Hanan Abdullah Mengash¹, Hamed Alqahtani², Mohammed Maray³, Mohamed K. Nour⁴, Radwa Marzouk¹, Mohammed Abdullah Al-Hagery⁵, Heba Mohsen⁶, Mesfer Al Duhayyim^7,*

CMC-Computers, Materials & Continua, Vol.75, No.3, pp. 4805-4820, 2023, DOI:10.32604/cmc.2023.037810

Abstract With the flexible deployment and high mobility of Unmanned Aerial Vehicles (UAVs) in an open environment, they have generated considerable attention in military and civil applications intending to enable ubiquitous connectivity and foster agile communications. The difficulty stems from features other than mobile ad-hoc network (MANET), namely aerial mobility in three-dimensional space and often changing topology. In the UAV network, a single node serves as a forwarding, transmitting, and receiving node at the same time. Typically, the communication path is multi-hop, and routing significantly affects the network’s performance. A lot of effort should be invested in performance analysis for selecting… More >

Mohammed Basheri, Mahmoud Ragab^*

Computer Systems Science and Engineering, Vol.46, No.3, pp. 3783-3798, 2023, DOI:10.32604/csse.2023.037130

Abstract The Internet of Things (IoT) is one of the emergent technologies with advanced developments in several applications like creating smart environments, enabling Industry 4.0, etc. As IoT devices operate via an inbuilt and limited power supply, the effective utilization of available energy plays a vital role in designing the IoT environment. At the same time, the communication of IoT devices in wireless mediums poses security as a challenging issue. Recently, intrusion detection systems (IDS) have paved the way to detect the presence of intrusions in the IoT environment. With this motivation, this article introduces a novel Quantum Cat Swarm Optimization… More >

Sheng Xiao^1,*, Yong Chen², Jing He³, Xi Yang⁴

Computer Systems Science and Engineering, Vol.46, No.3, pp. 3527-3540, 2023, DOI:10.32604/csse.2023.027081

Abstract Read-write dependency is an important factor restricting software efficiency. Timing Speculative (TS) is a processing architecture aiming to improve energy efficiency of microprocessors. Timing error rate, influenced by the read-write dependency, bottlenecks the voltage down-scaling and so the energy efficiency of TS processors. We proposed a method called Read-Write Dependency Aware Register Allocation. It is based on the Read-Write Dependency aware Interference Graph (RWDIG) conception. Registers are reallocated to loosen the read-write dependencies, so resulting in a reduction of timing errors. The traditional no operation (Nop) padding method is also redesigned to increase the distance value to above 2. We… More >

Daoming Shen^1,*, Jinhong Xia¹, Chao Gui¹, Songtao Xue²

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.7, pp. 1863-1873, 2023, DOI:10.32604/fdmp.2023.024925

Abstract In order to ensure the safe operation of the compressors used in water chillers, in the present study some interlock protections have been added to the related design. These include a low pressure protection, a high pressure protection, an exhaust temperature protection and a differential pressure protection. Some tests have been conducted by tuning the saturation suction and exhaust temperatures of the compressor through adjustment of the cold source outlet temperature and the ambient temperature. The results show that the ambient temperature increases with decreasing device load and increasing fan speed under the same saturated suction temperature; the device refrigerating… More > Graphic Abstract

Ahmed Najat Ahmed¹, JinHyung Kim², Yunyoung Nam^3,*, Mohamed Abouhawwash^4,5

Computer Systems Science and Engineering, Vol.46, No.2, pp. 2527-2542, 2023, DOI:10.32604/csse.2023.036106

Abstract In this current century, most industries are moving towards automation, where human intervention is dramatically reduced. This revolution leads to industrial revolution 4.0, which uses the Internet of Things (IoT) and wireless sensor networks (WSN). With its associated applications, this IoT device is used to compute the received WSN data from devices and transfer it to remote locations for assistance. In general, WSNs, the gateways are a long distance from the base station (BS) and are communicated through the gateways nearer to the BS. At the gateway, which is closer to the BS, energy drains faster because of the heavy… More >

Mohamed Amine Ouamri^1,2, Reem Alkanhel^3,*, Daljeet Singh⁴, El-sayed M. El-kenaway⁵, Sherif S. M. Ghoneim⁶

Computer Systems Science and Engineering, Vol.46, No.1, pp. 73-92, 2023, DOI:10.32604/csse.2023.034461

Abstract Increasing the coverage and capacity of cellular networks by deploying additional base stations is one of the fundamental objectives of fifth-generation (5G) networks. However, it leads to performance degradation and huge spectral consumption due to the massive densification of connected devices and simultaneous access demand. To meet these access conditions and improve Quality of Service, resource allocation (RA) should be carefully optimized. Traditionally, RA problems are nonconvex optimizations, which are performed using heuristic methods, such as genetic algorithm, particle swarm optimization, and simulated annealing. However, the application of these approaches remains computationally expensive and unattractive for dense cellular networks. Therefore,… More >

Arslan Iftikhar¹, M. A. Elmagzoub², Ansar Munir^1,*, Hamad Abosaq Al Salem², Mahmood ul Hassan³, Jarallah Alqahtani², Asadullah Shaikh²

Computer Systems Science and Engineering, Vol.46, No.1, pp. 1153-1168, 2023, DOI:10.32604/csse.2023.030802

Abstract In every network, delay and energy are crucial for communication and network life. In wireless sensor networks, many tiny nodes create networks with high energy consumption and compute routes for better communication. Wireless Sensor Networks (WSN) is a very complex scenario to compute minimal delay with data aggregation and energy efficiency. In this research, we compute minimal delay and energy efficiency for improving the quality of service of any WSN. The proposed work is based on energy and distance parameters as taken dependent variables with data aggregation. Data aggregation performs on different models, namely Hybrid-Low Energy Adaptive Clustering Hierarchy (H-LEACH),… More >

Fadhil Mukhlif^1,*, Ashraf Osman Ibrahim², Norafida Ithnin¹, Roobaea Alroobaea³, Majed Alsafyani³

CMC-Computers, Materials & Continua, Vol.74, No.3, pp. 5589-5606, 2023, DOI:10.32604/cmc.2023.034323

Abstract Due to the fact that network space is becoming more limited, the implementation of ultra-dense networks (UDNs) has the potential to enhance not only network coverage but also network throughput. Unmanned Aerial Vehicle (UAV) communications have recently garnered a lot of attention due to the fact that they are extremely versatile and may be applied to a wide variety of contexts and purposes. A cognitive UAV is proposed as a solution for the Internet of Things ground terminal’s wireless nodes in this article. In the IoT system, the UAV is utilised not only to determine how the resources should be… More >

Unique Karki^*, Bhaskaran Gopalakrishnan

Energy Engineering, Vol.120, No.2, pp. 345-365, 2023, DOI:10.32604/ee.2023.025600

Abstract Industrial applications that require steam for their end-use generally utilize steam boilers that are typically oversized, citing operations flexibility. Similarly, gas turbine-based power plants corroborate a gas turbine system that may eventually relieve the usable exhaust into the atmosphere. This study explores the economic and technical feasibility of a topping cycle combined heat and power (CHP) system. It does so by leveraging a partially loaded boiler or gas turbine by increasing its unused load to generate steam and heat for subsequent usage. To this end, a decision support tool (COGENTEC) was developed, which emulates a given facility’s boiler or gas-turbine… More > Graphic Abstract

K. Karthikeyan^1,*, Liyakathunisa², Eman Aljohani², Thavavel Vaiyapuri³

Computer Systems Science and Engineering, Vol.45, No.2, pp. 1641-1654, 2023, DOI:10.32604/csse.2023.031582

Abstract Cloud data centers consume high volume of energy for processing and switching the servers among different modes. Virtual Machine (VM) migration enhances the performance of cloud servers in terms of energy efficiency, internal failures and availability. On the other end, energy utilization can be minimized by decreasing the number of active, underutilized sources which conversely reduces the dependability of the system. In VM migration process, the VMs are migrated from underutilized physical resources to other resources to minimize energy utilization and optimize the operations. In this view, the current study develops an Improved Metaheuristic Based Failure Prediction with Virtual Machine… More >