Kazem Hejranfar¹, Mohammad-Hadi Azampour¹

CMES-Computer Modeling in Engineering & Sciences, Vol.106, No.6, pp. 395-439, 2015, DOI:10.3970/cmes.2015.106.395

Abstract In this study, cell-centered (CC) and cell-vertex (CV) finite volume (FV) approaches are applied and assessed for the simulation of two-dimensional structural dynamics on arbitrary quadrilateral grids. For the calculation of boundary nodes’ displacement in the CC FV approach, three methods are employed. The first method is a simple linear regression of displacement of boundary nodes from the displacement of interior cell centers. In the second method, an extrapolation technique is applied for this purpose and, in the third method; the line boundary cell technique is incorporated into the solution algorithm in an explicit manner.… More >

Amnart Boonloi^*

Frontiers in Heat and Mass Transfer, Vol.5, pp. 1-12, 2014, DOI:10.5098/hmt.5.8

Abstract A mathematical analysis of the heat transfer enhancement, thermal performance and flow configurations in a heat exchanger square duct with diagonal inserted plate vortex generators is presented. The 30o V–shaped baffles are modified and placed on the double sides of the thin plate or frame (with no plate) which inserted diagonally in the square duct. The effects of blockage ratio (b/H, BR), the pitch ratio (p/H, PR), flow direction (V–Downstream and V–Upstream) and configuration of inserting plate are investigated for Reynolds number based on the hydraulic diameter of the square duct, D_h, Re = 100 –… More >

Mohammad Reza RAMEZANI¹, Hossein NADERI-MANESH^{1, *}, Hossain-Ali RAFIEEPOUR²

BIOCELL, Vol.38, No.1, pp. 11-16, 2014, DOI:10.32604/biocell.2014.38.011

Abstract Cell-based biosensors have become a research hotspot in the biosensors and bioelectronics fields. The main feature of cell-based biosensors is immobilization of living cells on the surface of transducers. Different types of polymers which are used as scaffolds for cell growth should be biocompatible and should have reactive functional groups for further attachment of biomolecules. In this work, cell attachment and proliferation on chitosan hydrogel, chitosan-gelatin and gold nanoparticle-chitosan nanocomposite membranes was studied. Characterization of the membranes was performed using scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). Cytotoxicity assessment on HEK293 More >

Zhengzheng Cao¹, Yuejin Zhou^1,2, Ping Xu¹, Jiawei Li¹

CMES-Computer Modeling in Engineering & Sciences, Vol.101, No.5, pp. 351-364, 2014, DOI:10.3970/cmes.2014.101.351

Abstract In accordance with the influence of underground mining on the deformation and failure of a shallow-buried gas pipeline, the pipe-soil interaction during mining is classified into two stages, namely coordinated deformation stage and partial hanging stage. According to the mechanical characteristics of the buried pipeline in each stage, the models of a) a beam on an elastic foundation, b) an elastic beam under uniform load, and c) a vertical and horizontal bending beam are introduced in a mining subsidence zone to mechanically analyze, respectively a) the pipeline in non-mining subsidence zone, b) the pipeline at… More >

Michael Metcalfe¹, Eric Estey², Niels-Erik Jacobsen², Don Voaklander³, Adrian S. Fairey²

Canadian Journal of Urology, Vol.20, No.1, pp. 6626-6631, 2013

Abstract Introduction: We examined the association between type of urinary diversion and quality of life (QoL) in patients who underwent radical cystectomy for primary bladder cancer using a validated, disease-specific instrument.
Materials and methods: A cohort of 314 consecutive patients treated with radical cystectomy and urinary diversion for primary bladder cancer between January 2000 and December 2006 was analyzed. Participants were mailed the validated Functional Assessment of Cancer Therapy–Vanderbilt Cystectomy Index (FACT-VCI) questionnaire. Univariable and multivariable linear regression analyses were used to examine the association between type of urinary diversion (ileal conduit versus orthotopic neobladder) and QoL.
Results: Eighty-four… More >

Christian Boe, Jose Rodriguez, Carlos Plazaola, Ilka Banfield A maly Fong, Rony Caballero, Adan Vega

CMES-Computer Modeling in Engineering & Sciences, Vol.90, No.2, pp. 165-177, 2013, DOI:10.3970/cmes.2013.090.165

Abstract The authors have developed a remote operate vehicle (ROV) that allow carried out highly risky task, in confined space such as inside of submerged sewers and pipes systems, areas were commercial ROV may not provide good performing. In addition, this ROV is low cost. This paper analyses based on the computational fluid dynamic the hydrodynamic performance of this ROV. The first part of the paper presents the theoretical approach and introduces the finite volume model developed in order to complete the study. Results of the model compare with published research shows good agreement. The second More >

Arvind Pattamatta^a,*, Ghanshyam Singh^b

Frontiers in Heat and Mass Transfer, Vol.3, No.2, pp. 1-11, 2012, DOI:10.5098/hmt.v3.2.3005

Abstract The present study deals with the assessment of different turbulence models for heated wall jet flow. The velocity field and thermal characteristics for isothermal and uniform heat flux surfaces in the presence of wall jet flow have been predicted using different turbulence models and the results are compared against the experimental data of Wygnanski et al. (1992), Schneider and Goldstein (1994), and AbdulNour et al. (2000). Thirteen different turbulence models are considered for validation, which include the Standard k-ε (SKE), Realizable k-ε (RKE), shear stress transport (SST), Sarkar & So (SSA), v ² -f, Reynolds stress… More >

Leandro Fleck Fadel Miguel¹, Letícia Fleck Fadel Miguel²

Structural Durability & Health Monitoring, Vol.8, No.3, pp. 249-270, 2012, DOI:10.32604/sdhm.2012.008.249

Abstract Model updating may be defined as an adjustment on the FE model through modal parameters experimentally obtained, in order to better represent its dynamic behavior. From this definition, structural health monitoring (SHM) methods can be considered closely related with these procedures, because it refers to the implementation of in situ non-destructive sensing and analysis of the dynamic system characteristics, which aims to detect changes that could indicate damage. Within this context, the present paper evaluates an iterative model updating approach when it is subjected to experimental vibration data. In addition, after getting the experimental adjusted… More >

D. Crivelli¹, M. Guagliano², A. Monici³

Structural Durability & Health Monitoring, Vol.8, No.2, pp. 177-192, 2012, DOI:10.3970/sdhm.2012.008.177

Abstract Pultrusion is a process for manufacturing uniform section composite profiles, which allows to obtain structural elements of virtually any length. The use of E-glass fiber allows to obtain a material with a good rigidity-to-weight and strength-to-weight ratio; these features allowed to use these materials in civil structures, such as poles for anti-noise panels and public lighting, also thanks to their insulating properties. However, the knowledge on the damage development of these materials is still uncertain, and this is slowing down their development.
For these reasons, an experimental study on pultruded materials aimed at identifying the damage… More >

G. Nicoletto¹, A. Saletti²

Structural Durability & Health Monitoring, Vol.8, No.2, pp. 131-148, 2012, DOI:10.3970/sdhm.2012.008.131

Abstract Fatigue strengthening of fillets by deep rolling is finding increased application for example in engine crankshaft production for functional and economical reasons. A fatigue design method aimed at exploiting the residual stresses that develop at a notched part following the rolling process is proposed. It is based on the superposition of residual stresses obtained by elastic-plastic FE simulation of the rolling process and the cyclic elastic stresses within a Haigh diagram framework. The fatigue design method is assessed using the experimental evidence obtained by testing notched specimens made of 30NiCrMo12 steel subjected to different rolling More >