Hicham Moujahid¹, Bouchaib Cherradi^1,2,*, Mohammed Al-Sarem³, Lhoussain Bahatti¹, Abou Bakr Assedik Mohammed Yahya Eljialy⁴, Abdullah Alsaeedi³, Faisal Saeed³

Intelligent Automation & Soft Computing, Vol.32, No.2, pp. 723-745, 2022, DOI:10.32604/iasc.2022.022179

Abstract With daily increasing of suspected COVID-19 cases, the likelihood of the virus mutation increases also causing the appearance of virulent variants having a high level of replication. Automatic diagnosis methods of COVID-19 disease are very important in the medical community. An automatic diagnosis could be performed using machine and deep learning techniques to analyze and classify different lung X-ray images. Many research studies proposed automatic methods for detecting and predicting COVID-19 patients based on their clinical data. In the leak of valid X-ray images for patients with COVID-19 datasets, several researchers proposed to use augmentation techniques to bypass this limitation.… More >

Anika Tahsin Meem¹, Mohammad Monirujjaman Khan^1,*, Mehedi Masud², Sultan Aljahdali²

Computer Systems Science and Engineering, Vol.41, No.3, pp. 1223-1240, 2022, DOI:10.32604/csse.2022.021563

Abstract The COVID-19 pandemic has caused trouble in people’s daily lives and ruined several economies around the world, killing millions of people thus far. It is essential to screen the affected patients in a timely and cost-effective manner in order to fight this disease. This paper presents the prediction of COVID-19 with Chest X-Ray images, and the implementation of an image processing system operated using deep learning and neural networks. In this paper, a Deep Learning, Machine Learning, and Convolutional Neural Network-based approach for predicting Covid-19 positive and normal patients using Chest X-Ray pictures is proposed. In this study, machine learning… More >

Ahed Abugabah^1,*, Atif Mehmood², Ahmad Ali AL Zubi³, Louis Sanzogni⁴

Computer Systems Science and Engineering, Vol.41, No.3, pp. 997-1008, 2022, DOI:10.32604/csse.2022.021438

Abstract The outbreak of the novel coronavirus has spread worldwide, and millions of people are being infected. Image or detection classification is one of the first application areas of deep learning, which has a significant contribution to medical image analysis. In classification detection, one or more images (detection) are usually used as input, and diagnostic variables (such as whether there is a disease) are used as output. The novel coronavirus has spread across the world, infecting millions of people. Early-stage detection of critical cases of COVID-19 is essential. X-ray scans are used in clinical studies to diagnose COVID-19 and Pneumonia early.… More >

Walid El-Shafai¹, Samy Abd El-Nabi^1,2, El-Sayed M. El-Rabaie¹, Anas M. Ali^1,2, Naglaa F. Soliman^3,*, Abeer D. Algarni³, Fathi E. Abd El-Samie^1,3

CMC-Computers, Materials & Continua, Vol.70, No.3, pp. 6107-6125, 2022, DOI:10.32604/cmc.2022.020698

Abstract Effective medical diagnosis is dramatically expensive, especially in third-world countries. One of the common diseases is pneumonia, and because of the remarkable similarity between its types and the limited number of medical images for recent diseases related to pneumonia, the medical diagnosis of these diseases is a significant challenge. Hence, transfer learning represents a promising solution in transferring knowledge from generic tasks to specific tasks. Unfortunately, experimentation and utilization of different models of transfer learning do not achieve satisfactory results. In this study, we suggest the implementation of an automatic detection model, namely CADTra, to efficiently diagnose pneumonia-related diseases. This… More >

Walid El-Shafai¹, Abeer D. Algarni^2,*, Ghada M. El Banby³, Fathi E. Abd El-Samie^1,2, Naglaa F. Soliman^2,4

Intelligent Automation & Soft Computing, Vol.31, No.3, pp. 1561-1575, 2022, DOI:10.32604/iasc.2022.020386

Abstract Automated diagnosis based on medical images is a very promising trend in modern healthcare services. For the task of automated diagnosis, there should be flexibility to deal with an enormous amount of data represented in the form of medical images. In addition, efficient algorithms that could be adapted according to the nature of images should be used. The importance of automated medical diagnosis has been maximized with the evolution of COVID-19 pandemic. COVID-19 first appeared in China, Wuhan, and then it has exploded in the whole world with a very bad impact on our daily life. The third wave of… More >

Junding Sun^1,3,#, Xiang Li^1,#, Chaosheng Tang^1,*, Shixin Chen^2,*

CMES-Computer Modeling in Engineering & Sciences, Vol.129, No.2, pp. 729-753, 2021, DOI:10.32604/cmes.2021.016416

Abstract Purpose: As to January 11, 2021, coronavirus disease (COVID-19) has caused more than 2 million deaths worldwide. Mainly diagnostic methods of COVID-19 are: (i) nucleic acid testing. This method requires high requirements on the sample testing environment. When collecting samples, staff are in a susceptible environment, which increases the risk of infection. (ii) chest computed tomography. The cost of it is high and some radiation in the scan process. (iii) chest X-ray images. It has the advantages of fast imaging, higher spatial recognition than chest computed tomography. Therefore, our team chose the chest X-ray images as the experimental dataset in… More >

Ahmed Reda^*, Sherif Barakat, Amira Rezk

CMC-Computers, Materials & Continua, Vol.70, No.1, pp. 1381-1399, 2022, DOI:10.32604/cmc.2022.019809

Abstract Many respiratory infections around the world have been caused by coronaviruses. COVID-19 is one of the most serious coronaviruses due to its rapid spread between people and the lowest survival rate. There is a high need for computer-assisted diagnostics (CAD) in the area of artificial intelligence to help doctors and radiologists identify COVID-19 patients in cloud systems. Machine learning (ML) has been used to examine chest X-ray frames. In this paper, a new transfer learning-based optimized extreme deep learning paradigm is proposed to identify the chest X-ray picture into three classes, a pneumonia patient, a COVID-19 patient, or a normal… More >

Shubham Mahajan^1,*, Akshay Raina², Mohamed Abouhawwash^3,4, Xiao-Zhi Gao⁵, Amit Kant Pandit¹

CMC-Computers, Materials & Continua, Vol.70, No.1, pp. 1541-1556, 2022, DOI:10.32604/cmc.2022.019496

Abstract Like the Covid-19 pandemic, smallpox virus infection broke out in the last century, wherein 500 million deaths were reported along with enormous economic loss. But unlike smallpox, the Covid-19 recorded a low exponential infection rate and mortality rate due to advancement in medical aid and diagnostics. Data analytics, machine learning, and automation techniques can help in early diagnostics and supporting treatments of many reported patients. This paper proposes a robust and efficient methodology for the early detection of COVID-19 from Chest X-Ray scans utilizing enhanced deep learning techniques. Our study suggests that using the Prediction and Deconvolutional Modules in combination… More >

Walid El-Shafai¹, Anas M. Ali^1,2, El-Sayed M. El-Rabaie¹, Naglaa F. Soliman^3,*, Abeer D. Algarni³, Fathi E. Abd El-Samie^1,3

CMC-Computers, Materials & Continua, Vol.70, No.1, pp. 1141-1157, 2022, DOI:10.32604/cmc.2022.018547

Abstract In developing countries, medical diagnosis is expensive and time consuming. Hence, automatic diagnosis can be a good cheap alternative. This task can be performed with artificial intelligence tools such as deep Convolutional Neural Networks (CNNs). These tools can be used on medical images to speed up the diagnosis process and save the efforts of specialists. The deep CNNs allow direct learning from the medical images. However, the accessibility of classified data is still the largest challenge, particularly in the field of medical imaging. Transfer learning can deliver an effective and promising solution by transferring knowledge from universal object detection CNNs… More >

Anas Basalamah¹, Shadikur Rahman^2,*

Computer Systems Science and Engineering, Vol.40, No.1, pp. 375-388, 2022, DOI:10.32604/csse.2022.016949

Abstract This paper demonstrates empirical research on using convolutional neural networks (CNN) of deep learning techniques to classify X-rays of COVID-19 patients versus normal patients by feature extraction. Feature extraction is one of the most significant phases for classifying medical X-rays radiography that requires inclusive domain knowledge. In this study, CNN architectures such as VGG-16, VGG-19, RestNet50, RestNet18 are compared, and an optimized model for feature extraction in X-ray images from various domains involving several classes is proposed. An X-ray radiography classifier with TensorFlow GPU is created executing CNN architectures and our proposed optimized model for classifying COVID-19 (Negative or Positive).… More >