Prabhakar Misra¹, Silvina M. Gatica¹, Obafemi Otelaja²

The International Conference on Computational & Experimental Engineering and Sciences, Vol.5, No.4, pp. 205-210, 2008, DOI:10.3970/icces.2008.005.205

Abstract Nanobubbles form either spontaneously or by induction at the surface of certain solids immersed in a liquid. Atomic Force Microscopy observations have confirmed their formation. Such bubbles have sizes in the range 10-100 nm and have important ramifications for properties of interfaces and could be responsible for long-range hydrophobic attractive forces. In addition, as a potential application, the use of nanobubbles -- in tandem with ultrasound -- has been proposed for the treatment of strokes. Formation of nanobubbles at the water-graphite interface influences the adsorption of nanoparticles and the corresponding wetting properties. An important parameter More >

H.K. Mebatsion^1,2, P. Verboven¹, P. T. Jancsók¹, Q.T. Ho¹, B.E. Verlinden³, B.M. Nicolaï^1,3

CMES-Computer Modeling in Engineering & Sciences, Vol.29, No.3, pp. 137-150, 2008, DOI:10.3970/cmes.2008.029.137

Abstract Transport processes of gas and moisture are among the most important physiological processes in plant tissue. Microscale transport models based on Navier-Stokes equations provide insight into such processes at the microscopic scale. Due to microscopic complexity, numerical solutions based on the finite element or finite volume methods are mandatory. Therefore, a 3D geometric model of the tissue is essential. In this article, a novel algorithm for geometric reconstruction of 2D slices of synchrotron tomographic images is presented. The boundaries of 2D cells on individual slices were digitized to establish a set of boundary coordinates and… More >

Q.W. Ma¹

CMES-Computer Modeling in Engineering & Sciences, Vol.23, No.2, pp. 75-90, 2008, DOI:10.3970/cmes.2008.023.075

Abstract In the MLPG_R (Meshless Local Petrove-Galerkin based on Rankine source solution) method, one needs a meshless interpolation scheme for an unknown function to discretise the governing equation. The MLS (moving least square) method has been used for this purpose so far. The MLS method requires inverse of matrix or solution of a linear algebraic system and so is quite time-consuming. In this paper, a new scheme, called simplified finite difference interpolation (SFDI), is devised. This scheme is generally as accurate as the MLS method but does not need matrix inverse and consume less CPU time More >

Thomas Boeck¹, Alexander Nepomnyashchy^2,3, Ilya Simanovskii²

FDMP-Fluid Dynamics & Materials Processing, Vol.4, No.1, pp. 11-20, 2008, DOI:10.3970/fdmp.2008.004.011

Abstract Anticonvection in a two-layer system of mercury and water is studied using three-dimensional direct numerical simulations with a Fourier-Chebyshev spectral method. The two fluid layers have equal thicknesses and are uniformly heated from above. Interface deformations and surface tension gradients are neglected. The quiescent state is replaced by steady hexagons upon increasing the heating from above. We investigate the destabilization of this primary convective pattern in a small and in a large computational domain upon increasing the temperature difference across the two fluid layers. For the large domain the convection cells become disordered at about More >

Bonvissuto GL¹, CA Busso²

Phyton-International Journal of Experimental Botany, Vol.76, pp. 119-131, 2007, DOI:10.32604/phyton.2007.76.119

Abstract The effects of various temperature combinations and water potentials were determined on the germination of Atriplex lampa Gill. ex Moquin, Larrea divaricata Cav., Leymus erianthus (Phil.) Dubcovsky, Stipa neaei Nees ex Steudel and Poa ligularis Nees ap. Steudel under controlled conditions. The tested hypothesis was that seed germination increases with increasing temperatures and water potentials in A. lampa, L. divaricata, L. erianthus, S. neaei and P. ligularis, and that time to reach 50% of total germination is greater at lower than higher water potentials. PEG 2000 was used to impose water stress conditions. In general, obtained results conducted to accept the posted hyphotesis. More >

García-Suárez¹ F, L Carreto-Montoya², R Cárdenas-Navarro³, JC Díaz-Pérez⁴, R López-Gómez

Phyton-International Journal of Experimental Botany, Vol.76, pp. 19-26, 2007, DOI:10.32604/phyton.2007.76.019

Abstract In this work we contribute to the knowledge of the reproductive phenology of Stenocereus stellatus (Pfeiffer,Riccobono), a columnar cactus that produces fruits of high commercial perspectives known as “pitayas”. This kind of pitayas are produced for local commercialization in back orchards in some regions of the Mexican dry tropics. These fruits are produced only in the apical part of the cactus “arms”. Our results show that fruit development of pitayas is highly associated to the rainy season of the year. This behavior is different from the reproductive strategy of other columnar cactus species that produce other More >

Rodríguez Rivera M F, LR Sosa, EA Fernández, M I Reale, V Villarreal

Phyton-International Journal of Experimental Botany, Vol.76, pp. 5-17, 2007, DOI:10.32604/phyton.2007.76.005

Abstract We studied the germination capacity of Bulnesia retama seeds to conditions of water stress simulated by PEG6000 at different temperatures. We also evaluated their recovery to water stress conditions. Seeds were collected in San Luis city, Argentina. They were placed in polyethylene bags with different concentrations of PEG6000 to simulate water potentials of 0 (control); -0.25; -0.5; -0.75; -1; -1.25 and -1.5 MPa. Seeds were placed in culture oven without light to three temperatures: 18º, 25º and 32 ºC. Non-germinated seeds were washed and placed again to germinate in distilled water to 25 ºC. We registered… More >

Dr. V. Ramani Bai, Prof. Mohamad Rom Tamjis

The International Conference on Computational & Experimental Engineering and Sciences, Vol.4, No.1, pp. 31-40, 2007, DOI:10.3970/icces.2007.004.031

Abstract The aim of this paper is to develop a fuzzy logic model for deriving optimal operational rules at the macro level for better performance and control of hydro-power generation. System modeling based on conventional mathematical tools is not well suited for dealing with ill-defined and uncertain systems. By contrast, a fuzzy inference system employing "if-then" rules can model the qualitative aspects of human knowledge and reasoning processes without employing precise quantitative analyses. In fuzzy logic, diagnosis is based on imprecise data. For instance, when the demand is `very high' i.e. in linguistic term, then its More >

Shigeaki Shiotani¹, Atsushi Hagiwara², Yoshitaka Sakakura³

The International Conference on Computational & Experimental Engineering and Sciences, Vol.4, No.1, pp. 19-24, 2007, DOI:10.3970/icces.2007.004.019

Abstract Marine fish larvae are fragile against physical stress. However, few studies have been conducted to evaluate the flow field in a rearing tank, which is assumed to provide a high degree of physical stress to marine fish larvae. This paper is a report on the numerical estimation of stationary flow in the rearing tank of marine fish larvae. The calculated flow in the rearing tank was compared with the experimental one. The calculation of the stationary flow in the rearing tank showed good qualitative and quantitative agreement with the experimental results. More >

Doo Kie Kim¹, Dong Hyawn Kim², Seong Kyu Chang¹, Sang Kil Chang¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.2, No.2, pp. 35-40, 2007, DOI:10.3970/icces.2007.002.035

Abstract The stability numbers determining the Armor units are very important to design breakwaters, because armor units are designed for defending breakwaters from repeated wave loads. This study presents a probabilistic neural network (PNN) for predicting the stability number of armor blocks of breakwaters. PNN used the experimental data of van der Meer as train and test data. The estimated results of PNN were compared with those of empirical formula and previous artificial neural network (ANN) model. The comparison results showed the efficiency of the proposed method in the prediction of the stability numbers in spite More >