Shui-Hua Wang¹, Muhammad Attique Khan², Yu-Dong Zhang^3,*

CMC-Computers, Materials & Continua, Vol.70, No.2, pp. 3081-3097, 2022, DOI:10.32604/cmc.2022.019447 - 27 September 2021

Abstract Aim Alcoholism is a disease that a patient becomes dependent or addicted to alcohol. This paper aims to design a novel artificial intelligence model that can recognize alcoholism more accurately. Methods We propose the VGG-Inspired stochastic pooling neural network (VISPNN) model based on three components: (i) a VGG-inspired mainstay network, (ii) the stochastic pooling technique, which aims to outperform traditional max pooling and average pooling, and (iii) an improved 20-way data augmentation (Gaussian noise, salt-and-pepper noise, speckle noise, Poisson noise, horizontal shear, vertical shear, rotation, Gamma correction, random translation, and scaling on both raw image and… More >

G. Jayandhi^1,*, J.S. Leena Jasmine², S. Mary Joans²

Computer Systems Science and Engineering, Vol.40, No.2, pp. 491-503, 2022, DOI:10.32604/csse.2022.016376 - 09 September 2021

Abstract The most common form of cancer for women is breast cancer. Recent advances in medical imaging technologies increase the use of digital mammograms to diagnose breast cancer. Thus, an automated computerized system with high accuracy is needed. In this study, an efficient Deep Learning Architecture (DLA) with a Support Vector Machine (SVM) is designed for breast cancer diagnosis. It combines the ideas from DLA with SVM. The state-of-the-art Visual Geometric Group (VGG) architecture with 16 layers is employed in this study as it uses the small size of 3 × 3 convolution filters that reduces… More >

Mohammed A. Alghassab^*

CMC-Computers, Materials & Continua, Vol.70, No.1, pp. 637-652, 2022, DOI:10.32604/cmc.2022.019527 - 07 September 2021

Abstract Printed Circuit Boards (PCBs) are very important for proper functioning of any electronic device. PCBs are installed in almost all the electronic device and their functionality is dependent on the perfection of PCBs. If PCBs do not function properly then the whole electric machine might fail. So, keeping this in mind researchers are working in this field to develop error free PCBs. Initially these PCBs were examined by the human beings manually, but the human error did not give good results as sometime defected PCBs were categorized as non-defective. So, researchers and experts transformed this… More >

Faiz Ali Shah¹, Muhammad Attique Khan², Muhammad Sharif¹, Usman Tariq³, Aimal Khan⁴, Seifedine Kadry⁵, Orawit Thinnukool^6,*

CMC-Computers, Materials & Continua, Vol.70, No.1, pp. 1491-1507, 2022, DOI:10.32604/cmc.2022.019490 - 07 September 2021

Abstract Fruit diseases seriously affect the production of the agricultural sector, which builds financial pressure on the country's economy. The manual inspection of fruit diseases is a chaotic process that is both time and cost-consuming since it involves an accurate manual inspection by an expert. Hence, it is essential that an automated computerised approach is developed to recognise fruit diseases based on leaf images. According to the literature, many automated methods have been developed for the recognition of fruit diseases at the early stage. However, these techniques still face some challenges, such as the similar symptoms… More >

Habib Dhahri^1,2,*, Besma Rabhi³, Slaheddine Chelbi⁴, Omar Almutiry¹, Awais Mahmood¹, Adel M. Alimi³

CMC-Computers, Materials & Continua, Vol.69, No.3, pp. 3259-3274, 2021, DOI:10.32604/cmc.2021.018449 - 24 August 2021

Abstract The exponential increase in new coronavirus disease 2019 ({COVID-19}) cases and deaths has made COVID-19 the leading cause of death in many countries. Thus, in this study, we propose an efficient technique for the automatic detection of COVID-19 and pneumonia based on X-ray images. A stacked denoising convolutional autoencoder (SDCA) model was proposed to classify X-ray images into three classes: normal, pneumonia, and {COVID-19}. The SDCA model was used to obtain a good representation of the input data and extract the relevant features from noisy images. The proposed model’s architecture mainly composed of eight autoencoders, More >

Yu-Dong Zhang¹, Muhammad Attique Khan², Ziquan Zhu³, Shui-Hua Wang^4,*

CMC-Computers, Materials & Continua, Vol.69, No.3, pp. 3145-3162, 2021, DOI:10.32604/cmc.2021.018040 - 24 August 2021

Abstract (Aim) COVID-19 is an ongoing infectious disease. It has caused more than 107.45 m confirmed cases and 2.35 m deaths till 11/Feb/2021. Traditional computer vision methods have achieved promising results on the automatic smart diagnosis. (Method) This study aims to propose a novel deep learning method that can obtain better performance. We use the pseudo-Zernike moment (PZM), derived from Zernike moment, as the extracted features. Two settings are introducing: (i) image plane over unit circle; and (ii) image plane inside the unit circle. Afterward, we use a deep-stacked sparse autoencoder (DSSAE) as the classifier. Besides, multiple-way… More >

Muhammad Rizwan Latif¹, Muhamamd Attique Khan¹, Muhammad Younus Javed¹, Haris Masood², Usman Tariq³, Yunyoung Nam^4,*, Seifedine Kadry⁵

CMC-Computers, Materials & Continua, Vol.69, No.3, pp. 2917-2932, 2021, DOI:10.32604/cmc.2021.017364 - 24 August 2021

Abstract Globally, Pakistan ranks 4 in cotton production, 6 as an importer of raw cotton, and 3 in cotton consumption. Nearly 10% of GDP and 55% of the country's foreign exchange earnings depend on cotton products. Approximately 1.5 million people in Pakistan are engaged in the cotton value chain. However, several diseases such as Mildew, Leaf Spot, and Soreshine affect cotton production. Manual diagnosis is not a good solution due to several factors such as high cost and unavailability of an expert. Therefore, it is essential to develop an automated technique that can accurately detect and recognize these… More >

Ying Fu^1,2,*, Minxue Gong¹, Guang Yang¹, Hong Wei³, Jiliu Zhou^1,2

CMC-Computers, Materials & Continua, Vol.68, No.1, pp. 1359-1374, 2021, DOI:10.32604/cmc.2021.016536 - 22 March 2021

Abstract Generative adversarial networks (GANs) have considerable potential to alleviate challenges linked to data scarcity. Recent research has demonstrated the good performance of this method for data augmentation because GANs synthesize semantically meaningful data from standard signal distribution. The goal of this study was to solve the overfitting problem that is caused by the training process of convolution networks with a small dataset. In this context, we propose a data augmentation method based on an evolutionary generative adversarial network for cardiac magnetic resonance images to extend the training data. In our structure of the evolutionary GAN,… More >

Kangjik Kim¹, Hyunbin Kim¹, Junchul Chun¹, Mingoo Kang², Min Hong^3,*, Byungseok Min⁴

CMC-Computers, Materials & Continua, Vol.67, No.2, pp. 2547-2568, 2021, DOI:10.32604/cmc.2021.014642 - 05 February 2021

Abstract Physical contamination of food occurs when it comes into contact with foreign objects. Foreign objects can be introduced to food at any time during food delivery and packaging and can cause serious concerns such as broken teeth or choking. Therefore, a preventive method that can detect and remove foreign objects in advance is required. Several studies have attempted to detect defective products using deep learning networks. Because it is difficult to obtain foreign object-containing food data from industry, most studies on industrial anomaly detection have used unsupervised learning methods. This paper proposes a new method… More >

Kashif Iqbal^1,2, Sagheer Abbas¹, Muhammad Adnan Khan^3,*, Atifa Athar⁴, Muhammad Saleem Khan¹, Areej Fatima³, Gulzar Ahmad¹

CMC-Computers, Materials & Continua, Vol.66, No.2, pp. 1595-1612, 2021, DOI:10.32604/cmc.2020.013231 - 26 November 2020

Abstract The rapid development and progress in deep machine-learning techniques have become a key factor in solving the future challenges of humanity. Vision-based target detection and object classification have been improved due to the development of deep learning algorithms. Data fusion in autonomous driving is a fact and a prerequisite task of data preprocessing from multi-sensors that provide a precise, well-engineered, and complete detection of objects, scene or events. The target of the current study is to develop an in-vehicle information system to prevent or at least mitigate traffic issues related to parking detection and traffic… More >