Adan Vega, Ernesto Escobar, Amaly Fong, Ninshu Ma, Hidekazu Murakawa

CMES-Computer Modeling in Engineering & Sciences, Vol.90, No.3, pp. 197-210, 2013, DOI:10.3970/cmes.2013.090.197

Abstract This paper describes the effect of previous heating on inherent deformation by following heating, more specifically, the case of two heating lines applied parallel to each other. The novelty of the work lies in revealing the parallel effect and how, factors such as, for example, the heating condition and the plate geometry, influence the resulting inherent deformation of parallel heating. In addition, relationships to easily get these influences are provided. The results are suitable for a wide range of heating conditions and plate thickness. More >

A. Merabtine¹, S. Mokraoui¹, R. Benelmir¹, N. Laraqi²

FDMP-Fluid Dynamics & Materials Processing, Vol.8, No.2, pp. 215-240, 2012, DOI:10.3970/fdmp.2012.008.215

Abstract Modeling of the thermal behavior of buildings needs effective strategies of analysis and tools. This is particularly true when conduction of heat through walls and/or slabs has to be properly taken into account. This article is concerned with a new modeling strategy for solving the transient heat conduction equation in a finite medium (with extensive background application to the different elements of a building structure). The developed approach is based on the Bond Graph technique, a graphical modeling language which is particularly suitable to the treatment of problems involving energy transfer. With this model, two More >

Michael Y. Y. Hung

The International Conference on Computational & Experimental Engineering and Sciences, Vol.20, No.1, pp. 11-12, 2011, DOI:10.3970/icces.2011.020.011

Abstract Aging of tall buildings has serious safety concerns. One of the potential hazards is loosened tiles (or external finishing) falling off the external wall of buildings. This can be life-threatening to passers-by. A major cause for this is inadequate bonding during tiling, or degradation of the bonded interface due to aging. It is therefore important to be able to detect and identify areas where the tiles are likely to detach from the external walls and take preventive measures. Current inspection methods primarily rely on human inspectors to tap every piece of tile, and listen for… More >

Surya R. Kalidindi^1,2,3, Stephen R. Niezgoda¹, Giacomo L,i^1,1, Tony Fast¹

CMC-Computers, Materials & Continua, Vol.17, No.2, pp. 103-126, 2010, DOI:10.3970/cmc.2010.017.103

Abstract This paper presents a novel mathematical framework for building a comprehensive materials knowledge system (MKS) to extract, store and recall hierarchical structure-property-processing linkages for a broad range of material systems. This new framework relies heavily on the use of computationally efficient FFT (Fast Fourier Transforms)-based algorithms for data-mining local structure-response-structure evolution linkages from large numerical datasets produced by established modelling strategies for microscale phenomena. Another salient feature of this new framework is that it facilitates flow of high fidelity information in both directions between the constituent length scales, and thereby offers a new strategy for More >

S.C. Wang¹, C.S. Lin²

The International Conference on Computational & Experimental Engineering and Sciences, Vol.7, No.4, pp. 189-196, 2008, DOI:10.3970/icces.2008.007.189

Abstract Protecting against basement fires in commercial buildings is of major concern in Taiwan. Basements typically fill with high-temperature dense smoke rapidly during a fire, frequently generating deadly conditions that hinder escape from a fire. The water-mist fire suppression system (WMFSS) is a highly efficient fire suppression device that enhances the safety of people during a basement fire. The tiny water droplets with various diameters can absorb large amount of heat and the water vapors can prevent the occurrence of flashover during a building fire. This study investigates fire-suppression characteristics using a WMFSS in a basement… More >

Roberta Apostolska¹, Golubka Necevska-Cvetanovska²

The International Conference on Computational & Experimental Engineering and Sciences, Vol.5, No.2, pp. 129-136, 2008, DOI:10.3970/icces.2008.005.129

Abstract The IZIIS' contribution to development of high quality materials has been seen in realization of several scientific-research projects in the field of high strength concrete in the period from 1992 to 2006. Within the frames of these projects complex laboratory-experimental-analytical investigations have been performed to contribute to definition of the methodology for obtaining high stength concrete exclusively from domestic resources, to investigate joint behaviour of high strength materials and elements in nonlinear range as well as to define dynamic behaviour high strength concrete buildings exposed to seismic actions. The selected results from these investigations are More >

Tienfuan Kerh^1,2, J.S. Lai¹, D. Gunaratnam², R. Saunders²

CMES-Computer Modeling in Engineering & Sciences, Vol.26, No.1, pp. 1-12, 2008, DOI:10.3970/cmes.2008.026.001

Abstract Taiwan frequently suffers from strong ground motion, and the current building code is essentially based on two seismic zones, A and B. The design value of horizontal acceleration for zone A is 0.33g, and the value for zone B is 0.23g. To check the suitability of these values, a series of actual earthquake records are considered for evaluating peak ground acceleration (PGA) for each of the zones by using neural network models. The input parameters are magnitude, epicenter distance, and focal depth for each of the checking stations, and the peak ground acceleration is calculated… More >

A. Soprano¹, F. Caputo¹

Structural Durability & Health Monitoring, Vol.2, No.1, pp. 51-68, 2006, DOI:10.3970/sdhm.2006.002.051

Abstract This work describes the results of the experience acquired by the authors during their participation to some among the European research programs with the aim to develop a probabilistic risk assessment procedure to analyse the spreading of fatigue-induced damage in typical aeronautical components. The several steps of the procedure are pointed out, and especially the modelling of the damage evolutionary process; the initiation and the transitional probabilities, which characterize the passage from one damage level to a higher one, are fully characterized and their dependence from time and from the damage state of surrounding zones More >