Arafat A. Bhuiyan^a,c, M. Ruhul Amin^b, Jamal Naser^c, A. K. M. Sadrul Islam^a

Frontiers in Heat and Mass Transfer, Vol.6, pp. 1-11, 2015, DOI:10.5098/hmt.6.5

Abstract In this study, the effects of thermal and hydraulic characteristics of wavy fin and tube heat exchanger are investigated. Simulation has been carried out by a commercial computational fluid dynamics code, ANSYS CFX12.0. The main objective of this study is to investigate the flow characteristics in turbulent flow. Results are predicted for the turbulent flow regime (2100≤Re≤7000) and compared with author’s previous work for laminar (400 ≤Re≤1200) and transitional (1300≤Re≤2000) flow regime. Regarding turbulence, the k-ω model was used to predict the turbulent flow characteristics with 5% turbulence intensity. Predicted results were compared with the More >

Rubim MAL¹, PR Isolino Sampaio¹, P Parolin^2,3

Phyton-International Journal of Experimental Botany, Vol.84, No.1, pp. 244-251, 2015, DOI:10.32604/phyton.2015.84.244

Abstract Fish is a very important part of the human diet in Amazonia. Near the growing cities, fish populations and individual size have decreased over the past decades. Alternatives to traditional and industrial fishing arise, including fish farming. Strategies to minimize the impact of fish farms on the environment are needed to have a regular and healthy fish supply. This is to avoid a reduction of biodiversity, a depletion of natural resources, and/or the induction of significant changes in the structure and functioning of adjacent ecosystems. Very little research has been performed on management of effluents… More >

Cong Xie¹, Guangyu Shi^1,2

CMES-Computer Modeling in Engineering & Sciences, Vol.108, No.6, pp. 397-427, 2015, DOI:10.3970/cmes.2015.108.397

Abstract The static and dynamic thermoelastic analyses of the beams made of functionally graded materials (FGMs) are presented in this paper. Based on the refined third-order shear deformation beam theory proposed by the senior author and the variational principle, the governing equations of FG beams are deduced. The influence of temperature on Young’s modulus and coefficients of thermal expansion is taken into account when FG beams are subjected to thermal loading. The resulting governing equations are a system of the eighth-order differential equations in terms of displacement variables, and the thermoelastic coupling is included in the… More >

Huan Wang¹, Weifeng Yuan^2,3, Fei Jia²

CMC-Computers, Materials & Continua, Vol.47, No.1, pp. 31-43, 2015, DOI:10.3970/cmc.2015.047.031

Abstract Compared with dealing with a linear system, solving a nonlinear system equation in numerical simulation requires generally more CPU time since iterative approach is usually used in the latter. To cut down the computing cost, a direct way is to reduce the degree of freedoms (DOF) of the problem under investigation. However, this kind of treatment may result in poorer accuracy. In this manuscript, a macro element method is proposed to improve computational efficiency in large-scaled nonlinear analysis. When this concept is incorporated into finite element analysis (FEA), all the members in the linear zones More >

Ravishankar Sathyamurthy^a,*, P.K. Nagarajan^b, Hyacinth J. Kennady^a, T.S. Ravikumar^a, V. Paulson^c, Amimul Ahsan^d

Frontiers in Heat and Mass Transfer, Vol.5, pp. 1-5, 2014, DOI:10.5098/hmt.5.3

Abstract This paper presents the method of improvement of enhancing the performance of triangular pyramid solar still with and without latent heat energy storage. For comparing the productivity of solar still with and without LHTESS a solar still is designed, fabricated. Experiments are conducted in hot and humid climate of Chennai, India. Paraffin wax is used as LHTESS due to its feasible general and economic properties. The hourly productivity is slightly higher in case of solar still without LHTESS during sunny days. There is an increase of about 35% in production of fresh water with LHTESS More >

Díaz-López E¹, JM Loeza-Corte², I Brena-Hernández², JM Campos Pastelín², IJ Orlando-Guerrero², G Salgado-Benítez³

Phyton-International Journal of Experimental Botany, Vol.83, pp. 171-178, 2014, DOI:10.32604/phyton.2014.83.171

Abstract The Toluca´s México valley is considered a high valley because it is situated at 2560 m.a.s.l. In this region, maize is the most important crop; free pollination [Yellow, red, blue and flour maize (Cacahuacintle)] and hybrid materials are grown. Corn yield is negatively affected by an inadequate P fertilization. The aim of this study was to determine the agronomic effectiveness of phosphorus in terms of biomass and yield on three cultivars of maize as a function of six levels of phosphorus fertilization in the Toluca´s valley, Mexico. The materials Amarillo Almoloya, Cacahuacintle and Cóndor were More >

Foued Chabane^a,b,*,†, Noureddine Moummi^a,b, Abdelhafid Brima^a,b, Said Benramache^c

Frontiers in Heat and Mass Transfer, Vol.4, No.1, pp. 1-6, 2013, DOI:10.5098/hmt.v4.1.3006

Abstract This paper presents an experimental thermal efficiency analysis for a novel flat plate solar air heater with several mass flow rates. The aims are to review of designed and analyzed a thermal efficiency of flat-plate solar air heaters. The measured parameters were the inlet and outlet temperatures, the absorbing plate temperatures, the ambient temperature, and the solar radiation. Further, the measurements were performed at different values of mass flow rate of air in flow channel duct. After the analysis of the results, the optimal value of efficiency is higher level of mass flow rate equal… More >

Shihong Zhang^*，Zhihua Wang

Frontiers in Heat and Mass Transfer, Vol.4, No.2, pp. 1-6, 2013, DOI:10.5098/hmt.v4.2.3005

Abstract This article discussed exhaust gas temperature and pollutant emissions characteristics of the combustion of rich natural gas-air mixtures in Pd metal based honeycomb monoliths burner during the period of start-up process. The burner needs to be ignited by gas phase combustion with the excessive air coefficient (a) at 1.3. The chemistry at work in the monoliths was then investigated using the stagnation point flow reactor or SPFR. The experimental results in catalytic monolith can be explained from SPFR. The exhaust gas temperature and pollutant emissions were measured by thermocouple K of diameter 0.5 and the More >

Arafat A. Bhuiyan^a,1, A. K. M. Sadrul Islam^a, M. Ruhul Amin^b

Frontiers in Heat and Mass Transfer, Vol.3, No.3, pp. 1-9, 2012, DOI:10.5098/hmt.v3.3.3006

Abstract This numerical analysis presents the airside performance of a wavy fin-and-tube heat exchanger having 4 row configurations considering steady, incompressible and 3D flow using Commercial CFD Code ANSYS CFX 12.0. Results are presented in the form of friction factor (f), Colburn factor (j) and efficiency index (j/f). The numerical procedure has been validated by comparison with published numerical and experimental results and good agreement has been observed. A series of numerical calculations have been carried out in order to analyze the influence of various geometric characteristics on different fields as well as on the heat More >

Alexandre Vaudrey^a,*, Philippe Baucour^b, François Lanzetta^b, Raynal Glises^b

Frontiers in Heat and Mass Transfer, Vol.3, No.3, pp. 1-8, 2012, DOI:10.5098/hmt.v3.3.3001

Abstract Producing electrical work in consuming chemical energy, the fuel cell (FC) is forced by the 2^nd law to reject heat to its surrounding. However, as it occurs for any other type of engine, this thermal energy cannot be exchanged in an isothermal way in finite time or through finite areas. As it was already done for various types of systems, including chemical engines, the fuel cell is here studied within the finite time thermodynamics framework. An endoreversible fuel cell is then defined, internally reversible but producing entropy during heat exchanges with its ambiance. Considering usual H₂/O₂… More >