way. Cluster Head (CH) acts as an essential role in network connectivity and perform data transmission and data aggregation, where the energy consumption is superior to non-CH nodes. Conventional clustering approaches attempts to cluster nodes of same… More >